[U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT

Benoît Thébaudeau benoit.thebaudeau at advansee.com
Tue Apr 9 22:00:00 CEST 2013


On Tuesday, April 9, 2013 9:48:30 PM, Benoît Thébaudeau wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT option so that other NAND controller
> drivers could use it when a 16-bit NAND is deployed.
> 
> drivers/mtd/nand/ndfc has CONFIG_SYS_NDFC_16BIT, so just rename it, so that
> other NAND drivers could reuse the same symbol.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> Acked-by: Scott Wood <scottwood at freescale.com>
> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
> ---
> Changes in v11: None
> Changes in v10: None
> Changes in v9: None
> Changes in v8:
>  - New patch.
> 
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  README                  |    9 ++++++---
>  drivers/mtd/nand/ndfc.c |    4 ++--
>  2 files changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/README b/README
> index 5c5cd18..e9c3145 100644
> --- a/README
> +++ b/README
> @@ -3755,9 +3755,12 @@ Low Level (hardware related) configuration options:
>  - CONFIG_SYS_SRIOn_MEM_SIZE:
>  		Size of SRIO port 'n' memory region
>  
> -- CONFIG_SYS_NDFC_16
> -		Defined to tell the NDFC that the NAND chip is using a
> -		16 bit bus.
> +- CONFIG_SYS_NAND_BUSWIDTH_16BIT
> +		Defined to tell the NAND controller that the NAND chip is using
> +		a 16 bit bus.
> +		Not all NAND drivers use this symbol.
> +		Example of driver that uses it:
> +		- drivers/mtd/nand/ndfc.c
>  
>  - CONFIG_SYS_NDFC_EBC0_CFG
>  		Sets the EBC0_CFG register for the NDFC. If not defined
> diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
> index 6ebbb5e..213d2c9 100644
> --- a/drivers/mtd/nand/ndfc.c
> +++ b/drivers/mtd/nand/ndfc.c
> @@ -156,7 +156,7 @@ static uint8_t ndfc_read_byte(struct mtd_info *mtd)
>  
>  	struct nand_chip *chip = mtd->priv;
>  
> -#ifdef CONFIG_SYS_NDFC_16BIT
> +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
>  	return (uint8_t) readw(chip->IO_ADDR_R);
>  #else
>  	return readb(chip->IO_ADDR_R);
> @@ -218,7 +218,7 @@ int board_nand_init(struct nand_chip *nand)
>  	nand->ecc.bytes = 3;
>  	nand->select_chip = ndfc_select_chip;
>  
> -#ifdef CONFIG_SYS_NDFC_16BIT
> +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
>  	nand->options |= NAND_BUSWIDTH_16;
>  #endif
>  
> --
> 1.7.10.4
> 
> 

Git bundle for v11 here:
http://dl.free.fr/lWM6s9zmk

The changes in v11 are limited to 18/30 (mx31pdk.h).

Best regards,
Benoît


More information about the U-Boot mailing list