[U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Alison Wang
b18965 at freescale.com
Fri Apr 12 08:53:52 CEST 2013
This patch adds Freescale vybrid vf600 tower board support.
Signed-off-by: TsiChung Liew <tsicliew at gmail.com>
Signed-off-by: Jason Jin <Jason.jin at freescale.com>
Signed-off-by: Alison Wang <b18965 at freescale.com>
---
board/freescale/vybrid/Makefile | 40 +++
board/freescale/vybrid/vybrid.c | 488 +++++++++++++++++++++++++++++++++
board/freescale/vybrid/vybridimage.cfg | 44 +++
boards.cfg | 2 +
include/configs/vybrid.h | 284 +++++++++++++++++++
include/configs/vybrid_iram.h | 284 +++++++++++++++++++
6 files changed, 1142 insertions(+)
create mode 100644 board/freescale/vybrid/Makefile
create mode 100644 board/freescale/vybrid/vybrid.c
create mode 100644 board/freescale/vybrid/vybridimage.cfg
create mode 100644 include/configs/vybrid.h
create mode 100644 include/configs/vybrid_iram.h
diff --git a/board/freescale/vybrid/Makefile b/board/freescale/vybrid/Makefile
new file mode 100644
index 0000000..0749b21
--- /dev/null
+++ b/board/freescale/vybrid/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright 2012-2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/vybrid/vybrid.c b/board/freescale/vybrid/vybrid.c
new file mode 100644
index 0000000..c2da1ff
--- /dev/null
+++ b/board/freescale/vybrid/vybrid.c
@@ -0,0 +1,488 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fec.h>
+#include <asm/arch/vybrid-regs.h>
+#include <asm/arch/vybrid-pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <usb/ehci-fsl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DDR_IOMUX 0x00000180
+#define DDR_IOMUX1 0x00010180
+
+#define PHY_DQ_TIMING 0x00002613
+#define PHY_DQS_TIMING 0x00002615
+#define PHY_CTRL 0x01210080
+#define PHY_MASTER_CTRL 0x0001012a
+#define PHY_SLAVE_CTRL 0x00012020
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[2] = {
+ {CONFIG_SYS_ESDHC1_BASE, 1},
+ {ESDHC2_BASE_ADDR, 1},
+};
+#endif
+
+void setup_iomux_ddr(void)
+{
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A15);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A14);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A13);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A12);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A11);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A10);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A9);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A8);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A7);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A6);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A5);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A4);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A3);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A2);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_A1);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_BA2);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_BA1);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_BA0);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_CAS);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_CKE);
+ __raw_writel(DDR_IOMUX1, IOMUXC_DDR_CLK);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_CS);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D15);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D14);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D13);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D12);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D11);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D10);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D9);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D8);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D7);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D6);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D5);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D4);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D3);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D2);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D1);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_D0);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_DQM1);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_DQM0);
+ __raw_writel(DDR_IOMUX1, IOMUXC_DDR_DQS1);
+ __raw_writel(DDR_IOMUX1, IOMUXC_DDR_DQS0);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_RAS);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_WE);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_ODT1);
+ __raw_writel(DDR_IOMUX, IOMUXC_DDR_ODT0);
+}
+
+void ddr_phy_init(void)
+{
+ /* phy_dq_timing_reg freq set 0 */
+ __raw_writel(PHY_DQ_TIMING, DDR_PHY000);
+ __raw_writel(PHY_DQ_TIMING, DDR_PHY016);
+ __raw_writel(PHY_DQ_TIMING, DDR_PHY032);
+ __raw_writel(PHY_DQ_TIMING, DDR_PHY048);
+
+ /* phy_dqs_timing_reg freq set 0 */
+ __raw_writel(PHY_DQS_TIMING, DDR_PHY001);
+ __raw_writel(PHY_DQS_TIMING, DDR_PHY017);
+ __raw_writel(PHY_DQS_TIMING, DDR_PHY033);
+ __raw_writel(PHY_DQS_TIMING, DDR_PHY049);
+
+ /* phy_gate_lpbk_ctrl_reg freq set 0 */
+ __raw_writel(PHY_CTRL, DDR_PHY002); /* read delay bit21:19 */
+ __raw_writel(PHY_CTRL, DDR_PHY018); /* phase_detect_sel bit18:16 */
+ __raw_writel(PHY_CTRL, DDR_PHY034); /* bit lpbk_ctrl bit12 */
+ __raw_writel(PHY_CTRL, DDR_PHY050);
+
+ /* phy_dll_master_ctrl_reg freq set 0 */
+ __raw_writel(PHY_MASTER_CTRL, DDR_PHY003);
+ __raw_writel(PHY_MASTER_CTRL, DDR_PHY019);
+ __raw_writel(PHY_MASTER_CTRL, DDR_PHY035);
+ __raw_writel(PHY_MASTER_CTRL, DDR_PHY051);
+
+ /* phy_dll_slave_ctrl_reg freq set 0 */
+ __raw_writel(PHY_SLAVE_CTRL, DDR_PHY004);
+ __raw_writel(PHY_SLAVE_CTRL, DDR_PHY020);
+ __raw_writel(PHY_SLAVE_CTRL, DDR_PHY036);
+ __raw_writel(PHY_SLAVE_CTRL, DDR_PHY052);
+
+ __raw_writel(0x00001105, DDR_PHY050);
+}
+
+unsigned long ddr_ctrl_init(void)
+{
+ int dram_size, rows, cols, banks, port;
+
+ __raw_writel(0x00000600, DDR_CR000); /* LPDDR2 or DDR3 */
+ __raw_writel(0x00000020, DDR_CR002); /* TINIT */
+ __raw_writel(0x0000007c, DDR_CR010); /* reset during power on */
+ /* warm boot - 200ns */
+ __raw_writel(0x00013880, DDR_CR011); /* 500us - 10ns */
+ __raw_writel(0x0000050c, DDR_CR012); /* CASLAT_LIN, WRLAT */
+ __raw_writel(0x15040404, DDR_CR013); /* trc, trrd, tccd
+ tbst_int_interval */
+ __raw_writel(0x1406040F, DDR_CR014); /* tfaw, tfp, twtr, tras_min */
+ __raw_writel(0x04040000, DDR_CR016); /* tmrd, trtp */
+ __raw_writel(0x006DB00C, DDR_CR017); /* tras_max, tmod */
+ __raw_writel(0x00000403, DDR_CR018); /* tckesr, tcke */
+
+ __raw_writel(0x01000000, DDR_CR020); /* ap, writrp */
+ __raw_writel(0x06060101, DDR_CR021); /* trcd_int, tras_lockout
+ ccAP */
+ __raw_writel(0x000B0000, DDR_CR022); /* tdal */
+ __raw_writel(0x03000200, DDR_CR023); /* bstlen, tmrr, tdll */
+ __raw_writel(0x00000006, DDR_CR024); /* addr_mirror, reg_dimm
+ trp_ab */
+ __raw_writel(0x00010000, DDR_CR025); /* tref_enable, auto_refresh
+ arefresh */
+ __raw_writel(0x0C28002C, DDR_CR026); /* tref, trfc */
+ __raw_writel(0x00000005, DDR_CR028); /* tref_interval fixed at 5 */
+ __raw_writel(0x00000003, DDR_CR029); /* tpdex */
+
+ __raw_writel(0x0000000A, DDR_CR030); /* txpdll */
+ __raw_writel(0x00440200, DDR_CR031); /* txsnr, txsr */
+ __raw_writel(0x00010000, DDR_CR033); /* cke_dly, en_quick_srefresh
+ * srefresh_exit_no_refresh,
+ * pwr, srefresh_exit
+ */
+ __raw_writel(0x00050500, DDR_CR034); /* cksrx, */
+ /* cksre, lowpwr_ref_en */
+
+ /* Frequency change */
+ __raw_writel(0x00000100, DDR_CR038); /* freq change... */
+ __raw_writel(0x04001002, DDR_CR039);
+
+ __raw_writel(0x00000001, DDR_CR041); /* dfi_init_start */
+ __raw_writel(0x00000000, DDR_CR045); /* wrmd */
+ __raw_writel(0x00000000, DDR_CR046); /* rdmd */
+ __raw_writel(0x00000000, DDR_CR047); /* REF_PER_AUTO_TEMPCHK:
+ * LPDDR2 set to 2, else 0
+ */
+
+ /* DRAM device Mode registers */
+ __raw_writel(0x00460420, DDR_CR048); /* mr0, ddr3 burst of 8 only
+ * mr1, if freq < 125
+ * dll_dis = 1, rtt = 0
+ * if freq > 125, dll_dis = 0
+ * rtt = 3
+ */
+ __raw_writel(0x00000000, DDR_CR049); /* mr2 */
+ __raw_writel(0x00000000, DDR_CR051); /* mr3 & mrsingle_data_0 */
+
+ __raw_writel(0x00000000, DDR_CR057); /* ctrl_raw */
+
+ /* ZQ stuff */
+ __raw_writel(0x01000200, DDR_CR066); /* zqcl, zqinit */
+ __raw_writel(0x02000040, DDR_CR067); /* zqcs */
+ __raw_writel(0x00000200, DDR_CR069); /* zq_on_sref_exit, qz_req */
+
+ __raw_writel(0x00000040, DDR_CR070); /* ref_per_zq */
+ __raw_writel(0x00000000, DDR_CR071); /* zqreset, ddr3 set to 0 */
+ __raw_writel(0x01000000, DDR_CR072); /* zqcs_rotate, no_zq_init */
+
+ /* DRAM controller misc */
+ __raw_writel(0x0a010300, DDR_CR073); /* arebit, col_diff, row_diff
+ bank_diff */
+ __raw_writel(0x0101ffff, DDR_CR074); /* bank_split, addr_cmp_en
+ cmd/age cnt */
+ __raw_writel(0x01010101, DDR_CR075); /* rw same pg, rw same en
+ pri en, plen */
+ __raw_writel(0x03030101, DDR_CR076); /* #q_entries_act_dis
+ * (#cmdqueues
+ * dis_rw_grp_w_bnk_conflict
+ * w2r_split_en, cs_same_en */
+ __raw_writel(0x01000101, DDR_CR077); /* cs_map, inhibit_dram_cmd
+ * dis_interleave, swen */
+ __raw_writel(0x0000000C, DDR_CR078); /* qfull, lpddr2_s4, reduc
+ burst_on_fly */
+ __raw_writel(0x01000000, DDR_CR079); /* ctrlupd_req_per aref en
+ * ctrlupd_req
+ * ctrller busy
+ * in_ord_accept */
+ /* disable interrupts */
+ __raw_writel(0x1FFFFFFF, DDR_CR082);
+
+ /* ODT */
+ __raw_writel(0x01010000, DDR_CR087); /* odt: wr_map_cs0
+ * rd_map_cs0
+ * port_data_err_id */
+ __raw_writel(0x00040000, DDR_CR088); /* todtl_2cmd */
+ __raw_writel(0x00000002, DDR_CR089); /* add_odt stuff */
+
+ __raw_writel(0x00020000, DDR_CR091);
+ __raw_writel(0x00000000, DDR_CR092); /* tdqsck _min, max */
+
+ __raw_writel(0x00002819, DDR_CR096); /* wlmrd, wldqsen */
+
+ /* AXI ports */
+ __raw_writel(0x00202000, DDR_CR105);
+ __raw_writel(0x20200000, DDR_CR106);
+ __raw_writel(0x00002020, DDR_CR110);
+ __raw_writel(0x00202000, DDR_CR114);
+ __raw_writel(0x20200000, DDR_CR115);
+
+ __raw_writel(0x00000101, DDR_CR117); /* FIFO type (0-async, 1-2:1
+ * 2-1:2, 3- sync, w_pri
+ * r_pri
+ */
+ __raw_writel(0x01010000, DDR_CR118); /* w_pri, rpri, en */
+ __raw_writel(0x00000000, DDR_CR119); /* fifo_type */
+
+ __raw_writel(0x02020000, DDR_CR120);
+ __raw_writel(0x00000202, DDR_CR121);
+ __raw_writel(0x01010064, DDR_CR122);
+ __raw_writel(0x00000101, DDR_CR123);
+ __raw_writel(0x00000064, DDR_CR124);
+
+ /* TDFI */
+ __raw_writel(0x00000000, DDR_CR125);
+ __raw_writel(0x00000B00, DDR_CR126); /* PHY rdlat */
+ __raw_writel(0x00000000, DDR_CR127); /* dram ck dis */
+
+ __raw_writel(0x00000000, DDR_CR131);
+ __raw_writel(0x00000506, DDR_CR132); /* wrlat, rdlat */
+ __raw_writel(0x02000000, DDR_CR137);
+ __raw_writel(0x04070303, DDR_CR139);
+
+ __raw_writel(0x00000000, DDR_CR136);
+
+ __raw_writel(0x68200000, DDR_CR154);
+ __raw_writel(0x00000202, DDR_CR155); /* pad_ibe, _sel */
+ __raw_writel(0x00000006, DDR_CR158); /* twr */
+ __raw_writel(0x00000006, DDR_CR159); /* todth */
+
+ ddr_phy_init();
+
+ __raw_writel(0x00000601, DDR_CR000); /* LPDDR2 or DDR3, start */
+
+ udelay(200);
+
+ rows = (__raw_readl(DDR_CR001) & 0x1F) -
+ ((__raw_readl(DDR_CR073) >> 8) & 3);
+ cols = ((__raw_readl(DDR_CR001) >> 8) & 0xF) -
+ ((__raw_readl(DDR_CR073) >> 16) & 7);
+ banks = 1 << (3 - (__raw_readl(DDR_CR073) & 3));
+ port = ((__raw_readl(DDR_CR078) >> 8) & 1) ? 1 : 2;
+
+ dram_size = (1 << (rows + cols)) * banks * port;
+
+ return dram_size;
+}
+
+int dram_init(void)
+{
+ setup_iomux_ddr();
+#ifdef CONFIG_SYS_UBOOT_IN_GPURAM
+ gd->ram_size = 0x80000;
+ ddr_ctrl_init();
+#else
+ gd->ram_size = ddr_ctrl_init();
+#endif
+ return 0;
+}
+
+void setup_iomux_uart(void)
+{
+ __raw_writel(0x002011a2, IOMUXC_PAD_026);
+ __raw_writel(0x002011a1, IOMUXC_PAD_027);
+ __raw_writel(0x002011a2, IOMUXC_PAD_028);
+ __raw_writel(0x002011a1, IOMUXC_PAD_029);
+ __raw_writel(0x001011a2, IOMUXC_PAD_032);
+ __raw_writel(0x001011a1, IOMUXC_PAD_033);
+}
+
+#ifdef CONFIG_CMD_NET
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+ __raw_writel(0x00203191, IOMUXC_PAD_000); /* RMII_CLK */
+
+ if (setclear) {
+ if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+ __raw_writel(0x00103192, IOMUXC_PAD_045); /*MDC*/
+ __raw_writel(0x00103193, IOMUXC_PAD_046); /*MDIO*/
+ __raw_writel(0x00103191, IOMUXC_PAD_047); /*RxDV*/
+ __raw_writel(0x00103191, IOMUXC_PAD_048); /*RxD1*/
+ __raw_writel(0x00103191, IOMUXC_PAD_049); /*RxD0*/
+ __raw_writel(0x00103191, IOMUXC_PAD_050); /*RxER*/
+ __raw_writel(0x00103192, IOMUXC_PAD_051); /*TxD1*/
+ __raw_writel(0x00103192, IOMUXC_PAD_052); /*TxD0*/
+ __raw_writel(0x00103192, IOMUXC_PAD_053); /*TxEn*/
+ }
+ if (info->iobase == CONFIG_SYS_FEC1_IOBASE) {
+ __raw_writel(0x00103192, IOMUXC_PAD_054); /*MDC*/
+ __raw_writel(0x00103193, IOMUXC_PAD_055); /*MDIO*/
+ __raw_writel(0x00103191, IOMUXC_PAD_056); /*RxDV*/
+ __raw_writel(0x00103191, IOMUXC_PAD_057); /*RxD1*/
+ __raw_writel(0x00103191, IOMUXC_PAD_058); /*RxD0*/
+ __raw_writel(0x00103191, IOMUXC_PAD_059); /*RxER*/
+ __raw_writel(0x00103192, IOMUXC_PAD_060); /*TxD1*/
+ __raw_writel(0x00103192, IOMUXC_PAD_061); /*TxD0*/
+ __raw_writel(0x00103192, IOMUXC_PAD_062); /*TxEn*/
+ }
+ } else {
+ if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+ __raw_writel(0x00003192, IOMUXC_PAD_045); /*MDC*/
+ __raw_writel(0x00003193, IOMUXC_PAD_046); /*MDIO*/
+ __raw_writel(0x00003191, IOMUXC_PAD_047); /*RxDV*/
+ __raw_writel(0x00003191, IOMUXC_PAD_048); /*RxD1*/
+ __raw_writel(0x00003191, IOMUXC_PAD_049); /*RxD0*/
+ __raw_writel(0x00003191, IOMUXC_PAD_050); /*RxER*/
+ __raw_writel(0x00003192, IOMUXC_PAD_051); /*TxD1*/
+ __raw_writel(0x00003192, IOMUXC_PAD_052); /*TxD0*/
+ __raw_writel(0x00003192, IOMUXC_PAD_053); /*TxEn*/
+ }
+ if (info->iobase == CONFIG_SYS_FEC1_IOBASE) {
+ __raw_writel(0x00003192, IOMUXC_PAD_054); /*MDC*/
+ __raw_writel(0x00003193, IOMUXC_PAD_055); /*MDIO*/
+ __raw_writel(0x00003191, IOMUXC_PAD_056); /*RxDV*/
+ __raw_writel(0x00003191, IOMUXC_PAD_057); /*RxD1*/
+ __raw_writel(0x00003191, IOMUXC_PAD_058); /*RxD0*/
+ __raw_writel(0x00003191, IOMUXC_PAD_059); /*RxER*/
+ __raw_writel(0x00003192, IOMUXC_PAD_060); /*TxD1*/
+ __raw_writel(0x00003192, IOMUXC_PAD_061); /*TxD0*/
+ __raw_writel(0x00003192, IOMUXC_PAD_062); /*TxEn*/
+ }
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_QUAD_SPI
+void setup_iomux_quadspi(void)
+{
+ __raw_writel(0x001030C3, IOMUXC_PAD_079); /* SCK */
+ __raw_writel(0x001030FF, IOMUXC_PAD_080); /* CS0 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_081); /* D3 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_082); /* D2 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_083); /* D1 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_084); /* D0 */
+
+ __raw_writel(0x001030C3, IOMUXC_PAD_086); /* SCK */
+ __raw_writel(0x001030FF, IOMUXC_PAD_087); /* CS0 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_088); /* D3 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_089); /* D2 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_090); /* D1 */
+ __raw_writel(0x001030C3, IOMUXC_PAD_091); /* D0 */
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_getcd(struct mmc *mmc)
+{
+ int ret;
+
+ __raw_writel(0x005031ef, IOMUXC_PAD_014); /* clk */
+ __raw_writel(0x005031ef, IOMUXC_PAD_015); /* cmd */
+ __raw_writel(0x005031ef, IOMUXC_PAD_016); /* dat0 */
+ __raw_writel(0x005031ef, IOMUXC_PAD_017); /* dat1 */
+ __raw_writel(0x005031ef, IOMUXC_PAD_018); /* dat2 */
+ __raw_writel(0x005031ef, IOMUXC_PAD_019); /* dat3 */
+
+ ret = 1;
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ u32 index = 0;
+ s32 status = 0;
+
+ esdhc_cfg[0].sdhc_clk = 132000000;
+ esdhc_cfg[1].sdhc_clk = 132000000;
+ status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
+ return status;
+}
+#endif
+
+#ifdef CONFIG_NAND_FSL_NFC
+void setup_iomux_nfc(void)
+{
+ __raw_writel(0x002038df, IOMUXC_PAD_063);
+ __raw_writel(0x002038df, IOMUXC_PAD_064);
+ __raw_writel(0x002038df, IOMUXC_PAD_065);
+ __raw_writel(0x002038df, IOMUXC_PAD_066);
+ __raw_writel(0x002038df, IOMUXC_PAD_067);
+ __raw_writel(0x002038df, IOMUXC_PAD_068);
+ __raw_writel(0x002038df, IOMUXC_PAD_069);
+ __raw_writel(0x002038df, IOMUXC_PAD_070);
+ __raw_writel(0x002038df, IOMUXC_PAD_071);
+ __raw_writel(0x002038df, IOMUXC_PAD_072);
+ __raw_writel(0x002038df, IOMUXC_PAD_073);
+ __raw_writel(0x002038df, IOMUXC_PAD_074);
+ __raw_writel(0x002038df, IOMUXC_PAD_075);
+ __raw_writel(0x002038df, IOMUXC_PAD_076);
+ __raw_writel(0x002038df, IOMUXC_PAD_077);
+ __raw_writel(0x002038df, IOMUXC_PAD_078);
+
+ __raw_writel(0x005038d2, IOMUXC_PAD_094);
+ __raw_writel(0x005038d2, IOMUXC_PAD_095);
+ __raw_writel(0x006038d2, IOMUXC_PAD_097);
+ __raw_writel(0x005038dd, IOMUXC_PAD_099);
+ __raw_writel(0x006038d2, IOMUXC_PAD_100);
+ __raw_writel(0x006038d2, IOMUXC_PAD_101);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+#ifdef CONFIG_NAND_FSL_NFC
+ setup_iomux_nfc();
+#endif
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_MXC_SPI
+ setup_iomux_spi();
+#endif
+ return 0;
+}
+#endif
+
+int checkboard(void)
+{
+ puts("Board: Vybrid\n");
+
+ return 0;
+}
diff --git a/board/freescale/vybrid/vybridimage.cfg b/board/freescale/vybrid/vybridimage.cfg
new file mode 100644
index 0000000..5da5659
--- /dev/null
+++ b/board/freescale/vybrid/vybridimage.cfg
@@ -0,0 +1,44 @@
+#
+# Copyright 2012-2013 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM sd
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
diff --git a/boards.cfg b/boards.cfg
index 7725a15..2700a76 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -244,6 +244,8 @@ am335x_evm_uart5 arm armv7 am335x ti
am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
pcm051 arm armv7 pcm051 phytec am33xx pcm051
highbank arm armv7 highbank - highbank
+vybrid arm armv7 vybrid freescale vybrid vybrid:VYBRID_CONFIG=board/freescale/vybrid/vybridimage.cfg
+vybrid_iram arm armv7 vybrid freescale vybrid vybrid_iram:VYBRID_CONFIG=board/freescale/vybrid/vybridimage.cfg
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
diff --git a/include/configs/vybrid.h b/include/configs/vybrid.h
new file mode 100644
index 0000000..d915bd0
--- /dev/null
+++ b/include/configs/vybrid.h
@@ -0,0 +1,284 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the vybrid Board
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+
+#define CONFIG_VYBRID
+
+#define CONFIG_SYS_VYBRID_HCLK 24000000
+#define CONFIG_SYS_VYBRID_CLK32 32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_IPG
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#include <asm/arch/vybrid-regs.h>
+
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#undef CONFIG_SETUP_MEMORY_TAGS
+#undef CONFIG_INITRD_TAG
+
+#undef CONFIG_OF_LIBFDT
+
+#define CONFIG_MACH_TYPE MACH_TYPE_VYBRID_VF6XX
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Hardware drivers */
+#define CONFIG_VYBRID_UART
+#define CONFIG_VYBRID_UART_BASE UART0_BASE
+#define CONFIG_VYBRID_GPIO
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_UART_PORT (1)
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PING
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADB /* loadb */
+#undef CONFIG_CMD_LOADS /* loads */
+
+#define CONFIG_SYS_TEXT_BASE 0x3f000800
+
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_SYS_ESDHC1_BASE ESDHC2_BASE_ADDR
+#define CONFIG_SYS_ESDHC2_BASE ESDHC2_BASE_ADDR
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * NAND FLASH
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_MTD_NAND_FSL_NFC_SWECC 1
+#define CONFIG_JFFS2_NAND
+#define CONFIG_NAND_FSL_NFC
+#define CONFIG_SYS_NAND_BASE 0x400E0000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+#define CONFIG_QUAD_SPI
+
+/* Network configuration */
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_MII 1
+# define CONFIG_MII_INIT 1
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC1_PINMUX 0
+# define CONFIG_SYS_FEC0_IOBASE MACNET0_BASE_ADDR
+# define CONFIG_SYS_FEC1_IOBASE MACNET1_BASE_ADDR
+# define CONFIG_SYS_FEC0_MIIBASE MACNET0_BASE_ADDR
+# define CONFIG_SYS_FEC1_MIIBASE MACNET0_BASE_ADDR
+# define MCFFEC_TOUT_LOOP 50000
+# undef CONFIG_HAS_ETH1
+
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
+# define CONFIG_ETHPRIME "FEC0"
+# define CONFIG_IPADDR 10.81.67.175
+# define CONFIG_NETMASK 255.255.252.0
+# define CONFIG_SERVERIP 10.81.64.153
+# define CONFIG_GATEWAYIP 10.81.67.254
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_LOADADDR 0x80010000 /* loadaddr env var */
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Vybrid U-Boot > "
+#undef CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x80010000
+#define CONFIG_SYS_MEMTEST_END 0x87C00000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+#undef CONFIG_CMDLINE_EDITING
+
+#define CONFIG_PRAM 2048
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE (0x80000000)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* timer */
+#define FTM_BASE_ADDR FTM0_BASE_ADDR
+#define CONFIG_TMR_USEPIT
+
+/* clock/PLL configuration */
+/* uart0-2 */
+#define CONFIG_SYS_CLKCTL_CCGR0 0x000FC000
+/* crc, pit, ftm0/1, a5/m4 wdog */
+#define CONFIG_SYS_CLKCTL_CCGR1 0xF00FC0C0
+/* lptmr, qspi0, iomuxc, gpio */
+#define CONFIG_SYS_CLKCTL_CCGR2 0x0FFF0303
+/* anadig, scscm*/
+#define CONFIG_SYS_CLKCTL_CCGR3 0x00000033
+/* acrc, i2c0/1, wkup, ccm, gpc, src */
+#define CONFIG_SYS_CLKCTL_CCGR4 0x33f0f003
+#define CONFIG_SYS_CLKCTL_CCGR5 0xFFFFFFFF
+/* ocotp, snvs, wdog_snvs, ddrmc */
+#define CONFIG_SYS_CLKCTL_CCGR6 0x3003cc00
+/* usb1, sdhc0/1 */
+#define CONFIG_SYS_CLKCTL_CCGR7 0x0000033c
+/* qspi1 */
+#define CONFIG_SYS_CLKCTL_CCGR8 0x00000300
+/* enet0/1 */
+#define CONFIG_SYS_CLKCTL_CCGR9 0x0000000f
+/* nfc */
+#define CONFIG_SYS_CLKCTL_CCGR10 0x00000003
+/* caam */
+#define CONFIG_SYS_CLKCTL_CCGR11 0x00000003
+
+#define CONFIG_SYS_CLKCTRL_CCR 0x00010005
+#define CONFIG_SYS_CLKCTRL_CCSR 0x0003FF64
+#define CONFIG_SYS_CLKCTRL_CACRR 0x00000810
+#define CONFIG_SYS_CLKCTRL_CSCMR1 0x03CA0000
+#define CONFIG_SYS_CLKCTRL_CSCDR1 0x01000000
+#define CONFIG_SYS_CLKCTRL_CSCDR2 0x30114240
+#define CONFIG_SYS_CLKCTRL_CSCDR3 0x00003F1F
+#define CONFIG_SYS_CLKCTRL_CSCMR2 0x00000000
+#define CONFIG_SYS_CLKCTRL_CSCDR4 0x00000000
+#define CONFIG_SYS_CLKCTRL_CLPCR 0x00000078
+
+#define CONFIG_SYS_ANADIG_USB1_CTRL 0x00012000
+#define CONFIG_SYS_ANADIG_USB2_CTRL 0x00012000
+#define CONFIG_SYS_ANADIG_528_CTRL 0x00002001
+#define CONFIG_SYS_ANADIG_528_SS 0x00000000
+#define CONFIG_SYS_ANADIG_528_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_528_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_VID_CTRL 0x00011028
+#define CONFIG_SYS_ANADIG_VID_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_VID_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_ENET_CTRL 0x00011001
+#define CONFIG_SYS_ANADIG_PFD_USB1 0x1B1D1A1C
+#define CONFIG_SYS_ANADIG_PFD_528 0x171C1813
+#define CONFIG_SYS_ANADIG_USB1_MISC 0x00000002
+#define CONFIG_SYS_ANADIG_USB2_VBUS 0x00100004
+#define CONFIG_SYS_ANADIG_USB2_CHRG 0x00000000
+#define CONFIG_SYS_ANADIG_USB2_MISC 0x00000002
+#define CONFIG_SYS_ANADIG_SYS_CTRL 0x00002001
+#define CONFIG_SYS_ANADIG_SYS_SS 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_SYS_PFD_528 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_PLL_LOCK 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#endif
diff --git a/include/configs/vybrid_iram.h b/include/configs/vybrid_iram.h
new file mode 100644
index 0000000..f88050e
--- /dev/null
+++ b/include/configs/vybrid_iram.h
@@ -0,0 +1,284 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the vybrid Board
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+
+#define CONFIG_VYBRID
+
+#define CONFIG_SYS_VYBRID_HCLK 24000000
+#define CONFIG_SYS_VYBRID_CLK32 32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_IPG
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_SYS_UBOOT_IN_GPURAM
+
+#include <asm/arch/vybrid-regs.h>
+
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#undef CONFIG_SETUP_MEMORY_TAGS
+#undef CONFIG_INITRD_TAG
+
+#undef CONFIG_OF_LIBFDT
+
+#define CONFIG_MACH_TYPE MACH_TYPE_VYBRID_VF6XX
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 << 10)
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Hardware drivers */
+#define CONFIG_VYBRID_UART
+#define CONFIG_VYBRID_UART_BASE UART0_BASE
+#define CONFIG_VYBRID_GPIO
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_UART_PORT (1)
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PING
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADB /* loadb */
+#undef CONFIG_CMD_LOADS /* loads */
+
+#define CONFIG_SYS_TEXT_BASE 0x3f000800
+
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_SYS_ESDHC1_BASE ESDHC2_BASE_ADDR
+#define CONFIG_SYS_ESDHC2_BASE ESDHC2_BASE_ADDR
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * NAND FLASH
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_JFFS2_NAND
+#define CONFIG_NAND_FSL_NFC
+#define CONFIG_SYS_NAND_BASE 0x400E0000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+#define CONFIG_QUAD_SPI
+
+/* Network configuration */
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_MII 1
+# define CONFIG_MII_INIT 1
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC1_PINMUX 0
+# define CONFIG_SYS_FEC0_IOBASE MACNET0_BASE_ADDR
+# define CONFIG_SYS_FEC1_IOBASE MACNET1_BASE_ADDR
+# define CONFIG_SYS_FEC0_MIIBASE MACNET0_BASE_ADDR
+# define CONFIG_SYS_FEC1_MIIBASE MACNET0_BASE_ADDR
+# define MCFFEC_TOUT_LOOP 50000
+# undef CONFIG_HAS_ETH1
+
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
+# define CONFIG_ETHPRIME "FEC0"
+# define CONFIG_IPADDR 10.81.67.175
+# define CONFIG_NETMASK 255.255.252.0
+# define CONFIG_SERVERIP 10.81.64.153
+# define CONFIG_GATEWAYIP 10.81.67.254
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_LOADADDR 0x3f400000 /* loadaddr env var */
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Vybrid U-Boot > "
+#undef CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x3f400000
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+#undef CONFIG_CMDLINE_EDITING
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE (0x3f400000)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* timer */
+#define FTM_BASE_ADDR FTM0_BASE_ADDR
+#define CONFIG_TMR_USEPIT
+
+/* clock/PLL configuration */
+/* uart0-2 */
+#define CONFIG_SYS_CLKCTL_CCGR0 0x000FC000
+/* crc, pit, ftm0/1, a5/m4 wdog */
+#define CONFIG_SYS_CLKCTL_CCGR1 0xF00FC0C0
+/* lptmr, qspi0, iomuxc, gpio */
+#define CONFIG_SYS_CLKCTL_CCGR2 0x0FFF0303
+/* anadig, scscm*/
+#define CONFIG_SYS_CLKCTL_CCGR3 0x00000033
+/* acrc, i2c0/1, wkup, ccm, gpc, src */
+#define CONFIG_SYS_CLKCTL_CCGR4 0x33f0f003
+#define CONFIG_SYS_CLKCTL_CCGR5 0xFFFFFFFF
+/* ocotp, snvs, wdog_snvs, ddrmc */
+#define CONFIG_SYS_CLKCTL_CCGR6 0x3003cc00
+/* usb1, sdhc0/1 */
+#define CONFIG_SYS_CLKCTL_CCGR7 0x0000033c
+/* qspi1 */
+#define CONFIG_SYS_CLKCTL_CCGR8 0x00000300
+/* enet0/1 */
+#define CONFIG_SYS_CLKCTL_CCGR9 0x0000000f
+/* nfc */
+#define CONFIG_SYS_CLKCTL_CCGR10 0x00000003
+/* caam */
+#define CONFIG_SYS_CLKCTL_CCGR11 0x00000003
+
+#define CONFIG_SYS_CLKCTRL_CCR 0x00010005
+#define CONFIG_SYS_CLKCTRL_CCSR 0x0003FF64
+#define CONFIG_SYS_CLKCTRL_CACRR 0x00000810
+#define CONFIG_SYS_CLKCTRL_CSCMR1 0x03CA0000
+#define CONFIG_SYS_CLKCTRL_CSCDR1 0x01000000
+#define CONFIG_SYS_CLKCTRL_CSCDR2 0x30114240
+#define CONFIG_SYS_CLKCTRL_CSCDR3 0x00003F1F
+#define CONFIG_SYS_CLKCTRL_CSCMR2 0x00000000
+#define CONFIG_SYS_CLKCTRL_CSCDR4 0x00000000
+#define CONFIG_SYS_CLKCTRL_CLPCR 0x00000078
+
+#define CONFIG_SYS_ANADIG_USB1_CTRL 0x00012000
+#define CONFIG_SYS_ANADIG_USB2_CTRL 0x00012000
+#define CONFIG_SYS_ANADIG_528_CTRL 0x00002001
+#define CONFIG_SYS_ANADIG_528_SS 0x00000000
+#define CONFIG_SYS_ANADIG_528_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_528_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_VID_CTRL 0x00011028
+#define CONFIG_SYS_ANADIG_VID_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_VID_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_ENET_CTRL 0x00011001
+#define CONFIG_SYS_ANADIG_PFD_USB1 0x1B1D1A1C
+#define CONFIG_SYS_ANADIG_PFD_528 0x171C1813
+#define CONFIG_SYS_ANADIG_USB1_MISC 0x00000002
+#define CONFIG_SYS_ANADIG_USB2_VBUS 0x00100004
+#define CONFIG_SYS_ANADIG_USB2_CHRG 0x00000000
+#define CONFIG_SYS_ANADIG_USB2_MISC 0x00000002
+#define CONFIG_SYS_ANADIG_SYS_CTRL 0x00002001
+#define CONFIG_SYS_ANADIG_SYS_SS 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_NUM 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_DENOM 0x00000012
+#define CONFIG_SYS_ANADIG_SYS_PFD_528 0x00000000
+#define CONFIG_SYS_ANADIG_SYS_PLL_LOCK 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#undef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#endif
--
1.8.0
More information about the U-Boot
mailing list