[U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Stefano Babic
sbabic at denx.de
Thu Apr 25 21:15:01 CEST 2013
On 17/04/2013 20:33, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.
>
> CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the
> bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c
> from the mainline kernel.
>
> mx6q_4x_mt41j128.cfg is also used by mx6qsabresd, and it is safe to use it for
> this board as well.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list