[U-Boot] [PATCH v3 3/3] Add TI816X evm board support
Andrew Dyer
amdyer at gmail.com
Fri Apr 12 17:47:30 CEST 2013
On Fri, Apr 12, 2013 at 7:10 AM, TENART Antoine <atenart at adeneo-embedded.com
> wrote:
> Signed-off-by: Antoine Tenart <atenart at adeneo-embedded.com>
> ---
> MAINTAINERS | 4 +
> arch/arm/include/asm/arch-am33xx/spl.h | 9 +
> board/ti/ti816x/Makefile | 48 ++
> board/ti/ti816x/evm.c | 866
> ++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/ti816x_evm.h | 177 +++++++
> 6 files changed, 1105 insertions(+)
> create mode 100644 board/ti/ti816x/Makefile
> create mode 100644 board/ti/ti816x/evm.c
> create mode 100644 include/configs/ti816x_evm.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6b2202c..3aaac7f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -922,6 +922,10 @@ Lucas Stach <dev at lynxeye.de>
>
> colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core)
>
> +Antoine Tenart <atenart at adeneo-embedded.com>
> +
> + TI816X ARM ARMV7 (TI816x Soc)
> +
> Nick Thompson <nick.thompson at gefanuc.com>
>
> da830evm ARM926EJS (DA830/OMAP-L137)
> diff --git a/arch/arm/include/asm/arch-am33xx/spl.h
> b/arch/arm/include/asm/arch-am33xx/spl.h
> index 9b5fe9e..d0c1ec9 100644
> --- a/arch/arm/include/asm/arch-am33xx/spl.h
> +++ b/arch/arm/include/asm/arch-am33xx/spl.h
> @@ -23,6 +23,14 @@
> #ifndef _ASM_ARCH_SPL_H_
> #define _ASM_SPL_H_
>
> +#if defined(CONFIG_TI816X)
> +#define BOOT_DEVICE_XIP 2
> +#define BOOT_DEVICE_NAND 3
> +#define BOOT_DEVICE_MMC1 6
> +#define BOOT_DEVICE_MMC2 5
> +#define BOOT_DEVICE_UART 0x43
> +#define BOOT_DEVICE_MMC2_2 0xFF
> +#else
> #define BOOT_DEVICE_XIP 2
> #define BOOT_DEVICE_NAND 5
> #ifdef CONFIG_AM33XX
> @@ -37,3 +45,4 @@
> #define BOOT_DEVICE_CPGMAC 70
> #define BOOT_DEVICE_MMC2_2 0xFF
> #endif
> +#endif
> diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile
> new file mode 100644
> index 0000000..59128ee
> --- /dev/null
> +++ b/board/ti/ti816x/Makefile
> @@ -0,0 +1,48 @@
> +#
> +# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
> +# Antoine Tenart, <atenart at adeneo-embedded.com>
> +#
> +# Based on TI-PSP-04.00.02.14 :
> +#
> +# Copyright (C) 2009, Texas Instruments, Incorporated
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation version 2.
> +#
> +# This program is distributed "as is" WITHOUT ANY WARRANTY of any
> +# kind, whether express or implied; without even the implied warranty
> +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS := evm.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +clean:
> + rm -f $(OBJS)
> +
> +distclean: clean
> + rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> +
> diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
> new file mode 100644
> index 0000000..bb9d604
> --- /dev/null
> +++ b/board/ti/ti816x/evm.c
> @@ -0,0 +1,866 @@
> +/*
> + * evm.c
> + *
> + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
> + * Antoine Tenart, <atenart at adeneo-embedded.com>
> + *
> + * Based on TI-PSP-04.00.02.14 :
> + *
> + * Copyright (C) 2009, Texas Instruments, Incorporated
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +#include <asm/cache.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/ddr_defs.h>
> +#include <asm/arch/hardware.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/mmc_host_def.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mux.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
> +static void ddr3_sw_levelling(int emif);
> +#endif
> +
> +int board_init(void)
> +{
> + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
> + return 0;
> +}
> +
> +#if defined(CONFIG_SPL_BUILD)
> +
> +static struct module_pin_mux mmc_pin_mux[] = {
> + { OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) },
> + { OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) },
> + { OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) },
> + { OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) },
> + { OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) },
> + { OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) },
> + { OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) },
> + { -1 },
> +};
> +
> +const struct dmm_lisa_map_regs evm_lisa_map_regs = {
> + .dmm_lisa_map_0 = 0x00000000,
> + .dmm_lisa_map_1 = 0x00000000,
> + .dmm_lisa_map_2 = 0x80640300,
> + .dmm_lisa_map_3 = 0xC0640320,
> +};
> +
> +/*
> + * Routine: delay
> + * Description: spinning delay to use before udelay works
> + */
> +static inline void delay(unsigned long loops)
> +{
> + __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
> + "bne 1b" : "=r" (loops) : "0"(loops));
> +}
> +
> +/* assume delay is aprox at least 1us */
> +void ddr_delay(int d)
> +{
> + int i;
> +
> + /*
> + * read a control module register.
> + * this is a bit more delay and cannot be optimized by the compiler
> + * assuming one read takes 200 cycles and A8 is runing 1 GHz
> + * somewhat conservative setting
> + */
> + for (i = 0; i < 50*d; i++)
> + readl(CONTROL_STATUS);
> +}
>
these seem more SOC specific than board specific. Would likely be
replicated per board, I'd suggest to move out of board specific file.
> +
> +#ifdef CONFIG_TI816X_EVM_DDR3
> +/*
> + * Init DDR3 on TI816X EVM
> + */
> +static void ddr_init_settings(int emif)
>
this function is generic to the SOC, move out of board specific file and
call with appropriate values or defines
> +{
> + /*
> + * DLL Lockdiff DLL_Lockdiff determines effectively is the
> + * threshold internal to the DLL to indicate that the DLL has
> + * lost lock. When this happens the PHY currently issues an
> + * internal reset. The reset value for this is 0x4, which is
> + * insufficient. Set this to 15 (maximum possible - to
> + * prevent this reset. If the reset happens it would cause
> + * the data to be corrupted.
> + */
> + if (0 == get_cpu_rev()) {
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x028);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x05C);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x090);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x138);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x1DC);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x280);
> + writel(0xF, DDRPHY_CONFIG_BASE + 0x324);
> + }
> +
> + /*
> + * setup use_rank_delays to 1. This is only necessary when
> + * multiple ranks are in use. Though the EVM does not have
> + * multiple ranks, this is a good value to set.
> + */
> + writel(1, DDRPHY_CONFIG_BASE + 0x134);
> + writel(1, DDRPHY_CONFIG_BASE + 0x1d8);
> + writel(1, DDRPHY_CONFIG_BASE + 0x27c);
> + writel(1, DDRPHY_CONFIG_BASE + 0x320);
> +
> + /* see ddr_defs.h for invert clock setting and details */
> + /* invert_clk_out cmd0 */
> + writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x02C);
> + /* invert_clk_out cmd0 */
> + writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x060);
> + /* invert_clk_out cmd0 */
> + writel(INVERT_CLOCK, DDRPHY_CONFIG_BASE + 0x094);
> +
> + /* with inv clkout: 0x100. no inv clkout: 0x80. See ddr_defs.h */
> + /* cmd0 slave ratio */
> + writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x01C);
> + /* cmd1 slave ratio */
> + writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x050);
> + /* cmd2 slave ratio */
> + writel(CMD_SLAVE_RATIO, DDRPHY_CONFIG_BASE + 0x084);
> +
> + /* for ddr3 this needs to be set to 1 */
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x104);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x19C);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x240);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x24C);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4);
> + writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0);
> +
> + /**** setup the initial levelinihg ratios ****/
>
typo
> + /*
> + * These are derived from board delays and may be different for
> + * different boards see ddr_defs.h
> + * We are setting the values here for both the ranks, though only
> + * one is in use
> + */
> +
> + /* data0 writelvl init ratio */
> + writel((WR_DQS_RATIO_3 << 10) | WR_DQS_RATIO_3,
> + DDRPHY_CONFIG_BASE + 0x0F0);
> + writel(0x00000, DDRPHY_CONFIG_BASE + 0x0F4);
> + /* data1 writelvl init ratio */
> + writel((WR_DQS_RATIO_2 << 10) | WR_DQS_RATIO_2,
> + DDRPHY_CONFIG_BASE + 0x194);
> + writel(0x00000, DDRPHY_CONFIG_BASE + 0x198);
> + /* data2 writelvl init ratio */
> + writel((WR_DQS_RATIO_1 << 10) | WR_DQS_RATIO_1,
> + DDRPHY_CONFIG_BASE + 0x238);
> + writel(0x00000, DDRPHY_CONFIG_BASE + 0x23c);
> + /* data3 writelvl init ratio */
> + writel((WR_DQS_RATIO_0 << 10) | WR_DQS_RATIO_0,
> + DDRPHY_CONFIG_BASE + 0x2dc);
> + writel(0x00000, DDRPHY_CONFIG_BASE + 0x2e0);
> +
> +
> + /* data0 gatelvl init ratio */
> + writel((RD_GATE_RATIO_3 << 10) | RD_GATE_RATIO_3,
> + DDRPHY_CONFIG_BASE + 0x0FC);
> + writel(0x0, DDRPHY_CONFIG_BASE + 0x100);
> + /* data1 gatelvl init ratio */
> + writel((RD_GATE_RATIO_2 << 10) | RD_GATE_RATIO_2,
> + DDRPHY_CONFIG_BASE + 0x1A0);
> + writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4);
> + /* data2 gatelvl init ratio */
> + writel((RD_GATE_RATIO_1 << 10) | RD_GATE_RATIO_1,
> + DDRPHY_CONFIG_BASE + 0x244);
> + writel(0x0, DDRPHY_CONFIG_BASE + 0x248);
> + /* data3 gatelvl init ratio */
> + writel((RD_GATE_RATIO_0 << 10) | RD_GATE_RATIO_0,
> + DDRPHY_CONFIG_BASE + 0x2E8);
> + writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC);
> +
> + /* cmd0 io config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x00C);
> + /* cmd0 io clk config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x010);
> + /* cmd1 io config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x040);
> + /* cmd1 io clk config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x044);
> + /* cmd2 io config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x074);
> + /* cmd2 io clk config - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x078);
> + /* data0 io config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8);
> + /* data0 io clk config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC);
> + /* data1 io config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x14C);
> + /* data1 io clk config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x150);
> + /* data2 io config - output impedance of pa */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0);
> + /* data2 io clk config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4);
> + /* data3 io config - output impedance of pa */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x294);
> + /* data3 io clk config - output impedance of pad */
> + writel(0x4, DDRPHY_CONFIG_BASE + 0x298);
> +
> + if (get_cpu_rev() == 0) {
> + /* fifo_we_out0 - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x338);
> + /* fifo_we_out1 - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x340);
> + /* fifo_we_in2 - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x348);
> + /* fifo_we_in3 - output impedance of pad */
> + writel(0x5, DDRPHY_CONFIG_BASE + 0x350);
> + }
> +}
> +
> +static void emif4p_init(u32 TIM1, u32 TIM2, u32 TIM3, u32 SDREF, u32
> SDCFG,
> + u32 RL)
>
again function generic to SOC, move out of board file, applies for a lot of
what follows, but I'll stop repeating it :-)
> +{
> + if (USE_EMIF0) {
> + /* Program EMIF0 CFG Registers */
> + writel(TIM1, EMIF4_0_SDRAM_TIM_1);
> + writel(TIM1, EMIF4_0_SDRAM_TIM_1_SHADOW);
> + writel(TIM2, EMIF4_0_SDRAM_TIM_2);
> + writel(TIM2, EMIF4_0_SDRAM_TIM_2_SHADOW);
> + writel(TIM3, EMIF4_0_SDRAM_TIM_3);
> + writel(TIM3, EMIF4_0_SDRAM_TIM_3_SHADOW);
> + writel(SDCFG, EMIF4_0_SDRAM_CONFIG);
> + writel(RL, EMIF4_0_DDR_PHY_CTRL_1);
> + writel(RL, EMIF4_0_DDR_PHY_CTRL_1_SHADOW);
> + /* initially a large refresh period */
> + writel(0x0000613B, EMIF4_0_SDRAM_REF_CTRL);
> + /* trigger initialization */
> + writel(0x1000613B, EMIF4_0_SDRAM_REF_CTRL);
> + writel((0x10000000|EMIF_SDREF), EMIF4_0_SDRAM_REF_CTRL);
> + }
> +
> + if (USE_EMIF1) {
> + /* Program EMIF1 CFG Registers */
> + writel(TIM1, EMIF4_1_SDRAM_TIM_1);
> + writel(TIM1, EMIF4_1_SDRAM_TIM_1_SHADOW);
> + writel(TIM2, EMIF4_1_SDRAM_TIM_2);
> + writel(TIM2, EMIF4_1_SDRAM_TIM_2_SHADOW);
> + writel(TIM3, EMIF4_1_SDRAM_TIM_3);
> + writel(TIM3, EMIF4_1_SDRAM_TIM_3_SHADOW);
> + writel(SDCFG, EMIF4_1_SDRAM_CONFIG);
> + writel(RL, EMIF4_1_DDR_PHY_CTRL_1);
> + writel(RL, EMIF4_1_DDR_PHY_CTRL_1_SHADOW);
> + /* initially a large refresh period */
> + writel(0x0000613B, EMIF4_1_SDRAM_REF_CTRL);
> + /* trigger initialization */
> + writel(0x1000613B, EMIF4_1_SDRAM_REF_CTRL);
> + writel((0x10000000|EMIF_SDREF), EMIF4_1_SDRAM_REF_CTRL);
> + }
> +
> + delay(1000);
> +#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
> + ddr3_sw_levelling(0);
> + ddr3_sw_levelling(1);
>
call levelling code on both interfaces if only one EMIF is being used?
make conditional on USE_EMIF1
> +#endif
> +}
> +
> +/* needed by config_dmm() */
> +void enable_dmm_clocks(void) {};
> +
> +static void config_ti816x_sdram_ddr(void)
>
again SOC specific code to move out of board file
> +{
> + /* Enable the EMIF Firewall clocks */
> + writel(0x2, CM_DEFAULT_FW_CLKCTRL);
> + /* Enable the Power Domain Transition of L3 Fast Domain Peripheral
> */
> + writel(0x2, CM_DEFAULT_L3_FAST_CLKSTCTRL);
> + /* Enable EMIF0 Clock */
> + writel(0x2, CM_DEFAULT_EMIF_0_CLKCTRL);
> + /* Enable EMIF1 Clock */
> + writel(0x2, CM_DEFAULT_EMIF_1_CLKCTRL);
> + /* Poll for L3_FAST_GCLK & DDR_GCLK are active */
> + while ((readl(CM_DEFAULT_L3_FAST_CLKSTCTRL) & 0x300) != 0x300)
> + ;
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_EMIF_0_CLKCTRL)) != 0x2)
> + ;
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_EMIF_1_CLKCTRL)) != 0x2)
> + ;
> +
> + if (USE_EMIF0)
> + ddr_init_settings(0);
> +
> + if (USE_EMIF1)
> + ddr_init_settings(1);
> +
> + /* Enable EMIF1 Clock */
> + writel(0x2, CM_DEFAULT_DMM_CLKCTRL);
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_DMM_CLKCTRL)) != 0x2)
> + ;
> +
> + /* Program the DMM to for interleaved configuration */
> + config_dmm(&evm_lisa_map_regs);
> +
> + /* Enable Tiled Access */
> + writel(0x80000000, DMM_PAT_BASE_ADDR);
> +
> + emif4p_init(EMIF_TIM1, EMIF_TIM2, EMIF_TIM3, EMIF_SDREF &
> 0xFFFFFFF,
> + EMIF_SDCFG, EMIF_PHYCFG);
> +}
> +
> +#ifdef CONFIG_TI816X_DDR3_SW_LEVELING
> +static void ddr3_sw_levelling(int emif)
> +{
> + writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
> +
> + writel(DQS_GATE_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x108));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x10C));
> + writel(DQS_GATE_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1AC));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x1B0));
> + writel(DQS_GATE_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x250));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x254));
> + writel(DQS_GATE_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2F4));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x2F8));
> +
> + writel(WR_DQS_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x0DC));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x0E0));
> + writel(WR_DQS_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x180));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x184));
> + writel(WR_DQS_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x224));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x228));
> + writel(WR_DQS_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2C8));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x2CC));
> +
> + writel(WR_DATA_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x120));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x124));
> + writel(WR_DATA_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1C4));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x1C8));
> + writel(WR_DATA_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x268));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x26C));
> + writel(WR_DATA_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x30C));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x310));
> +
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x0C8));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x0CC));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x16C));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x170));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x210));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x214));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x2B4));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x2B8));
> +}
> +#endif /* CONFIG_TI816X_DDR3_SW_LEVELING */
> +
> +#endif /* CONFIG_TI816X_EVM_DDR3 */
> +
> +#ifdef CONFIG_TI816X_EVM_DDR2
> +static void ddr_init_settings(int emif)
> +{
> + /* DLL Lockdiff */
> + if (get_cpu_rev() == 0) {
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x028));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x05C));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x090));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x138));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x1DC));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x280));
> + writel(0xF, (DDRPHY_CONFIG_BASE + 0x324));
> + }
> +
> + if (get_cpu_rev() == 1)
> + writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
> +
> + /* setup rank delays */
> + writel(0x1, (DDRPHY_CONFIG_BASE + 0x134));
> + writel(0x1, (DDRPHY_CONFIG_BASE + 0x1D8));
> + writel(0x1, (DDRPHY_CONFIG_BASE + 0x27C));
> + writel(0x1, (DDRPHY_CONFIG_BASE + 0x320));
> +
> + /* invert_clk_out cmd0 */
> + writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x02C));
> + writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x060));
> + writel(INVERT_CLK_OUT, (DDRPHY_CONFIG_BASE + 0x094));
> +
> + /* cmd0 slave ratio */
> + writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x01C));
> + writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x050));
> + writel(CMD_SLAVE_RATIO, (DDRPHY_CONFIG_BASE + 0x084));
> +
> + writel(DQS_GATE_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x108));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x10C));
> + writel(DQS_GATE_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1AC));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x1B0));
> + writel(DQS_GATE_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x250));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x254));
> + writel(DQS_GATE_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2F4));
> + writel(0x00000000, (DDRPHY_CONFIG_BASE + 0x2F8));
> +
> + writel(WR_DQS_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x0DC));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x0E0));
> + writel(WR_DQS_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x180));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x184));
> + writel(WR_DQS_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x224));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x228));
> + writel(WR_DQS_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x2C8));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x2CC));
> +
> + writel(WR_DATA_RATIO_BYTE_LANE0, (DDRPHY_CONFIG_BASE + 0x120));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x124));
> + writel(WR_DATA_RATIO_BYTE_LANE1, (DDRPHY_CONFIG_BASE + 0x1C4));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x1C8));
> + writel(WR_DATA_RATIO_BYTE_LANE2, (DDRPHY_CONFIG_BASE + 0x268));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x26C));
> + writel(WR_DATA_RATIO_BYTE_LANE3, (DDRPHY_CONFIG_BASE + 0x30C));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x310));
> +
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x0C8));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x0CC));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x16C));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x170));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x210));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x214));
> + writel(RD_DQS_RATIO, (DDRPHY_CONFIG_BASE + 0x2B4));
> + writel(0x0, (DDRPHY_CONFIG_BASE + 0x2B8));
> +
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x00C));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x010));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x040));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x044));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x074));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x078));
> +
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x0A8));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x0AC));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x14C));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x150));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x1F0));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x1F4));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x294));
> + writel(0x4, (DDRPHY_CONFIG_BASE + 0x298));
> +
> + if (get_cpu_rev() == 0) {
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x338));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x340));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x348));
> + writel(0x5, (DDRPHY_CONFIG_BASE + 0x350));
> + }
> +
> +}
> +
> +static void emif4p_init(u32 TIM1, u32 TIM2, u32 TIM3, u32 SDREF, u32
> SDCFG,
> + u32 RL)
> +{
> + /* Program EMIF0 CFG Registers */
> + writel(TIM1, EMIF4_0_SDRAM_TIM_1);
> + writel(TIM1, EMIF4_0_SDRAM_TIM_1_SHADOW);
> + writel(TIM2, EMIF4_0_SDRAM_TIM_2);
> + writel(TIM2, EMIF4_0_SDRAM_TIM_2_SHADOW);
> + writel(TIM3, EMIF4_0_SDRAM_TIM_3);
> + writel(TIM3, EMIF4_0_SDRAM_TIM_3_SHADOW);
> + writel(SDCFG, EMIF4_0_SDRAM_CONFIG);
> + writel(RL, EMIF4_0_DDR_PHY_CTRL_1);
> + writel(RL, EMIF4_0_DDR_PHY_CTRL_1_SHADOW);
> +
> + if (CONFIG_TI816X_TWO_EMIF) {
> + writel(TIM1, EMIF4_1_SDRAM_TIM_1);
> + writel(TIM1, EMIF4_1_SDRAM_TIM_1_SHADOW);
> + writel(TIM2, EMIF4_1_SDRAM_TIM_2);
> + writel(TIM2, EMIF4_1_SDRAM_TIM_2_SHADOW);
> + writel(TIM3, EMIF4_1_SDRAM_TIM_3);
> + writel(TIM3, EMIF4_1_SDRAM_TIM_3_SHADOW);
> + writel(SDCFG, EMIF4_1_SDRAM_CONFIG);
> + writel(RL, EMIF4_1_DDR_PHY_CTRL_1);
> + writel(RL, EMIF4_1_DDR_PHY_CTRL_1_SHADOW);
> + }
> +
> + /* setup a small control period */
> + writel(0x0000613B, EMIF4_0_SDRAM_REF_CTRL);
> + writel(0x1000613B, EMIF4_0_SDRAM_REF_CTRL);
> + writel((0x10000000|SDREF), EMIF4_0_SDRAM_REF_CTRL);
> +
> + if (CONFIG_TI816X_TWO_EMIF) {
> + /* setup a small control period */
> + writel(0x0000613B, EMIF4_1_SDRAM_REF_CTRL);
> + writel(0x1000613B, EMIF4_1_SDRAM_REF_CTRL);
> + writel((0x10000000|SDREF), EMIF4_1_SDRAM_REF_CTRL);
> +
> + }
> +
> +
> +}
> +
> +/* needed by config_dmm() */
> +void enable_dmm_clocks(void) {};
> +
> +static void config_ti816x_sdram_ddr(void)
> +{
> + /* Enable the Power Domain Transition of L3 Fast Domain Peripheral
> */
> + writel(0x2, CM_DEFAULT_L3_FAST_CLKSTCTRL);
> + /* Enable EMIF0 Clock */
> + writel(0x2, CM_DEFAULT_EMIF_0_CLKCTRL);
> + /* Enable EMIF1 Clock */
> + writel(0x2, CM_DEFAULT_EMIF_1_CLKCTRL);
> + /* Poll for L3_FAST_GCLK & DDR_GCLK are active */
> + while ((readl(CM_DEFAULT_L3_FAST_CLKSTCTRL) & 0x300) != 0x300)
> + ;
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_EMIF_0_CLKCTRL)) != 0x2)
> + ;
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_EMIF_1_CLKCTRL)) != 0x2)
> + ;
> +
> + ddr_init_settings(0);
> +
> + if (CONFIG_TI816X_TWO_EMIF)
> + ddr_init_settings(1);
> +
> + /* Enable EMIF1 Clock */
> + writel(0x2, CM_DEFAULT_DMM_CLKCTRL);
> + /* Poll for Module is functional */
> + while ((readl(CM_DEFAULT_DMM_CLKCTRL)) != 0x2)
> + ;
> +
> + /* Program the DMM for interleave setting */
> + config_dmm(&evm_lisa_map_regs);
> +
> + /* Enable Tiled Access */
> + writel(0x80000000, DMM_PAT_BASE_ADDR);
> +
> + emif4p_init(EMIF_TIM1, EMIF_TIM2, EMIF_TIM3, EMIF_SDREF &
> 0xFFFFFFF,
> + EMIF_SDCFG, EMIF_PHYCFG);
> +
> +}
> +#endif
> +
> +/*
> + * TI816X specific functions
> + */
> +static void main_pll_init_ti816x(u32 sil_index, u32 clk_index)
> +{
> + u32 main_pll_ctrl = 0;
> +
> + /*
> + * Sequence to be followed:
> + * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
> + * 2. Write the values of N,P in the CTRL reg
> + * 3. Program the freq values, divider values for the required
> output
> + * in the Control module reg
> + * 4. Note: Loading the freq value requires a particular bit to be
> set
> + * in the freq reg.
> + * 4. Program the CM divider value in the CM module reg
> + * 5. Enable the PLL by setting the appropriate bit in the CTRL
> reg of
> + * the PLL
> + */
> +
> + /* If the registers have been set by the ROM code dont do anything
> */
> +
> + main_pll_ctrl = readl(MAINPLL_CTRL);
> + main_pll_ctrl &= 0xFFFFFFFB;
> + main_pll_ctrl |= 4;
> + writel(main_pll_ctrl, MAINPLL_CTRL);
> +
> + main_pll_ctrl = readl(MAINPLL_CTRL);
> + main_pll_ctrl &= 0xFFFFFFF7;
> + main_pll_ctrl |= 8;
> + writel(main_pll_ctrl, MAINPLL_CTRL);
> +
> + main_pll_ctrl = readl(MAINPLL_CTRL);
> + main_pll_ctrl &= 0xFF;
> + main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8);
> + writel(main_pll_ctrl, MAINPLL_CTRL);
> +
> + writel(0x0, MAINPLL_PWD);
> +
> + writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1),
> + MAINPLL_FREQ1);
> + writel(((1<<8) | MAIN_MDIV1), MAINPLL_DIV1);
> +
> + writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2),
> + MAINPLL_FREQ2);
> + writel(((1<<8) | MAIN_MDIV2), MAINPLL_DIV2);
> +
> + writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3),
> + MAINPLL_FREQ3);
> + writel(((1<<8) | MAIN_MDIV3), MAINPLL_DIV3);
> +
> + writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4),
> + MAINPLL_FREQ4);
> + writel(((1<<8) | MAIN_MDIV4), MAINPLL_DIV4);
> +
> + writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5),
> + MAINPLL_FREQ5);
> + writel(((1<<8) | MAIN_MDIV5), MAINPLL_DIV5);
> +
> + writel((1<<8 | MAIN_MDIV6), MAINPLL_DIV6);
> +
> + writel((1<<8 | MAIN_MDIV7), MAINPLL_DIV7);
> +
> + while ((readl(MAINPLL_CTRL) & 0x80) != 0x80)
> + ;
> +
> + main_pll_ctrl = readl(MAINPLL_CTRL);
> + main_pll_ctrl &= 0xFFFFFFFB;
> +
> + writel(main_pll_ctrl, MAINPLL_CTRL);
> +
> +}
> +
> +static void ddr_pll_init_ti816x(u32 sil_index, u32 clk_index)
> +{
> + u32 ddr_pll_ctrl = 0;
> +
> + /*
> + * Sequence to be followed:
> + * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
> + * 2. Write the values of N,P in the CTRL reg
> + * 3. Program the freq values, divider values for the required
> output
> + * in the Control module reg
> + * 4. Note: Loading the freq value requires a particular bit to be
> set
> + * in the freq reg.
> + * 5. Program the CM divider value in the CM module reg
> + * 6. Enable the PLL by setting the appropriate bit in the CTRL
> reg of
> + * the PLL
> + */
> +
> + /* If the registers have been set by the ROM code dont do anything
> */
> +
> + ddr_pll_ctrl = readl(DDRPLL_CTRL);
> + ddr_pll_ctrl &= 0xFFFFFFFB;
> + writel(ddr_pll_ctrl, DDRPLL_CTRL);
> +
> + ddr_pll_ctrl = readl(DDRPLL_CTRL);
> + ddr_pll_ctrl &= 0xFFFFFFF7;
> + ddr_pll_ctrl |= 8;
> + writel(ddr_pll_ctrl, DDRPLL_CTRL);
> +
> + ddr_pll_ctrl = readl(DDRPLL_CTRL);
> + ddr_pll_ctrl &= 0xFF;
> + ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8);
> + writel(ddr_pll_ctrl, DDRPLL_CTRL);
> +
> + /* 10usec delay */
> + ddr_delay(10);
> +
> + writel(0x0, DDRPLL_PWD);
> +
> + writel(((0<<8) | DDR_MDIV1), DDRPLL_DIV1);
> + ddr_delay(1);
> + writel(((1<<8) | DDR_MDIV1), DDRPLL_DIV1);
> +
> + writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2),
> + DDRPLL_FREQ2);
> + writel(((1<<8) | DDR_MDIV2), DDRPLL_DIV2);
> +
> + writel(((0<<8) | DDR_MDIV3), DDRPLL_DIV3);
> + ddr_delay(1);
> + writel(((1<<8) | DDR_MDIV3), DDRPLL_DIV3);
> + ddr_delay(1);
> + writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
> + DDRPLL_FREQ3);
> + ddr_delay(1);
> + writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
> + DDRPLL_FREQ3);
> +
> + ddr_delay(5);
> +
> + /* Wait for PLL to lock */
> + while ((readl(DDRPLL_CTRL) & 0x80) != 0x80)
> + ;
> +
> + ddr_pll_ctrl = readl(DDRPLL_CTRL);
> + ddr_pll_ctrl &= 0xFFFFFFFB;
> + ddr_pll_ctrl |= 4;
> + writel(ddr_pll_ctrl, DDRPLL_CTRL);
> +
> + writel(0x1, DDR_RCD);
> +
> +}
> +
> +/*****************************************************************
> + * Routine: peripheral_enable
> + * Description: Enable the clks & power for perifs (TIMER1, UART0,...)
> + *
> + ******************************************************************/
> +static void peripheral_enable(void)
> +{
> + /* DMTimers */
> + writel(0x2, CM_ALWON_L3_SLOW_CLKSTCTRL);
> +
> + /*
> + * Note on Timers:
> + * There are 8 timers(0-7) out of which timer 0 is a secure timer.
> + * Timer 0 mux should not be changed
> + * For other timers, there are 3 inputs TCLKIN, 32KHz (external clk
> + * or SYSCLK18?) and CLKIN(27MHz)
> + * We select CLKIN and use that
> + */
> +
> + /*
> + * First we need to enable the modules and setup the clk path
> + * Then the timers need to be configured by writing to their
> registers
> + * To access the timer registers we need the module to be
> + * enabled which is what we do in the first step
> + */
> +
> + /* TIMER 1 */
> + writel(0x2, CM_ALWON_TIMER_1_CLKCTRL);
> +
> + /* Selects CLKIN (27MHz) */
> + writel(0x2, CM_TIMER1_CLKSEL);
> +
> + while (((readl(CM_ALWON_L3_SLOW_CLKSTCTRL)
> + & (0x80000<<1)) >> (19+1)) != 1)
> + ;
> +
> + while (((readl(CM_ALWON_TIMER_1_CLKCTRL) & 0x30000)>>16) != 0)
> + ;
> +
> +
> + writel(0x2, (DM_TIMER1_BASE + 0x54));
> + while (readl(DM_TIMER1_BASE + 0x10) & 1)
> + ;
> +
> + writel(0x1, (DM_TIMER1_BASE + 0x38));
> +
> + /* UARTs */
> + /* Note: The clock has been set to correct rate before this step */
> + writel(0x2, CM_ALWON_UART_0_CLKCTRL);
> + while (readl(CM_ALWON_UART_0_CLKCTRL) != 0x2)
> + ;
> +
> + writel(0x2, CM_ALWON_UART_1_CLKCTRL);
> + while (readl(CM_ALWON_UART_1_CLKCTRL) != 0x2)
> + ;
> +
> + writel(0x2, CM_ALWON_UART_2_CLKCTRL);
> + while (readl(CM_ALWON_UART_2_CLKCTRL) != 0x2)
> + ;
> +
> + while ((readl(CM_ALWON_L3_SLOW_CLKSTCTRL) & 0x2100) != 0x2100)
> + ;
> +
> + /* eFuse */
> + writel(0x2, CM_ALWON_CUST_EFUSE_CLKCTRL);
> + while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != 0x2)
> + ;
> +
> + /* GPIO0 */
> + writel(0x2, CM_ALWON_GPIO_0_CLKCTRL);
> + while (readl(CM_ALWON_GPIO_0_CLKCTRL) != 0x2)
> + ;
> +
> + writel((BIT(8)), CM_ALWON_GPIO_0_OPTFCLKEN_DBCLK);
> +
> + /* SPI */
> + writel(0x2, CM_ALWON_SPI_CLKCTRL);
> + while (readl(CM_ALWON_SPI_CLKCTRL) != 0x2)
> + ;
> +
> + /* I2C0 */
> + writel(0x2, CM_ALWON_I2C_0_CLKCTRL);
> + while (readl(CM_ALWON_I2C_0_CLKCTRL) != 0x2)
> + ;
> +
> + /* Ethernet */
> + writel(0x2, CM_ETHERNET_CLKSTCTRL);
> + writel(0x2, CM_ALWON_ETHERNET_0_CLKCTRL);
> + writel(0x2, CM_ALWON_ETHERNET_1_CLKCTRL);
> +
> + /* HSMMC */
> + writel(0x2, CM_ALWON_HSMMC_CLKCTRL);
> + while (readl(CM_ALWON_HSMMC_CLKCTRL) != 0x2)
> + ;
> +
> + /* WDT */
> + /*
> + * For WDT to be functional, it needs to be first stopped by
> writing
> + * the pattern 0xAAAA followed by 0x5555 in the WDT start/stop
> register.
> + * After that a write-once register in Control module needs to
> + * be configured
> + * to unfreeze the timer.
> + * Note: It is important to stop the watchdog before unfreezing it
> + */
> + writel(0xAAAA, WDT_WSPR);
> + while (readl(WDT_WWPS) != 0x0)
> + ;
> + writel(0x5555, WDT_WSPR);
> + while (readl(WDT_WWPS) != 0x0)
> + ;
> +
> + /* Unfreeze WDT */
> + writel(0x2, WDT_UNFREEZE);
> +}
> +
>
> +/******************************************************************************
> + * prcm_init() - inits clocks for PRCM as defined in clocks.h
> +
> *****************************************************************************/
> +void prcm_init(void)
> +{
> + /* For future */
> + u32 clk_index = 0, sil_index = 0;
> +
> + writel(0x2, 0x48200010);
>
define a register name please
> + /* Enable the control module */
> + writel(0x2, CM_ALWON_CONTROL_CLKCTRL);
> +
> + /* Fix ROM code bug */
> + writel(0x0, 0x48180324);
>
what bug? define a register name
> +
> + main_pll_init_ti816x(clk_index, sil_index);
> + ddr_pll_init_ti816x(clk_index, sil_index);
> +
> + /*
> + * With clk freqs setup to desired values,
> + * enable the required peripherals
> + */
> + peripheral_enable();
> +}
> +#endif /* CONFIG_SPL_BUILD */
> +
> +/**********************************************************
> + * Routine: s_init
> + * Description: Does early system init of muxing and clocks.
> + * - Called at time when only stack is available.
> + **********************************************************/
> +void s_init(void)
> +{
> +#ifdef CONFIG_SPL_BUILD
> + /* Setup the PLLs and the clocks for the peripherals */
> + prcm_init();
> + configure_module_pin_mux(mmc_pin_mux);
> +
> + gd = &gdata;
> +
> + preloader_console_init();
> +
> + config_ti816x_sdram_ddr(); /* Do DDR settings */
> +#endif
> +}
> +
> +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
> +int board_mmc_init(bd_t *bis)
> +{
> + omap_mmc_init(0, 0, 0);
> + return 0;
> +}
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index c98495a..aab56b9 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -239,6 +239,7 @@ am335x_evm_uart3 arm armv7
> am335x ti
> am335x_evm_uart4 arm armv7 am335x
> ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
> am335x_evm_uart5 arm armv7 am335x
> ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
> ti814x_evm arm armv7 ti814x
> ti am33xx
> +ti816x_evm arm armv7 ti816x
> ti am33xx
> pcm051 arm armv7 pcm051
> phytec am33xx pcm051
> highbank arm armv7 highbank
> - highbank
> mx51_efikamx arm armv7 mx51_efikamx
> genesi mx5
> mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
> diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
> new file mode 100644
> index 0000000..8d10b1c
> --- /dev/null
> +++ b/include/configs/ti816x_evm.h
> @@ -0,0 +1,177 @@
> +/*
> + * ti816x_evm.h
> + *
> + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
> + * Antoine Tenart, <atenart at adeneo-embedded.com>
> + *
> + * This file is released under the terms of GPL v2 and any later version.
> + * See the file COPYING in the root directory of the source tree for
> details.
> + */
> +
> +#ifndef __CONFIG_TI816X_EVM_H
> +#define __CONFIG_TI816X_EVM_H
> +
> +#define CONFIG_TI81XX
> +#define CONFIG_TI816X
> +#define CONFIG_SYS_NO_FLASH
> +
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/hardware.h>
> +
> +#define CONFIG_ENV_SIZE 0x2000
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024))
> +#define CONFIG_SYS_LONGHELP /* undef save memory */
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT "u-boot/ti816x# "
> +#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
>
+
> +#define CONFIG_OF_LIBFDT
> +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG /* required for ramdisk support */
> +
> +#include <config_cmd_default.h> /* u-boot default commands
> */
> +
> +#define CONFIG_VERSION_VARIABLE
> +#define CONFIG_DISPLAY_CPUINFO
> +
> +#define CONFIG_BOOTDELAY 3 /* set negative for no autoboot
> */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "verify=yes\0"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc rescan 0;" \
> + "fatload mmc 0 0x81000000 uImage;" \
> + "bootm 0x81000000"
> +
> +#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd
> earlyprintk"
> +
> +/* Clock Defines */
> +#define V_OSCK 24000000 /* Clock output from T2 */
> +#define V_SCLK (V_OSCK >> 1)
> +
> +#define CONFIG_SYS_MAXARGS 32
> +#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
> + + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size
> */
> +
> +/*
> + * Memtest works on 8 MB in DRAM after skipping 32MB
> + * from start addr of ram disk
> + */
> +#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64*1024*1024))
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
> + + (8*1024*1024))
> +
> +#undef CONFIG_SYS_CLKS_IN_HZ
> +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address
> */
> +#define CONFIG_SYS_HZ 1000 /* 1ms clock */
> +
> +#define CONFIG_CMD_ASKEN
> +#define CONFIG_CMD_ECHO
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_OMAP_HSMMC
> +#define CONFIG_CMD_MMC
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_EXT2
> +
> +#define CONFIG_FS_FAT
> +
> +/* Only one of the following two options (DDR3/DDR2) should be enabled */
> +/*
> +#define CONFIG_TI816X_EVM_DDR2
> +#define CONFIG_TI816X_TWO_EMIF 1
> +*/
> +#define CONFIG_TI816X_EVM_DDR3
> +
> +
> +#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM
> */
> +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
> +#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */
> +#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */
> +#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */
> +
> +#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
> +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
> + GENERATED_GBL_DATA_SIZE)
> +
> +/**
> + * Platform/Board specific defs
> + */
> +#define CONFIG_SYS_CLK_FREQ 27000000
> +#define CONFIG_SYS_TIMERBASE 0x4802E000
> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> +
> +#undef CONFIG_NAND_OMAP_GPMC
> +
> +/*
> + * NS16550 Configuration
> + */
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> +#define CONFIG_SYS_NS16550_CLK (48000000)
> +#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +/* allow overwriting serial config and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +
> +#define CONFIG_SERIAL1
> +#define CONFIG_SERIAL2
> +#define CONFIG_SERIAL3
> +#define CONFIG_CONS_INDEX 1
> +#define CONFIG_SYS_CONSOLE_INFO_QUIET
> +
> +#define CONFIG_ENV_IS_NOWHERE
> +
> +/* SPL */
> +/* Defines for SPL */
> +#define CONFIG_SPL
> +#define CONFIG_SPL_FRAMEWORK
> +#define CONFIG_SPL_TEXT_BASE 0x40300000
> +#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
> +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> +
> +#define CONFIG_SPL_BSS_START_ADDR 0x80000000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> +
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000
> */
> +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
> +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
> +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
> +#define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_FAT_SUPPORT
> +
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBDISK_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_SERIAL_SUPPORT
> +#define CONFIG_SPL_GPIO_SUPPORT
> +#define CONFIG_SPL_YMODEM_SUPPORT
> +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
> +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
> +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
> +
> +#define CONFIG_SPL_BOARD_INIT
> +
> +#define CONFIG_SYS_TEXT_BASE 0x80800000
> +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
> +
> +/* Since SPL did pll and ddr initialization for us,
> + * we don't need to do it twice.
> + */
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#endif
> +
> +/* Unsupported features */
> +#undef CONFIG_USE_IRQ
> +
> +#endif
> --
> 1.7.10.4
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list