[U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h

Fabio Estevam festevam at gmail.com
Thu Apr 25 02:44:27 CEST 2013


From: Fabio Estevam <fabio.estevam at freescale.com>

imx-regs.h is more appropriate location for containing register masks. 

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/include/asm/arch-mx5/imx-regs.h |    2 ++
 board/freescale/mx53ard/mx53ard.c        |    2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index a71cc13..6aff3be 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -267,6 +267,8 @@
 /* M4IF */
 #define M4IF_FBPM0	0x40
 #define M4IF_FIDBP	0x48
+#define M4IF_GENP_WEIM_MM_MASK		0x00000001
+#define WEIM_GCR2_MUX16_BYP_GRANT_MASK	0x00001000
 
 /* Assuming 24MHz input clock with doubler ON */
 /*                            MFI         PDF */
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 8d433a3..32c4d5f 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -62,8 +62,6 @@ void dram_init_banksize(void)
 static void setup_iomux_nand(void)
 {
 	u32 i, reg;
-	#define M4IF_GENP_WEIM_MM_MASK		0x00000001
-	#define WEIM_GCR2_MUX16_BYP_GRANT_MASK	0x00001000
 
 	reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
 	reg &= ~M4IF_GENP_WEIM_MM_MASK;
-- 
1.7.9.5



More information about the U-Boot mailing list