[U-Boot] [PATCH V9 8/9] SMDK5250: Enable EMMC booting
amar_g
amarendra.xt at samsung.com
Sat Apr 27 08:12:59 CEST 2013
From: Amar <amarendra.xt at samsung.com>
This patch adds support for EMMC booting on SMDK5250.
Signed-off-by: Amar <amarendra.xt at samsung.com>
---
Changes since V1:
1)Updated spl_boot.c file to maintain irom pointer table
instead of using the #define values defined in header file.
Changes since V2:
1)Updation of commit message and resubmition of proper patch set.
Changes since V3:
No change.
Changes since V4:
1)The function get_irom_func(int index) has been added to avoid
type casting at many places.
2)The changes to file arch/arm/include/asm/arch-exynos/clk.h are
included in this patch file.
Changes since V5:
No change.
Changes since V6:
No change.
Changes since V7:
1)The macros FSYS1_MMC0_DIV_MASK and FSYS1_MMC0_DIV_VAL are made
local to file clock_init.c.
Changes since V8:
1)Rebased.
2)Updated USB boot piece of code, to use get_irom_func(int index)
to avoid type casting.
---
board/samsung/smdk5250/clock_init.c | 18 ++++++++++
board/samsung/smdk5250/clock_init.h | 5 +++
board/samsung/smdk5250/spl_boot.c | 64 +++++++++++++++++++++++++++-------
3 files changed, 74 insertions(+), 13 deletions(-)
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
index 5b9e82f..b288e66 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/board/samsung/smdk5250/clock_init.c
@@ -28,10 +28,14 @@
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
#include "clock_init.h"
#include "setup.h"
+#define FSYS1_MMC0_DIV_MASK 0xff0f
+#define FSYS1_MMC0_DIV_VAL 0x0701
+
DECLARE_GLOBAL_DATA_PTR;
struct arm_clk_ratios arm_clk_ratios[] = {
@@ -664,3 +668,17 @@ void clock_init_dp_clock(void)
/* We run DP at 267 Mhz */
setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
}
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+ struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ unsigned int div_mmc;
+
+ div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+ div_mmc |= FSYS1_MMC0_DIV_VAL;
+ writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h
index f751bcb..20a1d47 100644
--- a/board/samsung/smdk5250/clock_init.h
+++ b/board/samsung/smdk5250/clock_init.h
@@ -146,4 +146,9 @@ struct mem_timings *clock_get_mem_timings(void);
* Initialize clock for the device
*/
void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
#endif
diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c
index c0bcf46..98f2286 100644
--- a/board/samsung/smdk5250/spl_boot.c
+++ b/board/samsung/smdk5250/spl_boot.c
@@ -23,16 +23,44 @@
#include<common.h>
#include<config.h>
+#include <asm/arch-exynos/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+
+#include "clock_init.h"
+
+/* Index into irom ptr table */
+enum index {
+ MMC_INDEX,
+ EMMC44_INDEX,
+ EMMC44_END_INDEX,
+ SPI_INDEX,
+ USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+ [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */
+ [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/
+ [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+ -EMMC4.4 end boot operation */
+ [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */
+ [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
+ };
+
enum boot_mode {
BOOT_MODE_MMC = 4,
BOOT_MODE_SERIAL = 20,
+ BOOT_MODE_EMMC = 8, /* EMMC4.4 */
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
BOOT_MODE_USB, /* Boot using USB download */
};
- typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
- typedef u32 (*usb_copy_func_t)(void);
+void *get_irom_func(int index)
+{
+ return (void *)*(u32 *)irom_ptr_table[index];
+}
/*
* Set/clear program flow prediction and return the previous state.
@@ -55,13 +83,15 @@ static int config_branch_prediction(int set_cr_z)
*/
void copy_uboot_to_ram(void)
{
- spi_copy_func_t spi_copy;
- usb_copy_func_t usb_copy;
-
int is_cr_z_set;
unsigned int sec_boot_check;
enum boot_mode bootmode = BOOT_MODE_OM;
- u32 (*copy_bl2)(u32, u32, u32);
+
+ u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
+ u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
+ u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+ void (*end_bootop_from_emmc)(void);
+ u32 (*usb_copy)(void);
/* Read iRAM location to check for secondary USB boot mode */
sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
@@ -73,14 +103,24 @@ void copy_uboot_to_ram(void)
switch (bootmode) {
case BOOT_MODE_SERIAL:
- spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
+ spi_copy = get_irom_func(SPI_INDEX);
spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
- CONFIG_SYS_TEXT_BASE);
+ CONFIG_SYS_TEXT_BASE);
break;
case BOOT_MODE_MMC:
- copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+ copy_bl2 = get_irom_func(MMC_INDEX);
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
- CONFIG_SYS_TEXT_BASE);
+ CONFIG_SYS_TEXT_BASE);
+ break;
+ case BOOT_MODE_EMMC:
+ /* Set the FSYS1 clock divisor value for EMMC boot */
+ emmc_boot_clk_div_set();
+
+ copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+ end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+ copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+ end_bootop_from_emmc();
break;
case BOOT_MODE_USB:
/*
@@ -88,8 +128,7 @@ void copy_uboot_to_ram(void)
* before copy from USB device to RAM
*/
is_cr_z_set = config_branch_prediction(0);
- usb_copy = *(usb_copy_func_t *)
- EXYNOS_COPY_USB_FNPTR_ADDR;
+ usb_copy = get_irom_func(USB_INDEX);
usb_copy();
config_branch_prediction(is_cr_z_set);
break;
@@ -117,5 +156,4 @@ void board_init_r(gd_t *id, ulong dest_addr)
while (1)
;
}
-
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
--
1.7.3.rc2
More information about the U-Boot
mailing list