[U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value

Fabio Estevam festevam at gmail.com
Fri Apr 26 18:01:26 CEST 2013


From: Fabio Estevam <fabio.estevam at freescale.com>

commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR voltage 
level, which causes mx23evk to fail to load a kernel.

Put back the original values, so that mx23evk can boot a kernel again.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index bc2d69c..4950490 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -234,7 +234,7 @@ static void mx23_mem_setup_vddmem(void)
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_ILIMIT |
 		POWER_VDDMEMCTRL_ENABLE_LINREG |
 		POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -242,7 +242,7 @@ static void mx23_mem_setup_vddmem(void)
 
 	early_delay(10000);
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_LINREG,
 		&power_regs->hw_power_vddmemctrl);
 }
-- 
1.7.9.5



More information about the U-Boot mailing list