[U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL

Fabio Estevam festevam at gmail.com
Tue Apr 9 14:30:07 CEST 2013


Hi Benoît,

On Mon, Apr 8, 2013 at 3:55 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Benoît,
>
> On Mon, Apr 8, 2013 at 3:47 PM, Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
>
>> Did you have a chance to perform this test?
>
> I have built v10 bundle and will have access to my mx31pdk tomorrow morning.
>
> Will let you know the results.

Just tested v10 on mx31pdk.

As reported in v9 I start to get reboots and never reach the prompt.

Then I disabled watchdog options in mx31pdk.h and I get the following:

U-Boot 2013.04-rc1-14135-gab21c72-dirty (Apr 09 2013 - 09:23:01)

CPU:   Freescale i.MX31 rev 2.0 at 532 MHz.
Reset cause: POR
Board: MX31PDK
DRAM:  128 MiB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:

(Board hangs here).

When I tested v9 and removed watchdog support I was able to get into
the U-boot prompt.

Regards,

Fabio Estevam


More information about the U-Boot mailing list