[U-Boot] [PATCH v2 0/15] Xilinx Zynq patches

[Tom Rini]

On Tue, Apr 23, 2013 at 12:45:59PM +0200, Michal Simek wrote:

> Patchset contains several patches which improve Xilinx Zynq arm port.
> Patchset contain:
> - core changes
> - gem updates
> - mmc support
> - i2c support
> - pl support
> 
> I am sending them in one package because driver depends
> on each other in zynq shared files.
> 
> Thanks for your comments,
> Michal
> 
> P.S.: The first version sent by patman that's why sorry
> for any mistake.
> 
> Changes in v2:
> - New patch in this series to reflect Tom's comments
> - Remove XPSS_ prefix and replace it with ZYNQ
> - Remove CONFIG_ prefix from non configurable macros (scutimer)
> - Remove CONFIG_ prefix from non configurable macro (gem)
> - Remove CONFIG_ prefix from non configurable macros (emio)
> - Remove CONFIG_ prefix from non configurable macros (sdhci)
> - Remove CONFIG_ prefix from non configurable macros (i2c)
> - Fix checkpatch warnings (i2c)
> - Fix #define<space>Macro name (i2c)
> - Fix multiline comments (i2c)
> - Remove trailing 1 for configurations (i2c)
> - Fix bugs reported by Tom Rini
> - Fix checkpatch warnings (fpga)
> - Fix comments (fpga)
> - Do not use CamelCase for XilinxZynq (fpga)
> 
> David Andrey (3):
>   arm: zynq: U-Boot udelay < 1000 FIX
>   net: gem: Pass phy address to init
>   net: gem: Preserve clk on emio interface
> 
> Michal Simek (12):
>   arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses
>   zynq: Move scutimer baseaddr to hardware.h
>   net: phy: Define Marvell 88e1518 phy
>   net: gem: Remove WRAP bit from TX buffer description
>   net: gem: Simplify return path in zynq_gem_recv
>   net: gem: Do not initialize BDs again
>   net: gem: Fix gem driver on 1Gbps LAN
>   zynq: Move macros to hardware.h
>   net: gem: Add support for phy autodetection
>   mmc: Add support for Xilinx Zynq sdhci controller
>   i2c: zynq: Add support for Xilinx Zynq
>   fpga: Add support for loading bitstream for Xilinx Zynq
> 
>  arch/arm/cpu/armv7/zynq/slcr.c             |  61 ++++++
>  arch/arm/cpu/armv7/zynq/timer.c            |  49 ++++-
>  arch/arm/include/asm/arch-zynq/hardware.h  |  36 +++-
>  arch/arm/include/asm/arch-zynq/sys_proto.h |   7 +
>  board/xilinx/zynq/board.c                  |  66 ++++++-
>  drivers/fpga/Makefile                      |   1 +
>  drivers/fpga/xilinx.c                      |  37 ++++
>  drivers/fpga/zynqpl.c                      | 231 ++++++++++++++++++++++
>  drivers/i2c/Makefile                       |   1 +
>  drivers/i2c/zynq_i2c.c                     | 306 +++++++++++++++++++++++++++++
>  drivers/mmc/Makefile                       |   1 +
>  drivers/mmc/zynq_sdhci.c                   |  40 ++++
>  drivers/net/phy/marvell.c                  |  11 ++
>  drivers/net/zynq_gem.c                     | 199 +++++++++++++------
>  include/configs/zynq.h                     |  39 +++-
>  include/netdev.h                           |   2 +-
>  include/xilinx.h                           |   4 +
>  include/zynqpl.h                           |  59 ++++++
>  18 files changed, 1065 insertions(+), 85 deletions(-)
>  create mode 100644 drivers/fpga/zynqpl.c
>  create mode 100644 drivers/i2c/zynq_i2c.c
>  create mode 100644 drivers/mmc/zynq_sdhci.c
>  create mode 100644 include/zynqpl.h

For the series:
Reviewed-by: Tom Rini <trini at ti.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130423/8a99e61c/attachment.pgp>