[U-Boot] Pull request: u-boot-arm/master

[Tom Rini]

On Wed, Apr 17, 2013 at 06:37:06PM +0200, Albert ARIBAUD wrote:

> Hi Tom,
> 
> The following changes since commit
> c4a4e2e20ca226948b62ed116df98f7a3932f2ac:
> 
>   ARMv7: start.S: stay in HYP mode if u-boot is entered in it
>   (2013-04-15 18:30:59 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-arm master
> 
> for you to fetch changes up to f2e8a87305a55652488af140adcf65b1e688f287:
> 
>   exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
> 
> Note: there is a trivial merge conflict for
> include/configs/exynos5250-dt.h:
> 
> ++<<<<<<< HEAD
>  +/* USB boot mode */
>  +#define EXYNOS_COPY_USB_FNPTR_ADDR    0x02020070
>  +#define EXYNOS_USB_SECONDARY_BOOT     0xfeed0002
>  +#define EXYNOS_IRAM_SECONDARY_BASE    0x02020018
> ++=======
> + /* TPM */
> + #define CONFIG_TPM
> + #define CONFIG_CMD_TPM
> + #define CONFIG_INFINEON_TPM_I2C
> + #define CONFIG_INFINEON_TPM_I2C_BUS 3
> + #define CONFIG_INFINEON_TPM_I2C_ADDR 0x20
> ++>>>>>>> u-boot/master
> 
> ----------------------------------------------------------------
> Simon Glass (2):
>       exynos: Correct use of 64-bit division
>       exynos: fdt: Add TMU node for snow
> 
> Stephen Warren (1):
>       ARM: tegra: support T33 SKU of Tegra30
> 
> Thierry Reding (4):
>       Tegra: All Tamonten-derived boards use onboard NAND
>       Tegra: Medcom-Wide: Enable NAND and boot script support
>       Tegra: Plutux: Enable NAND and boot script support
>       Tegra: TEC: Enable boot script support
> 
> Tom Warren (7):
>       Tegra: enable verify support for the crc32 command
>       Tegra: Restore cp15 VBAR _start vector write for ARMv7
>       Tegra: Configure L2 cache control reg properly.
>       Tegra114: Initialize System Counter (TSC) with osc frequency
>       Tegra: Fix MSELECT clock divisors for T30/T114.
>       Tegra: Split tegra_get_chip_type() into soc & sku funcs
>       Tegra: T30: Beaver board support.
> 
> Vivek Gautam (1):
>       Exynos5: Add support for USB download boot mode
> 
>  MAINTAINERS                                    |    1 +
>  arch/arm/cpu/arm720t/tegra-common/cpu.c        |   48 ++++++++-------
>  arch/arm/cpu/arm720t/tegra-common/cpu.h        |    4 +-
>  arch/arm/cpu/arm720t/tegra114/cpu.c            |   10 ++--
>  arch/arm/cpu/arm720t/tegra30/cpu.c             |    4 +-
>  arch/arm/cpu/armv7/s5p-common/timer.c          |    7 ++-
>  arch/arm/cpu/armv7/start.S                     |    2 -
>  arch/arm/cpu/tegra-common/Makefile             |    2 +-
>  arch/arm/cpu/tegra-common/ap.c                 |   53 +++++++++++------
>  arch/arm/cpu/tegra-common/cache.c              |   48 +++++++++++++++
>  arch/arm/cpu/tegra-common/clock.c              |    3 +
>  arch/arm/cpu/tegra114-common/clock.c           |   22 +++++++
>  arch/arm/cpu/tegra20-common/clock.c            |    4 ++
>  arch/arm/cpu/tegra20-common/pmu.c              |    4 +-
>  arch/arm/cpu/tegra30-common/clock.c            |    4 ++
>  arch/arm/include/asm/arch-tegra/ap.h           |   21 ++++++-
>  arch/arm/include/asm/arch-tegra/clock.h        |    3 +
>  arch/arm/include/asm/arch-tegra/tegra.h        |    1 +
>  arch/arm/include/asm/arch-tegra114/sysctr.h    |   35 +++++++++++
>  arch/arm/include/asm/arch-tegra114/tegra.h     |    1 +
>  board/avionic-design/dts/tegra20-tamonten.dtsi |   11 ++++
>  board/avionic-design/dts/tegra20-tec.dts       |   11 ----
>  board/nvidia/common/emc.c                      |    2 +-
>  board/nvidia/dts/tegra30-beaver.dts            |   71
>  ++++++++++++++++++++++ board/samsung/dts/exynos5250-snow.dts
>  |   14 +++++ board/samsung/smdk5250/spl_boot.c              |   40
>  ++++++++++++- boards.cfg                                     |    1 +
>  include/configs/beaver.h                       |   76
>  ++++++++++++++++++++++++
>  include/configs/exynos5250-dt.h                |    5 ++
>  include/configs/medcom-wide.h                  |   21 ++++---
>  include/configs/plutux.h                       |   18 +++---
>  include/configs/tec.h                          |   10 +---
>  include/configs/tegra-common.h                 |    2 + 33 files
>  changed, 467 insertions(+), 92 deletions(-) create mode 100644
>  arch/arm/cpu/tegra-common/cache.c create mode 100644
>  arch/arm/include/asm/arch-tegra114/sysctr.h create mode 100644
>  board/nvidia/dts/tegra30-beaver.dts create mode 100644
>  include/configs/beaver.h

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130418/a3e31d77/attachment.pgp>