[U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers
Stefano Babic
sbabic at denx.de
Wed Apr 10 08:23:11 CEST 2013
On 10/04/2013 00:44, Philip Paeps wrote:
> This makes mxc_iomux_set_input() work correctly. Previously, the
> incorrect offset of IOMUXSW_INPUT_CTL caused mxc_iomux_set_input()
> to write to the wrong register, possibly resulting in unexpected
> behaviour.
>
> Signed-off-by: Philip Paeps <philip at paeps.cx>
> ---
Hi Philip,
> Changes in v2:
> - While here, also correct the offset of the last pad control
> register. This is mostly cosmetic.
>
> arch/arm/cpu/arm1136/mx35/iomux.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c
> index a302575..698909e 100644
> --- a/arch/arm/cpu/arm1136/mx35/iomux.c
> +++ b/arch/arm/cpu/arm1136/mx35/iomux.c
> @@ -34,8 +34,8 @@ enum iomux_reg_addr {
> IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4, /* MUX control */
> IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324, /* last MUX control */
> IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328, /* Pad control */
> - IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794, /* last Pad control */
> - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC, /* input select */
> + IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x7A4, /* last Pad control */
> + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7A8, /* input select */
> IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4, /* last input select */
> };
You're right, offset were wrong.
Acked-by: Stefano Babic <sbabic at denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list