[U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop

[Stefano Babic]

On 14/04/2013 09:19, Dirk Behme wrote:
> Am 08.04.2013 11:06, schrieb Andrew Gabbasov:
>> Rework the waiting for transfer completion loop condition
>> to continue waiting until both Transfer Complete and DMA End
>> interrupts occur. Checking of DLA bit in Present State register
>> looks not needed in addition to interrupts status checking,
>> so it can be removed from the condition. Also, DMA Error
>> condition is added to the list of data errors, checked in the loop.
>>
>> Signed-off-by: Andrew Gabbasov <andrew_gabbasov at mentor.com>
>> ---
>>   drivers/mmc/fsl_esdhc.c |    3 +--
>>   include/fsl_esdhc.h     |    4 +++-
>>   2 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index 54b5363..814bba4 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -400,8 +400,7 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd
>> *cmd, struct mmc_data *data)
>>
>>               if (irqstat & DATA_ERR)
>>                   return COMM_ERR;
>> -        } while (!(irqstat & IRQSTAT_TC) &&
>> -                (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA));
>> +        } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
>>   #endif
>>       }
>>
>> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
>> index 47d2fe4..ea0880b 100644
>> --- a/include/fsl_esdhc.h
>> +++ b/include/fsl_esdhc.h
>> @@ -63,7 +63,9 @@
>>   #define IRQSTAT_CC        (0x00000001)
>>
>>   #define CMD_ERR        (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
>> -#define DATA_ERR    (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE)
>> +#define DATA_ERR    (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
>> +                IRQSTAT_DMAE)
>> +#define DATA_COMPLETE    (IRQSTAT_TC | IRQSTAT_DINT)
>>
>>   #define IRQSTATEN        0x0002e034
>>   #define IRQSTATEN_DMAE        (0x10000000)
> 
> I can't say anything to the content of the patches ;)
> 
> But are this patch and the patch from Eric
> 
> http://patchwork.ozlabs.org/patch/233595/
> 
> fine and should be applied together, now?

I see the same. I apply both on u-boot-imx and send an update pull
request to Albert.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================