[U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL

[Benoît Thébaudeau]

Hi Fabio,

On Tuesday, April 9, 2013 8:07:31 PM, Fabio Estevam wrote:
> On Tue, Apr 9, 2013 at 2:37 PM, Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
> 
> > Especially, does it work with only:
> > -#define CONFIG_HW_WATCHDOG
> > -#define CONFIG_IMX_WATCHDOG
> > -#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x32000
> > +#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x3f800
> 
> No, it hangs in "Net :". Also tried 0x40000 and the same hang happens.

OK.

> Maybe we should use the proposed values you proposed earlier?

These values were very wide, just for testing. It'd be better to adjust them. So
can you just try the following, and I'll stop asking for more tests:
-#define CONFIG_SPL_TEXT_BASE	0x87ec0000
-#define CONFIG_SYS_TEXT_BASE	0x87f00000
+#define CONFIG_SPL_TEXT_BASE	0x87dc0000
+#define CONFIG_SYS_TEXT_BASE	0x87e00000
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x32000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x3f800
?

> I can handle the watchdog patch separately.

OK.

Best regards,
Benoît