[U-Boot] [PATCH] fsl_esdhc: flush cache after IO completion

Eric Nelson eric.nelson at boundarydevices.com
Thu Apr 4 00:31:56 CEST 2013


The cache should invalidate the read buffer for
the SD card interface after the transfer complete,
not command-complete.

Tested-by: Andrew Gabbasov <Andrew_Gabbasov at mentor.com>
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
---
 drivers/mmc/fsl_esdhc.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 54b5363..682b337 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -327,9 +327,6 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 	while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
 		;
 
-	if (data && (data->flags & MMC_DATA_READ))
-		check_and_invalidate_dcache_range(cmd, data);
-
 	irqstat = esdhc_read32(&regs->irqstat);
 	esdhc_write32(&regs->irqstat, irqstat);
 
@@ -403,6 +400,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 		} while (!(irqstat & IRQSTAT_TC) &&
 				(esdhc_read32(&regs->prsstat) & PRSSTAT_DLA));
 #endif
+		if (data->flags & MMC_DATA_READ)
+			check_and_invalidate_dcache_range(cmd, data);
 	}
 
 	esdhc_write32(&regs->irqstat, -1);
-- 
1.7.9.5



More information about the U-Boot mailing list