[U-Boot] [PATCH v2 10/15] net: gem: Pass phy address to init
Michal Simek
michal.simek at xilinx.com
Tue Apr 23 12:46:09 CEST 2013
From: David Andrey <david.andrey at netmodule.com>
Pass the PHY address to the driver init to
allow parallel use of both interfaces
Signed-off-by: David Andrey <david.andrey at netmodule.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v2: None
board/xilinx/zynq/board.c | 6 ++++--
drivers/net/zynq_gem.c | 8 ++------
include/configs/zynq.h | 1 +
include/netdev.h | 2 +-
4 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 3af18f0..546adc8 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -42,10 +42,12 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_ZYNQ_GEM)
# if defined(CONFIG_ZYNQ_GEM0)
- ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0);
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
+ CONFIG_ZYNQ_GEM_PHY_ADDR0);
# endif
# if defined(CONFIG_ZYNQ_GEM1)
- ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1);
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
+ CONFIG_ZYNQ_GEM_PHY_ADDR1);
# endif
#endif
return ret;
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 2d717e9..316816d 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -427,7 +427,7 @@ static int zynq_gem_miiphy_write(const char *devname, uchar addr,
return phywrite(dev, addr, reg, val);
}
-int zynq_gem_initialize(bd_t *bis, int base_addr)
+int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr)
{
struct eth_device *dev;
struct zynq_gem_priv *priv;
@@ -443,11 +443,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr)
}
priv = dev->priv;
-#ifdef CONFIG_PHY_ADDR
- priv->phyaddr = CONFIG_PHY_ADDR;
-#else
- priv->phyaddr = -1;
-#endif
+ priv->phyaddr = phy_addr;
sprintf(dev->name, "Gem.%x", base_addr);
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index ebe1b1b..3b23354 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -54,6 +54,7 @@
#define CONFIG_NET_MULTI
#define CONFIG_ZYNQ_GEM
#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
#if defined(CONFIG_ZYNQ_DCC)
# define CONFIG_ARM_DCC
diff --git a/include/netdev.h b/include/netdev.h
index fd3e243..81117b1 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -104,7 +104,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
-int zynq_gem_initialize(bd_t *bis, int base_addr);
+int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr);
/*
* As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
* exported by a public hader file, we need a global definition at this point.
--
1.8.2.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130423/aed1ad57/attachment.pgp>
More information about the U-Boot
mailing list