[U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
benoit.thebaudeau at advansee.com
Thu Apr 4 16:05:27 CEST 2013
Hi Albert,
On Thursday, April 4, 2013 11:07:23 AM, Albert ARIBAUD wrote:
> Hi Benoît,
>
> On Wed, 3 Apr 2013 08:30:12 +0200 (CEST), Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
>
> > The resulting HEAD is identical to yours, except for
> > board/freescale/mx31ads/u-boot.lds in which you had removed the following
> > unrelated line for 30/30:
> > __bss_end = .;
> >
> > Regarding this line, it is also present in a few other .lds, as well as the
> > following ones:
> > KEEP(*(.__bss_start));
> > KEEP(*(__bss_end));
> >
> > However, the end section is named .__bss_end in arch/arm/lib/bss.c, so
> > there is
> > perhaps something wrong here, unless you did that on purpose because of the
> > __bss_end test at the end of the linker script. I had noticed that, but I
> > let
> > you handle it. If something needs to be changed here, please do it after my
> > series if possible in order to avoid a v11 because of newer rebase
> > conflicts. ;)
>
> I have a patch ready and currently undergoing build and run tests. As
> per http://www.denx.de/wiki/view/U-Boot/Patches#Review_Process_Git_Tags,
> I must ask your permission to add your 'Reported-By:' in my patch. Can I?
Sure:
Reported-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Best regards,
Benoît
More information about the U-Boot
mailing list