[U-Boot] Pull request: u-boot-arm/master - UPDATED
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Apr 11 08:45:30 CEST 2013
Hi Tom,
On Thu, 11 Apr 2013 01:12:17 +0200, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
The following changes since commit
009d75ccc11d27b9a083375a88bb93cb746b4800:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
18:50:01 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to abbecf4c873aa3e9ec9331c5b3eba1e2a9c84902:
ARM: Fix __bss_start and __bss_end in linker scripts (2013-04-11
08:10:59 +0200)
*** NOTE *** there should be a single, and trivial, merge conflict on
file drivers/video/exynos_fb.c.
----------------------------------------------------------------
Abbas Raza (1):
mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
board
Ajay Kumar (13):
video: exynos_fb: Remove callbacks from the driver
video: exynos_dp: Remove callbacks from the driver
video: exynos_fb: Make fimd_ctrl global
EXYNOS: FDT: Add compatible strings for FIMD
video: exynos_fb: add DT support for FIMD driver
EXYNOS5: Add device node for FIMD
SMDK5250: Add device node for FIMD
video: exynos_dp: Make dp_regs global
EXYNOS5: FDT: Add compatible strings for FIMD
video: exynos_dp: Add function to parse DP DT node
EXYNOS5: Add device node for DP
SMDK5250: Add device node for DP
SMDK5250: Use statically defined structures only in non DT case
Akshay Saraswat (8):
Exynos: clock: Fix a bug in PLL lock check condition
Exynos: Add hardware accelerated SHA256 and SHA1
Exynos: config: Enable ACE HW for SHA 256 for Exynos
gen: Add sha h/w acceleration to hash
Exynos: config: Enable hash command
Exynos5: clock: Fix a typo bug in exynos clock init
Exynos5: config: enable time command
Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
Albert ARIBAUD (8):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
ARM: fix CONFIG_SPL_MAX_SIZE semantics
ARM: Fix __bss_start and __bss_end in linker scripts
Alexandre Pereira da Silva (1):
mx23_olinuxino: Fix netboot console
Andreas Bießmann (6):
omap3/cpu.h: add BCH support
asm/omap_gpmc.h: consolidate common defines
omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
omap_gpmc: change nandecc command
omap_gpmc: add support for hw assisted BCH8
tricorder: enable hw assisted BCH8 in SPL and u-boot
Benoît Thébaudeau (29):
mx25pdk: Enable imxdi RTC
nand: mxc: Prepare to add support for i.MX5
nand: mxc: Add support for i.MX5
imx: mx5: lowlevel_init: Simplify code
imx: mx53ard: Add support for NAND Flash
nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
nand: mxc: Use appropriate page number in syndrome functions
arm: start.S: Fix _TEXT_BASE for SPL
arm: relocate_code() is no longer noreturn
arm1136: Remove redundant relocate_code() return
arm: relocate_code(): Remove useless relocation offset computation
arm: relocate_code(): Use __image_copy_end for end of relocation
arm: crt0.S: Remove bogus .globl
autoconfig.mk: Make it possible to define configs from other
configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
imx: Fix automatic make targets for imx images
nand: mxc: Switch NAND SPL to generic SPL
arm926ejs: Remove deprecated and now unused NAND SPL
arm: Remove unused relocate_code() parameters
Makefile: Move SHELL setup to config.mk
.gitignore: Add /SPL
imx: Add u-boot-with-spl.imx make target
imx: Add u-boot-with-nand-spl.imx make target
arm: Remove support for smdk6400
Revert "mkconfig: start deprecating Makefile config targets"
arm: Remove support for unused s3c64xx
arm: Remove deprecated and now unused NAND SPL
arm1176: Remove unused MMU setup from start.S
arm: Make all linker scripts compatible with per-symbol sections
Bin Liu (2):
musb: am335x: disable bulk split-combine feature
musb: set MUSB speed based on CONFIG
Che-Liang Chiou (1):
Exynos: Add timer_get_us function
Dirk Behme (1):
spi: mxc_spi: Fix ECSPI reset handling
Eric Nelson (2):
i.MX6: Add hdmidet command to detect attached HDMI monitor
i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
Fabio Estevam (13):
mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
configs: mx28evk: Use single-line comments
mx28evk: Disable CONFIG_CMD_I2C
Add initial support for Wandboard dual lite and solo.
mx28evk: Introduce a new target for saving env vars to NAND
mx6qsabrelite: README: No need to pass 'u-boot.imx'
mx6: Fix get_board_rev() for the mx6 solo case
wandboard: Remove duplicate 'mmc dev'
mx6qsabrelite: Remove duplicate 'mmc dev'
wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
mtd: nand: mxc_nand: Fix is_16bit_nand()
mx31pdk: Remove watchdog support
Gabe Black (3):
Exynos: pwm: Fix two bugs in the exynos pwm configuration code
Exynos: Avoid a divide by zero by specifying a non-zero period
for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
driver
Hunter, Jon (4):
omap2420-h4: Fix DRAM initialisation
omap2420-h4: Fix booting from NOR flash
omap2420-h4: Add device tree support
omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
Javier Martinez Canillas (1):
i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
command
Jon Hunter (5):
omap5912-osk: Fix DRAM initialisation
omap5912-osk: Fix booting from NOR flash
omap5912-osk: Fix device initialisation
omap5912-osk: Increase flash partition for u-boot
omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
Josh Wu (1):
logo: update to the new logo for ATMEL
Knut Wohlrab (1):
imx-common: timer: fix 32-bit overflow
Lars Poeschel (1):
pcm051: Enable DDR PHY dynamic power down bit
Lokesh Vutla (1):
arm: omap4: Fix SDRAM AUTO DETECTION
Lubomir Popov (2):
OMAP: Fix copy-paste bug that did not enable UART4 clock
OMAP4: Fix bug in omap4460_volts struct
Manfred Huber (1):
omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Minkyu Kang (1):
exynos: change indentation of defines in cpu.h
Nishanth Menon (1):
omap5: Allow use of a plain text env file
Otavio Salvador (4):
mx6qsabresd: Document the mapping of USDHC[2-4]
mx6qsabresd: Fix card detection for invalid card id case
mx6qsabre{sd,auto}: Add boot mode select
mx23_olinuxino: Change definitions to use spaces instead of tabs
Padmavathi Venna (4):
Exynos: Add peripherial id for pwm
Exynos: clock: Add generic api to get the clk freq
Exynos: clock: Correct pwm source clk selection
Exynos: pwm: Use generic api to get pwm clk freq
Przemyslaw Marczak (1):
spl:falcon:trats: Fix SPL image size computing.
Rajeshwari Shinde (1):
EXYNOS5: Add L2 Cache Support.
SRICHARAN R (4):
ARM: OMAP5: Rename omap5_evm to omap5_uevm
ARM: OMAP5: Set fdt_high to enable booting with Device tree
ARM: OMAP4/5: Change the default boot command to work with device
tree ARM: OMAP4/5: Make bootz as the default boot command
Simon Glass (1):
Exynos: Change get_timer() to work correctly
Stephen Warren (1):
ARM: bcm2835: fix get_timer() to return ms
Tom Rini (8):
am335x: Enable MMC1 clock
doc/feature-removal-schedule.txt: Add
CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
am335x: Update timings for the beaglebone again
omap5_uevm: Correct to 2MiB aligned partitions on eMMC
Vivek Gautam (2):
SMDK5250: Fix compiler warning for non-dt systems
spi: exynos: Fix compiler warnings for non-dt systems
.gitignore | 3 +
MAINTAINERS | 5 +-
Makefile | 40 +-
README | 42 +-
arch/arm/config.mk | 2 -
arch/arm/cpu/arm1136/config.mk | 7 +
arch/arm/cpu/arm1136/omap24xx/timer.c | 8 +-
arch/arm/cpu/arm1136/start.S | 28 +-
arch/arm/cpu/arm1136/u-boot-spl.lds | 2 +-
arch/arm/cpu/arm1176/bcm2835/timer.c | 14 +-
arch/arm/cpu/arm1176/s3c64xx/config.mk | 34 -
arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---
arch/arm/cpu/arm1176/s3c64xx/init.c | 26 -
arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 -
arch/arm/cpu/arm1176/s3c64xx/speed.c | 145 ----
arch/arm/cpu/arm1176/s3c64xx/timer.c | 160 ----
arch/arm/cpu/arm1176/start.S | 127 +--
arch/arm/cpu/arm720t/start.S | 26 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 13 +-
arch/arm/cpu/arm920t/start.S | 28 +-
arch/arm/cpu/arm925t/start.S | 28 +-
arch/arm/cpu/arm926ejs/config.mk | 8 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-
arch/arm/cpu/arm926ejs/mxs/start.S | 4 +
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 +-
arch/arm/cpu/arm926ejs/omap/timer.c | 15 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 +-
arch/arm/cpu/arm926ejs/start.S | 40 +-
arch/arm/cpu/arm946es/start.S | 28 +-
arch/arm/cpu/arm_intcm/start.S | 30 +-
arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 5 +
arch/arm/cpu/armv7/am33xx/elm.c | 2 +-
arch/arm/cpu/armv7/config.mk | 6 +
arch/arm/cpu/armv7/exynos/clock.c | 167 +++-
arch/arm/cpu/armv7/exynos/soc.c | 36 +
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 8 +-
arch/arm/cpu/armv7/mx6/soc.c | 12 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 29 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +-
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 31 +-
arch/arm/cpu/armv7/omap4/emif.c | 1 -
arch/arm/cpu/armv7/omap4/hw_data.c | 8 +-
arch/arm/cpu/armv7/omap5/emif.c | 1 -
arch/arm/cpu/armv7/s5p-common/pwm.c | 42 +-
arch/arm/cpu/armv7/s5p-common/timer.c | 117 ++-
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/start.S | 26 +-
arch/arm/cpu/ixp/start.S | 28 +-
arch/arm/cpu/ixp/u-boot.lds | 16 +-
arch/arm/cpu/pxa/start.S | 26 +-
arch/arm/cpu/s3c44b0/start.S | 28 +-
arch/arm/cpu/sa1100/start.S | 28 +-
arch/arm/cpu/u-boot-spl.lds | 19 +-
arch/arm/cpu/u-boot.lds | 18 +-
arch/arm/dts/exynos5250.dtsi | 13 +
arch/arm/imx-common/Makefile | 18 +
.../arm/imx-common/cmd_hdmidet.c | 32 +-
arch/arm/imx-common/timer.c | 26 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 20 +-
arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +-
arch/arm/include/asm/arch-am33xx/spl.h | 8 +
arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +-
arch/arm/include/asm/arch-bcm2835/timer.h | 2 +
arch/arm/include/asm/arch-exynos/clk.h | 15 +
arch/arm/include/asm/arch-exynos/cpu.h | 10 +-
arch/arm/include/asm/arch-exynos/dp_info.h | 1 -
arch/arm/include/asm/arch-exynos/periph.h | 5 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 +
arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +-
arch/arm/include/asm/arch-omap3/cpu.h | 6 +
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 68 +-
arch/arm/include/asm/arch-omap3/spl.h | 3 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 1 -
arch/arm/include/asm/arch-omap4/spl.h | 2 +
arch/arm/include/asm/arch-omap5/omap.h | 1 -
arch/arm/include/asm/arch-omap5/spl.h | 2 +
arch/arm/include/asm/arch-s3c64xx/hardware.h | 63 --
arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895
--------------------
arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --
arch/arm/include/asm/emif.h | 1 -
arch/arm/include/asm/mach-types.h | 13 -
arch/arm/include/asm/omap_gpmc.h | 87 ++
arch/arm/lib/crt0.S | 52 +-
board/actux1/u-boot.lds | 17 +-
board/actux2/u-boot.lds | 17 +-
board/actux3/u-boot.lds | 17 +-
board/ait/cam_enc_4xx/u-boot-spl.lds | 4 +-
board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 4 +-
board/davinci/da8xxevm/u-boot-spl-hawk.lds | 9 +-
board/dvlhost/u-boot.lds | 17 +-
board/freescale/mx31ads/u-boot.lds | 32 +-
board/freescale/mx31pdk/Makefile | 3 +
board/freescale/mx31pdk/config.mk | 5 -
board/freescale/mx31pdk/mx31pdk.c | 8 +
board/freescale/mx53ard/mx53ard.c | 66 ++
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +
board/freescale/mx6qsabrelite/README | 4 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +-
board/freescale/mx6qsabresd/mx6qsabresd.c | 48 +-
board/isee/igep00x0/igep00x0.c | 2 +-
board/karo/tx25/Makefile | 4 +-
board/karo/tx25/config.mk | 5 -
board/karo/tx25/tx25.c | 8 +
board/overo/overo.c | 2 +-
board/phytec/pcm051/board.c | 3 +-
board/samsung/dts/exynos5250-smdk5250.dts | 40 +
board/samsung/smdk5250/clock_init.c | 22 +-
board/samsung/smdk5250/setup.h | 2 +-
board/samsung/smdk5250/smdk5250-uboot-spl.lds | 4 +-
board/samsung/smdk5250/smdk5250.c | 19 +-
board/samsung/smdk6400/.gitignore | 5 -
board/samsung/smdk6400/Makefile | 48 --
board/samsung/smdk6400/config.mk | 30 -
board/samsung/smdk6400/lowlevel_init.S | 323 -------
board/samsung/smdk6400/smdk6400.c | 134 ---
board/samsung/smdk6400/smdk6400_nand_spl.c | 37 -
board/samsung/smdk6400/u-boot-nand.lds | 86 --
board/samsung/trats/trats.c | 6 +-
board/samsung/universal_c210/universal.c | 23 +-
board/ti/am335x/board.c | 2 +-
board/ti/omap2420h4/config.mk | 4 +-
board/ti/omap2420h4/mem.c | 13 -
board/ti/omap2420h4/omap2420h4.c | 24 +-
board/ti/omap5912osk/config.mk | 12 +-
board/ti/omap5912osk/lowlevel_init.S | 20 +
board/ti/omap5912osk/omap5912osk.c | 23 +-
board/ti/{omap5_evm => omap5_uevm}/Makefile | 0
board/ti/{omap5_evm => omap5_uevm}/evm.c | 0
board/ti/{omap5_evm => omap5_uevm}/mux_data.h | 0
board/vpac270/u-boot-spl.lds | 6 +-
board/wandboard/Makefile | 29 +
board/wandboard/README | 40 +
board/wandboard/wandboard.c | 178 ++++
boards.cfg | 9 +-
common/hash.c | 18 +
config.mk | 7 +
doc/README.arm-relocation | 14 +-
doc/README.mx28evk | 18 +
doc/README.omap3 | 28 +
doc/README.scrapyard | 1 +
doc/device-tree-bindings/video/exynos-dp.txt | 69 ++
doc/device-tree-bindings/video/exynos-fb.txt | 92 ++
doc/driver-model/UDM-serial.txt | 42 +-
doc/feature-removal-schedule.txt | 32
+- .../arm1176/s3c64xx => drivers/crypto}/Makefile | 27 +-
drivers/crypto/ace_sha.c | 126 +++
drivers/crypto/ace_sha.h | 325 +++++++
drivers/mmc/bcm2835_sdhci.c | 5 +-
drivers/mmc/fsl_esdhc.c | 7 +
drivers/mtd/nand/Makefile | 2 +-
drivers/mtd/nand/mxc_nand.c | 260 +++---
drivers/mtd/nand/mxc_nand.h | 225
+++++ .../mtd/nand/mxc_nand_spl.c | 130 ++-
drivers/mtd/nand/ndfc.c | 4 +-
drivers/mtd/nand/omap_gpmc.c | 424 +++++++---
drivers/mtd/nand/s3c64xx.c | 295 -------
drivers/mtd/onenand/onenand_base.c | 4 -
drivers/mtd/onenand/samsung.c | 60 +-
drivers/serial/Makefile | 1 -
drivers/serial/ns16550.c | 18 +-
drivers/serial/s3c64xx.c | 187 ----
drivers/serial/serial.c | 2 -
drivers/spi/exynos_spi.c | 2 +
drivers/spi/mxc_spi.c | 8 +-
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ohci-hcd.c | 1 -
drivers/usb/musb-new/musb_core.c | 7 +
drivers/usb/musb-new/musb_uboot.c | 2 +-
drivers/video/exynos_dp.c | 76 +-
drivers/video/exynos_dp_lowlevel.c | 69 +-
drivers/video/exynos_dp_lowlevel.h | 1 +
drivers/video/exynos_fb.c | 230 ++++-
drivers/video/exynos_fimd.c | 44 +-
include/common.h | 7 +-
include/config_fallbacks.h | 16 +
include/configs/MPC8313ERDB.h | 2 +-
include/configs/am335x_evm.h | 1 +
include/configs/cam_enc_4xx.h | 4 +-
include/configs/da850evm.h | 4 +-
include/configs/dra7xx_evm.h | 2 +
include/configs/exynos5250-dt.h | 11 +-
include/configs/igep00x0.h | 3 -
include/configs/mx23_olinuxino.h | 162 ++--
include/configs/mx25pdk.h | 4 +
include/configs/mx28evk.h | 92 +-
include/configs/mx31pdk.h | 23 +-
include/configs/mx53ard.h | 10 +
include/configs/mx6qsabre_common.h | 2 +
include/configs/mx6qsabrelite.h | 3 -
include/configs/omap2420h4.h | 5 +-
include/configs/omap4_common.h | 22 +-
include/configs/omap5912osk.h | 15 +-
include/configs/omap5_common.h | 51 +-
include/configs/{omap5_evm.h => omap5_uevm.h} | 17 +
include/configs/rpi_b.h | 2 +-
include/configs/smdk6400.h | 296 -------
include/configs/trats.h | 1 +
include/configs/tricorder.h | 13 +-
include/configs/tx25.h | 22 +-
include/configs/wandboard.h | 209 +++++
include/fdtdec.h | 2 +
include/fsl_esdhc.h | 1 +
include/fsl_nfc.h | 170 ----
include/hw_sha.h | 50 ++
include/lcd.h | 9 -
include/onenand_uboot.h | 4 -
lib/Makefile | 2 +-
lib/fdtdec.c | 2 +
mkconfig | 9 -
nand_spl/board/freescale/mx31pdk/Makefile | 63 --
nand_spl/board/freescale/mx31pdk/u-boot.lds | 87 --
nand_spl/board/karo/tx25/Makefile | 84 --
nand_spl/board/karo/tx25/config.mk | 1 -
nand_spl/board/karo/tx25/u-boot.lds | 85 --
nand_spl/board/samsung/smdk6400/Makefile | 117 ---
nand_spl/board/samsung/smdk6400/config.mk | 40 -
nand_spl/board/samsung/smdk6400/u-boot.lds | 80 --
tools/logos/atmel.bmp | Bin 26334 ->
15478 bytes tools/scripts/define2mk.sed | 2
+ 223 files changed, 4011 insertions(+), 5347 deletions(-) delete mode
100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/timer.c rename
drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
(65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
board/freescale/mx31pdk/config.mk delete mode 100644
board/karo/tx25/config.mk delete mode 100644
board/samsung/smdk6400/.gitignore delete mode 100644
board/samsung/smdk6400/Makefile delete mode 100644
board/samsung/smdk6400/config.mk delete mode 100644
board/samsung/smdk6400/lowlevel_init.S delete mode 100644
board/samsung/smdk6400/smdk6400.c delete mode 100644
board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/mux_data.h (100%) create mode 100644
board/wandboard/Makefile create mode 100644 board/wandboard/README
create mode 100644 board/wandboard/wandboard.c
create mode 100644 doc/device-tree-bindings/video/exynos-dp.txt
create mode 100644 doc/device-tree-bindings/video/exynos-fb.txt
rename {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%)
create mode 100644 drivers/crypto/ace_sha.c
create mode 100644 drivers/crypto/ace_sha.h
create mode 100644 drivers/mtd/nand/mxc_nand.h
rename nand_spl/nand_boot_fsl_nfc.c => drivers/mtd/nand/mxc_nand_spl.c
(65%) delete mode 100644 drivers/mtd/nand/s3c64xx.c
delete mode 100644 drivers/serial/s3c64xx.c
rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%)
delete mode 100644 include/configs/smdk6400.h
create mode 100644 include/configs/wandboard.h
delete mode 100644 include/fsl_nfc.h
create mode 100644 include/hw_sha.h
delete mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
delete mode 100644 nand_spl/board/freescale/mx31pdk/u-boot.lds
delete mode 100644 nand_spl/board/karo/tx25/Makefile
delete mode 100644 nand_spl/board/karo/tx25/config.mk
delete mode 100644 nand_spl/board/karo/tx25/u-boot.lds
delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile
delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk
delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds
Amicalement,
--
Albert.
More information about the U-Boot
mailing list