[U-Boot] [PATCH 3/3] cm-t35: update config file

[Igor Grinberg]

Several minor updates to the cm-t35 config file.

Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
Tested-by: Nikita Kiryanov <nikita at compulab.co.il>
---
 include/configs/cm_t35.h |   18 +++++-------------
 1 files changed, 5 insertions(+), 13 deletions(-)

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 726714d..c6e357a 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -135,12 +135,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT		"nand0=nand"
 #define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
-				"1920k(u-boot),128k(u-boot-env),"\
+				"1920k(u-boot),256k(u-boot-env),"\
 				"4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
@@ -182,14 +182,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY		10
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -204,9 +196,9 @@
 	"defaultdisplay=dvi\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
-	"nandrootfstype=jffs2\0" \
+	"nandrootfstype=ubifs\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"mpurate=${mpurate} " \
 		"vram=${vram} " \
@@ -232,7 +224,7 @@
 		"bootm ${loadaddr}\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
+		"nand read ${loadaddr} 2a0000 400000; " \
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-- 
1.7.3.4