[U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks

Sricharan R r.sricharan at ti.com
Mon Apr 8 08:09:31 CEST 2013


On Thursday 04 April 2013 09:22 PM, Lubomir Popov wrote:
> V2 fixes line wrap issue of the patch itself.
> 
> I2C5 is used on all known OMAP5 hardware platforms, therefore enable.
> 
> Signed-off-by: Lubomir Popov <lpopov at mm-sol.com>
> 
> ---
>  arch/arm/cpu/armv7/omap5/hw_data.c |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
> index e5e41fd..5698876 100644
> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
> @@ -412,6 +412,7 @@ void enable_basic_uboot_clocks(void)
>  		(*prcm)->cm_l4per_i2c2_clkctrl,
>  		(*prcm)->cm_l4per_i2c3_clkctrl,
>  		(*prcm)->cm_l4per_i2c4_clkctrl,
> +		(*prcm)->cm_l4per_i2c5_clkctrl,

This is fine.
Can you also mention what device is connected on them ? and
how you are using it ?

Also can you add these in a series.

Regards,
 Sricharan



More information about the U-Boot mailing list