[U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support

[Marek Vasut]

Dear Vivek Gautam,

> Based on 'u-boot-usb' master branch.
> 
> This patch-series includes majorly some clean-up, few fixes and
> then some basic super-speed usb infrastructure addition, to help
> put support for XHCI in near future.
> 
> Changes from v2:
>  - Added a patch "usb: common: Weed out USB_**_PRINTFs from usb framework"
>    to replace USB_***_PRINTF with debug() so as to get rid of unnecessary
>    DEBUG macros in usb common framework and thereby rebasing other patches
>    on top of this so that no USB_PRINTF appears further.
>  - Added a patch to reset only USB 2.0 ports, since USB 3.0 protocol ports
>    don't require a reset to happen to move to 'enabled' state.
>  - Added a patch to move definition of 'min3()' out of ehci-hcd and putting
>    the same as macro definition in common header.
>  - Using a 'switch-case' in portspeed() in cmd_usb.c
> 
> Changes from v1:
>  - Fixing the issue with 'ifno' as well as added 'if_desc'.
>  - Instead of turning-on only powered-off hub ports, power-cycle all
>    the hub ports (aka: turning off and then turning on again power to
>    all the ports.
>  - Fixing commenting style problem in
>    'usb: Update device class in usb device's descriptor'
>  - Fixing typo in commit message for
>    'usb: hub: Fix enumration timeout'
>  - Removing separate definition for 'struct usb_ep_desc'; thereby adding
>    'struct usb_ss_ep_comp_descriptor' to 'struct usb_interface' only.
>    As a result modifying the patch accordingly also dropping the patch
>    'usb: eth: Fix for updated usb interface descriptor structure'
>  - Dropping the patch 'usb: hub: Increase device enumeration timeout for
> broken drives' for now (will come back with a solution at later point of
> time).

Applied all but the last one, let's now base all subsequent patches on u-boot-
usb/next please.

Best regards,
Marek Vasut