[U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value

[Fabio Estevam]

Hi Stefano,

On Sat, Apr 27, 2013 at 8:09 AM, Stefano Babic <sbabic at denx.de> wrote:

> I agree that we have not yet found a clear cause of the behavior - but
> ler me say that is quite bound to the hardware and how voltage is
> applied to the DDR. As the patch reports to allow to boot kernel in most
> cases, I agree with Fabio to apply this - and IMHO most investigation
> should be done by the hardware developers.

100% agreed. The patch I proposed can be seen as a workaround, not a real fix.

Applying it will give the benefit of allowing mx23 to boot a kernel
again, and then we can focus on the real fix, which requires a more
careful and detailed investigation.

Thanks,

Fabio Estevam