[U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
mk7.kang at samsung.com
Mon Apr 1 13:57:30 CEST 2013
On 21/03/13 20:33, Rajeshwari Shinde wrote:
> This patch adds support for gpio pin numbering support on
> EXYNOS5250
> To have consistent 0..n-1 GPIO numbering the banks are divided
> into different parts where ever they have holes in them.
>
> Signed-off-by: Leela Krishna Amudala <l.krishna at samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> ---
> Changes in V2:
> - none.
> Changes in V3:
> - none.
> Changes in V4:
> - To have consistent 0..n-1 GPIO numbering the banks are divided
> into different parts where ever they have holes in them.
> - Combined previous patch 1 and 2 into single patch.
> arch/arm/cpu/armv7/exynos/pinmux.c | 148 +++++-------
> arch/arm/include/asm/arch-exynos/cpu.h | 10 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 376 ++++++++++++++++++++++++++++++-
> board/samsung/smdk5250/smdk5250.c | 24 +--
> drivers/gpio/s5p_gpio.c | 65 ++++++-
> 5 files changed, 508 insertions(+), 115 deletions(-)
>
> diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
> index 656bf4a..1b882cb 100644
> --- a/drivers/gpio/s5p_gpio.c
> +++ b/drivers/gpio/s5p_gpio.c
> @@ -36,6 +36,27 @@
> #define RATE_MASK(x) (0x1 << (x + 16))
> #define RATE_SET(x) (0x1 << (x + 16))
>
> +
> +struct gpio_info {
> + unsigned int reg_addr; /* Address of register for this part */
> + unsigned int max_gpio; /* Maximum GPIO in this part */
> +};
> +
> +#ifdef CONFIG_EXYNOS5
I think, this ifdef is unnecessary.
> +static const struct gpio_info gpio_data[EXYNOS5_GPIO_NUM_PARTS] = {
maybe it should be exynos5_gpio_data?
> + { EXYNOS5_GPIO_PART1_BASE, EXYNOS5_GPIO_MAX_PORT_PART_1 },
> + { EXYNOS5_GPIO_PART2_BASE, EXYNOS5_GPIO_MAX_PORT_PART_2 },
> + { EXYNOS5_GPIO_PART3_BASE, EXYNOS5_GPIO_MAX_PORT_PART_3 },
> + { EXYNOS5_GPIO_PART4_BASE, EXYNOS5_GPIO_MAX_PORT_PART_4 },
> + { EXYNOS5_GPIO_PART5_BASE, EXYNOS5_GPIO_MAX_PORT_PART_5 },
> + { EXYNOS5_GPIO_PART6_BASE, EXYNOS5_GPIO_MAX_PORT_PART_6 },
> + { EXYNOS5_GPIO_PART7_BASE, EXYNOS5_GPIO_MAX_PORT_PART_7 },
> + { EXYNOS5_GPIO_PART8_BASE, EXYNOS5_GPIO_MAX_PORT },
> +};
> +
> +#define HAVE_GENERIC_GPIO
> +#endif
> +
> void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
> {
> unsigned int value;
> @@ -141,7 +162,30 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
>
> writel(value, &bank->drv);
> }
> -
> +#ifdef HAVE_GENERIC_GPIO
> +static struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio)
please consider exynos4 also.
> +{
> + const struct gpio_info *data;
> + unsigned int upto;
> + int i;
> +
> + for (i = upto = 0, data = gpio_data; i < EXYNOS5_GPIO_NUM_PARTS;
> + i++, upto = data->max_gpio, data++) {
> + debug("i=%d, upto=%d\n", i, upto);
> + if (gpio < data->max_gpio) {
> + struct s5p_gpio_bank *bank;
> + bank = (struct s5p_gpio_bank *)data->reg_addr;
> + bank += (gpio - upto) / GPIO_PER_BANK;
> + debug(" gpio=%d, bank=%p\n", gpio, bank);
> + return bank;
> + }
> + }
> +#ifndef CONFIG_SPL_BUILD
> + assert(gpio < EXYNOS5_GPIO_MAX_PORT); /* ...which it will not be */
> +#endif
> + return NULL;
> +}
> +#else
> struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio)
> {
> int bank;
> @@ -151,6 +195,7 @@ struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio)
> bank *= sizeof(struct s5p_gpio_bank);
> return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank);
> }
> +#endif
>
> int s5p_gpio_get_pin(unsigned gpio)
> {
> @@ -196,3 +241,21 @@ int gpio_set_value(unsigned gpio, int value)
>
> return 0;
> }
> +
> +void gpio_set_pull(int gpio, int mode)
> +{
> + s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
> + s5p_gpio_get_pin(gpio), mode);
> +}
> +
> +void gpio_set_drv(int gpio, int mode)
> +{
> + s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
> + s5p_gpio_get_pin(gpio), mode);
> +}
> +
> +void gpio_cfg_pin(int gpio, int cfg)
> +{
> + s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
> + s5p_gpio_get_pin(gpio), cfg);
> +}
>
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list