[U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL

[Benoît Thébaudeau]

Hi Fabio,

On Tuesday, April 9, 2013 6:40:45 PM, Fabio Estevam wrote:
> Hi Benoît,
> 
> On Tue, Apr 9, 2013 at 11:38 AM, Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
> 
> > Can you try different values for the following configs in mx31pdk.h?
> >  - CONFIG_SYS_NAND_U_BOOT_SIZE
> >  - CONFIG_SPL_TEXT_BASE
> >  - CONFIG_SYS_TEXT_BASE
> >  - (CONFIG_ENV_OFFSET)
> >  - (CONFIG_ENV_OFFSET_REDUND)
> >
> > I would try:
> >  - 0x40000 for CONFIG_SYS_NAND_U_BOOT_SIZE
> >  - 0x86000000 for CONFIG_SPL_TEXT_BASE
> >  - 0x87000000 for CONFIG_SYS_TEXT_BASE
> 
> Thanks, that did the trick!
> 
> With the changes below I am able to get into the U-boot prompt:
> 
> diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
> index 8f12825..d82bf65 100644
> --- a/include/configs/mx31pdk.h
> +++ b/include/configs/mx31pdk.h
> @@ -51,8 +51,8 @@
>  #define CONFIG_SPL_MAX_SIZE	2048
>  #define CONFIG_SPL_NAND_SUPPORT
> 
> -#define CONFIG_SPL_TEXT_BASE	0x87ec0000
> -#define CONFIG_SYS_TEXT_BASE	0x87f00000
> +#define CONFIG_SPL_TEXT_BASE	0x86000000
> +#define CONFIG_SYS_TEXT_BASE	0x87000000
> 
>  #ifndef CONFIG_SPL_BUILD
>  #define CONFIG_SKIP_LOWLEVEL_INIT
> @@ -69,8 +69,6 @@
> 
>  #define CONFIG_MXC_UART
>  #define CONFIG_MXC_UART_BASE	UART1_BASE
> -#define CONFIG_HW_WATCHDOG
> -#define CONFIG_IMX_WATCHDOG
>  #define CONFIG_MXC_GPIO
> 
>  #define CONFIG_HARD_SPI
> @@ -199,7 +197,7 @@
> 
>  /* Start copying real U-boot from the second page */
>  #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
> -#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x32000
> +#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x40000
>  /* Load U-Boot to this address */
>  #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
>  #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST

Cool, then we need to determine the minimal change set required for v11, so can
you retry with fewer of those changes to determine which ones are strictly
necessary (apart from the watchdog removal that we already know is required)?

What is the size of u-boot-with-spl.bin without DEBUG?

Regarding the watchdog removal, it is unrelated to this patch, so do you want me
to add a patch for it in this series, or will you handle it separately? And is
the correct change to remove it as above, or to change its time-out somewhere? I
think that it's probably better if you take care of this separately.

Best regards,
Benoît