[U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND

Prabhakar Kushwaha prabhakar at freescale.com
Fri Apr 12 05:32:50 CEST 2013


On 04/12/2013 01:12 AM, Scott Wood wrote:
> On 04/11/2013 02:25:09 AM, Prabhakar Kushwaha wrote:
>> Linker script is not able find start.o binary. So add its absolute 
>> path in
>> u-boot-spl.lds. This change is similar to u-boot-nand.lds
>>
>> common/Makefile: Avoid compiling unnecssary files
>>
>> fsl_ifc_spl.c : It is is responsible for reading u-boot binary from
>> NAND flash and copying into DDR. It also transfer cotrol from NAND SPL
>> to u-boot image present in DDR.
>>
>> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
>> ---
>>  Based upon git://git.denx.de/u-boot.git branch master
>>
>>  Changes for v2: Sending as it is
>>  Changes for v3: Fix tools/checkpatch errors
>>
>>  arch/powerpc/cpu/mpc85xx/u-boot-spl.lds |    2 +-
>>  board/freescale/common/Makefile         |   10 ++
>>  drivers/mtd/nand/Makefile               |    1 +
>>  drivers/mtd/nand/fsl_ifc_spl.c          |  258 
>> +++++++++++++++++++++++++++++++
>>  4 files changed, 270 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/mtd/nand/fsl_ifc_spl.c
>
> Did you use -C in git format-patch?  I'd expect fsl_ifc_spl.c to be 
> recognized as a copy.

Yes Scott,
I used -C option during git format-patch.
$ git format-patch -C -M HEAD^^^^^^


Regards,
Prabhakar








More information about the U-Boot mailing list