[U-Boot] [PATCH 1/4] driver:usb:s3c_udc: add support for Exynos4x12
Piotr Wilczek
p.wilczek at samsung.com
Wed Apr 10 14:07:50 CEST 2013
This patch add new defines for usb phy for Exynos4x12.
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
CC: Minkyu Kang <mk7.kang at samsung.com>
---
drivers/usb/gadget/regs-otg.h | 5 +++++
drivers/usb/gadget/s3c_udc_otg.c | 9 +++++++--
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h
index 3737e45..df7cda6 100644
--- a/drivers/usb/gadget/regs-otg.h
+++ b/drivers/usb/gadget/regs-otg.h
@@ -229,6 +229,11 @@ struct s3c_usbotg_reg {
#define CLK_SEL_12MHZ (0x2 << 0)
#define CLK_SEL_48MHZ (0x0 << 0)
+#define EXYNOS4X12_ID_PULLUP0 (0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0 (0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ (0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ (0x05 << 0)
+
/* Device Configuration Register DCFG */
#define DEV_SPEED_HIGH_SPEED_20 (0x0 << 0)
#define DEV_SPEED_FULL_SPEED_20 (0x1 << 0)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index f9d24e3..fb72662 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -180,8 +180,13 @@ void otg_phy_init(struct s3c_udc *dev)
writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
&~FORCE_SUSPEND_0), &phy->phypwr);
- writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
- CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+ if (proid_is_exynos4412())
+ writel((readl(&phy->phyclk) &~(EXYNOS4X12_ID_PULLUP0 |
+ EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+ &phy->phyclk); /* PLL 24Mhz */
+ else
+ writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
+ CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
| PHY_SW_RST0, &phy->rstcon);
--
1.7.9.5
More information about the U-Boot
mailing list