[U-Boot] [PATCH] pcm051: Enable DDR PHY dynamic power down bit

[Lars Poeschel]

From: Lars Poeschel <poeschel at lemonage.de>

This is done already for am335x in
59dcf970d11ebff5d9f4bbbde79fda584e9e7ad4 and also applies for pcm051.

It powers down the IO receiver when not performing read which helps
reducing the overall power consuption in low power states
(suspend/standby).

Signed-off-by: Lars Poeschel <poeschel at lemonage.de>
---
 board/phytec/pcm051/board.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 1708ac2..43d7b6e 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -104,7 +104,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2,
 	.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3,
 	.zq_config = MT41J256M8HX15E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif
 
-- 
1.7.10.4