[U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Tom Rini
trini at ti.com
Tue Apr 9 17:39:36 CEST 2013
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 04/09/2013 10:52 AM, Peter Korsgaard wrote:
>>>>>> "Tom" == Tom Rini <trini at ti.com> writes:
>
> Tom> In the case of booting from certain peripherals, such as UART,
> we must Tom> not see what the device descriptor says for RAW or FAT
> mode because in Tom> addition to being nonsensical, it leads to a
> hang. This is why we have Tom> a test currently for the boot mode
> being within range. The problem Tom> however is that on some
> platforms we get MMC2_2 as the boot mode and not Tom> the defined
> value for MMC2, and in others we get the value for MMC2_2. Tom>
> This is required to fix eMMC booting on omap5_uevm.
>
> Tom> Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD
> on Tom> classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC).
>
> Tom> Signed-off-by: Tom Rini <trini at ti.com> Tom> --- Tom>
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +++++++---
> Tom> arch/arm/include/asm/arch-am33xx/spl.h | 3 +++
> Tom> arch/arm/include/asm/arch-omap3/spl.h | 3 +++
> Tom> arch/arm/include/asm/arch-omap4/spl.h | 2 ++ Tom>
> arch/arm/include/asm/arch-omap5/spl.h | 2 ++ Tom> 5
> files changed, 17 insertions(+), 3 deletions(-)
>
> Tom> diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> index
> b933fe8..90b3c8a 100644 Tom> ---
> a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> +++
> b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> @@ -60,10
> +60,14 @@ ENTRY(save_boot_params) Tom> ldr r3, =boot_params Tom>
> strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1
>
> Tom> - /* boot mode is passed only for devices that can raw/fat
> mode */ Tom> - cmp r2, #BOOT_DEVICE_XIP Tom> + /* Tom> + * boot
> mode is only valid for device that can be raw or FAT booted. Tom> +
> * in other cases it may be fatal to look. While platforms differ
> Tom> + * in the values used for each MMC slot, they are
> contiguous. Tom> + */ Tom> + cmp r2, #MMC_BOOT_DEVICES_START Tom>
> blt 2f Tom> - cmp r2, #BOOT_DEVICE_MMC2 Tom> + cmp r2,
> #MMC_BOOT_DEVICES_END Tom> bgt 2f Tom> /* Store the boot mode
> (raw/FAT) in omap_bootmode */ Tom> ldr r2, [r0,
> #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr Tom> diff
> --git a/arch/arm/include/asm/arch-am33xx/spl.h
> b/arch/arm/include/asm/arch-am33xx/spl.h Tom> index
> f60b086..14a2c7c 100644 Tom> ---
> a/arch/arm/include/asm/arch-am33xx/spl.h Tom> +++
> b/arch/arm/include/asm/arch-am33xx/spl.h Tom> @@ -37,4 +37,7 @@
> Tom> #define BOOT_DEVICE_USBETH 68 Tom> #define
> BOOT_DEVICE_CPGMAC 70 Tom> #define BOOT_DEVICE_MMC2_2 0xFF
> Tom> + Tom> +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 Tom>
> +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
>
> Doesn't this break ti814x with the funky inverted mmc1/mmc2?
That's probably true, dang. I knew OMAP3 also had them swapped,
number-wise but didn't recall until you said this that it doesn't use
that code at all. I'll V2 this part. Thanks!
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQIcBAEBAgAGBQJRZDY4AAoJENk4IS6UOR1WUBoP/1wPoJ5C0ZCSpEDmm7YFs5b2
XaafK0dIJ/aw7K264vYY8tHBj/ku6mbgNOvfRUL9rxGAPPStESMQynkwF/H7llbd
7GkFlsWpLAgotPnCSwHGqQnApCeUeu0BGCAGvaB8NK0uFlU+D0bsWBdgRe/sML+m
LjF0/2eQmm2rTo8ifkDTvCdldaeyGqUo0amefEvfW2cLMxPlYGWcfPh/MW1X35ib
RnnBUhdVM38XPKmktjSQMQ4IBkLnd2Hu64KFkZl3ejyMPDjr/uOkm+1UawL34IPH
wgSC5Y1+w7HvnxM+D3pre4yrpRSYq+dcg3m9CLb7HcrGFCjLxtTEEcy6DOCF3RG0
aK62JQ0itrXcGCnwMYO6t/w7JlNj/flqCTQW4qU4HJ/ixaICRrg30IePqqcJ0Rj0
69EA4BjgR8JhRZOWRuCkwirz0LQpg7DY43Ioax7EmZ6qjve7/ryEnPxdfSEWTPgr
ZcqhsYCwoc0wkADW894UveUW49qXhQCBR0C1eXbynfbpdWSu0ObHX4ErAH1JP4x/
ihtuMZAoTcpYTM0b/Fg+A9t45QhIZBMRKLWar4h5zFrMGyfIODPUjXLqJRSI6Lef
kTcUZY9Fy837Vok1NlllTMFxGd8Ot5mRgDehvZiZlTjzbRUfPdC212NUQQ/px7C8
7KPGRHhQds5Fsur7bnXJ
=2NME
-----END PGP SIGNATURE-----
More information about the U-Boot
mailing list