[U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset

[Otavio Salvador]

The MX23 Boot ROM does blindly load from 2048 offset while the MX28
does parse the BCB header to known where to load the image from. We
move the BCB header to 4 sectors offset so same code can be used by
both SoCs avoiding code duplication.

This idea was given by Marek Vasut <marex at denx.de>

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
 tools/mxsboot.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/mxsboot.c b/tools/mxsboot.c
index 6c05aa4..d92c39f 100644
--- a/tools/mxsboot.c
+++ b/tools/mxsboot.c
@@ -551,7 +551,7 @@ static int mx28_create_sd_image(int infd, int outfd)
 
 	fsize = lseek(infd, 0, SEEK_END);
 	lseek(infd, 0, SEEK_SET);
-	size = fsize + 512;
+	size = fsize + 4 * 512;
 
 	buf = malloc(size);
 	if (!buf) {
@@ -559,7 +559,7 @@ static int mx28_create_sd_image(int infd, int outfd)
 		goto err0;
 	}
 
-	ret = read(infd, (uint8_t *)buf + 512, fsize);
+	ret = read(infd, (uint8_t *)buf + 4 * 512, fsize);
 	if (ret != fsize) {
 		ret = -1;
 		goto err1;
@@ -574,8 +574,8 @@ static int mx28_create_sd_image(int infd, int outfd)
 	cb->drv_info[0].chip_num = 0x0;
 	cb->drv_info[0].drive_type = 0x0;
 	cb->drv_info[0].tag = 0x1;
-	cb->drv_info[0].first_sector_number = sd_sector + 1;
-	cb->drv_info[0].sector_count = (size - 1) / 512;
+	cb->drv_info[0].first_sector_number = sd_sector + 4;
+	cb->drv_info[0].sector_count = (size - 4) / 512;
 
 	wr_size = write(outfd, buf, size);
 	if (wr_size != size) {
-- 
1.8.1