[U-Boot] [PATCH 1/2] mmc: atmel_mci: using IP version for different setting
Bo Shen
voice.shen at atmel.com
Fri Apr 26 12:27:06 CEST 2013
Using IP version for different setting
- Higher version supports 8bit mode
- Higher version bus width setting is different
Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
drivers/mmc/gen_atmel_mci.c | 42 ++++++++++++++++++++++++++++++++++++++----
include/atmel_mci.h | 2 ++
2 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 70a9f91..fc0a181 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -50,6 +50,12 @@
static int initialized = 0;
+/* Read Atmel MCI IP version */
+static unsigned int atmel_mci_get_version(struct atmel_mci *mci)
+{
+ return readl(&mci->version) & 0x00000fff;
+}
+
/*
* Print command and status:
*
@@ -297,7 +303,9 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
static void mci_set_ios(struct mmc *mmc)
{
atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
- int busw = (mmc->bus_width == 4) ? 1 : 0;
+ int bus_width = mmc->bus_width;
+ unsigned int version = atmel_mci_get_version(mci);
+ int busw;
/* Set the clock speed */
mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);
@@ -305,9 +313,26 @@ static void mci_set_ios(struct mmc *mmc)
/*
* set the bus width and select slot for this interface
* there is no capability for multiple slots on the same interface yet
- * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
*/
- writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ if ((version & 0xf00) >= 0x300) {
+ switch (bus_width) {
+ case 8:
+ busw = 3;
+ break;
+ case 4:
+ busw = 2;
+ break;
+ default:
+ busw = 0;
+ break;
+ }
+
+ writel(busw << 6 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ } else {
+ busw = (bus_width == 4) ? 1 : 0;
+
+ writel(busw << 7 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ }
}
/* Entered into mmc structure during driver init */
@@ -340,9 +365,12 @@ static int mci_init(struct mmc *mmc)
int atmel_mci_init(void *regs)
{
struct mmc *mmc = malloc(sizeof(struct mmc));
+ struct atmel_mci *mci;
+ unsigned int version;
if (!mmc)
return -1;
+
strcpy(mmc->name, "mci");
mmc->priv = regs;
mmc->send_cmd = mci_send_cmd;
@@ -353,7 +381,13 @@ int atmel_mci_init(void *regs)
/* need to be able to pass these in on a board by board basis */
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->host_caps = MMC_MODE_4BIT;
+ mci = (struct atmel_mci *)mmc->priv;
+ version = atmel_mci_get_version(mci);
+ if ((version & 0xf00) >= 0x300)
+ mmc->host_caps = MMC_MODE_8BIT;
+
+ mmc->host_caps |= MMC_MODE_4BIT;
+
/*
* min and max frequencies determined by
* max and min of clock divider
diff --git a/include/atmel_mci.h b/include/atmel_mci.h
index c711881..31c4569 100644
--- a/include/atmel_mci.h
+++ b/include/atmel_mci.h
@@ -52,6 +52,8 @@ typedef struct atmel_mci {
u32 ier; /* 0x44 */
u32 idr; /* 0x48 */
u32 imr; /* 0x4c */
+ u32 reserved[43];
+ u32 version;
} atmel_mci_t;
#endif /* __ASSEMBLY__ */
--
1.7.9.5
More information about the U-Boot
mailing list