[U-Boot] [PATCH] nitrogen6x: Setup CCM_CCOSR register

Stefano Babic sbabic at denx.de
Thu Apr 25 21:16:24 CEST 2013


On 18/04/2013 01:09, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> CKO1 drives sgtl5000 codec clock on nitrogen boards and wandboard.
> 
> Doing this setup in the bootloader will allow us to remove a lot of code in 
> arch/arm/mach-imx/mach-imx6q.c from the mainline kernel.
> 
> Also, according to Eric Nelson: "enabling the clock <in the bootloader> will 
> remove squeal after an ungraceful reboot (watchdog) if hooked up to speakers."
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---


Applied to u-boot-imx, -next branch, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list