[U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command

[Javier Martinez Canillas]

board/freescale/mx6qsabrelite/README explain a procedure to
update the SPI-NOR on the SabreLite board without Freescale
manufacturing tool but following this procedure leads to both
"sf erase" and "sf write" failing on a mx6qsabrelite board:

MX6QSABRELITE U-Boot > sf probe 1
MX6QSABRELITE U-Boot > sf erase 0 0x40000
SPI flash erase failed
MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000
SPI flash write failed

This is because the chip-select 1 is wrong and the correct
value is 0x7300.

Since commit c1173bd0 ("sf command: allow default bus and chip selects")
the chip-select and bus arguments for the sf probe command are optional
so let's just remove it and use "sf probe" instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
---

Changes since v1:
  - Fix the description by explaining that the chip-select can be passed
    but the value "1" is wrong and is not strictly required; suggested by
    Stefano Babic.

 board/freescale/mx6qsabrelite/README |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/freescale/mx6qsabrelite/README b/board/freescale/mx6qsabrelite/README
index 6f2f534..324b116 100644
--- a/board/freescale/mx6qsabrelite/README
+++ b/board/freescale/mx6qsabrelite/README
@@ -40,7 +40,7 @@ enter the following commands:
 
  MX6Q SABRELITE U-Boot > mmc dev 0
  MX6Q SABRELITE U-Boot > mmc read 0x10800000 0 200
- MX6Q SABRELITE U-Boot > sf probe 1
+ MX6Q SABRELITE U-Boot > sf probe
  MX6Q SABRELITE U-Boot > sf erase 0 0x40000
  MX6Q SABRELITE U-Boot > sf write 0x10800000 0 0x40000
 
-- 
1.7.7.6