[U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND

Scott Wood scottwood at freescale.com
Thu Apr 11 21:42:42 CEST 2013


On 04/11/2013 02:25:09 AM, Prabhakar Kushwaha wrote:
> Linker script is not able find start.o binary. So add its absolute  
> path in
> u-boot-spl.lds. This change is similar to u-boot-nand.lds
> 
> common/Makefile: Avoid compiling unnecssary files
> 
> fsl_ifc_spl.c : It is is responsible for reading u-boot binary from
> NAND flash and copying into DDR. It also transfer cotrol from NAND SPL
> to u-boot image present in DDR.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
>  Based upon git://git.denx.de/u-boot.git branch master
> 
>  Changes for v2: Sending as it is
>  Changes for v3: Fix tools/checkpatch errors
> 
>  arch/powerpc/cpu/mpc85xx/u-boot-spl.lds |    2 +-
>  board/freescale/common/Makefile         |   10 ++
>  drivers/mtd/nand/Makefile               |    1 +
>  drivers/mtd/nand/fsl_ifc_spl.c          |  258  
> +++++++++++++++++++++++++++++++
>  4 files changed, 270 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/mtd/nand/fsl_ifc_spl.c

Did you use -C in git format-patch?  I'd expect fsl_ifc_spl.c to be  
recognized as a copy.

-Scott


More information about the U-Boot mailing list