[U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board

[Dirk Behme]

Am 06.04.2013 02:55, schrieb Fabio Estevam:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> mx6slevk board is a development board from Freescale based on the mx6 solo-lite
> processor.
>
> For details about mx6slevk, please refer to:
> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---

> diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg
> new file mode 100644
> index 0000000..df39a16
> --- /dev/null
> +++ b/board/freescale/mx6slevk/imximage.cfg
> @@ -0,0 +1,118 @@
> +/*
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License or (at your option) any later version.
> + *
> + * Refer docs/README.imxmage for more details about how-to configure
> + * and create imximage boot image
> + *
> + * The syntax is taken as close as possible with the kwbimage
> + */
> +
> +/* image version */
> +
> +IMAGE_VERSION 2
> +
> +/*
> + * Boot Device : one of
> + * spi, sd (the board has no nand neither onenand)
> + */
> +
> +BOOT_FROM	sd
> +
> +/*
> + * Device Configuration Data (DCD)
> + *
> + * Each entry must have the format:
> + * Addr-type           Address        Value
> + *
> + * where:
> + *	Addr-type register length (1,2 or 4 bytes)
> + *	Address	  absolute address of the register
> + *	value	  value to be stored in the register
> + */
> +DATA 4 0x020c4018 0x00260324
> +
> +DATA 4 0x020c4068 0xffffffff
> +DATA 4 0x020c406c 0xffffffff
> +DATA 4 0x020c4070 0xffffffff
> +DATA 4 0x020c4074 0xffffffff
> +DATA 4 0x020c4078 0xffffffff
> +DATA 4 0x020c407c 0xffffffff
> +DATA 4 0x020c4080 0xffffffff

Again this default stuff? ;)

Best regards

Dirk