[U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command

[Stefano Babic]

On 03/04/2013 11:57, Javier Martinez Canillas wrote:
> board/freescale/mx6qsabrelite/README explain a procedure to
> update the SPI-NOR on the SabreLite board without Freescale
> manufacturing tool but following this procedure leads to both
> "sf erase" and "sf write" failing on a mx6qsabrelite board:
> 
> MX6QSABRELITE U-Boot > sf probe 1
> MX6QSABRELITE U-Boot > sf erase 0 0x40000
> SPI flash erase failed
> MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000
> SPI flash write failed
> 
> This is because the chip-select 1 is wrong and the correct
> value is 0x7300.
> 
> Since commit c1173bd0 ("sf command: allow default bus and chip selects")
> the chip-select and bus arguments for the sf probe command are optional
> so let's just remove it and use "sf probe" instead.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> ---


Applied to u-boot-imx, thanks.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================