[U-Boot] [PATCH 1/8] pxa_lcd: add the ACX544AKN lcd device

[Mike Dunn]

This adds the definitions required to support the LCD device on the Palm Treo
680.

Signed-off-by: Mike Dunn <mikedunn at newsguy.com>
---
 drivers/video/pxa_lcd.c |   32 ++++++++++++++++++++++++++++++++
 1 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c
index b40ec36..d5fbe7b 100644
--- a/drivers/video/pxa_lcd.c
+++ b/drivers/video/pxa_lcd.c
@@ -248,6 +248,38 @@ vidinfo_t panel_info = {
 };
 #endif /* CONFIG_ACX517AKN */
 
+#ifdef CONFIG_ACX544AKN
+
+# define LCD_BPP	LCD_COLOR16
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0	0x003008f9
+# define REG_LCCR3	0x04700007 /* 16bpp */
+
+vidinfo_t panel_info = {
+	.vl_col		= 320,
+	.vl_row		= 320,
+	.vl_width	= 320,
+	.vl_height	= 320,
+	.vl_clkp	= CONFIG_SYS_LOW,
+	.vl_oep		= CONFIG_SYS_LOW,
+	.vl_hsp		= CONFIG_SYS_LOW,
+	.vl_vsp		= CONFIG_SYS_LOW,
+	.vl_dp		= CONFIG_SYS_LOW,
+	.vl_bpix	= LCD_BPP,
+	.vl_lbw		= 0,
+	.vl_splt	= 0,
+	.vl_clor	= 1,
+	.vl_tft		= 1,
+	.vl_hpw		= 0x05,
+	.vl_blw		= 0x13,
+	.vl_elw		= 0x08,
+	.vl_vpw		= 0x02,
+	.vl_bfw		= 0x07,
+	.vl_efw		= 0x05,
+};
+#endif /* CONFIG_ACX544AKN */
+
 /*----------------------------------------------------------------------*/
 
 #ifdef CONFIG_LQ038J7DH53
-- 
1.7.8.6