[U-Boot] mx23evk resets when loading the kernel

Marek Vasut marex at denx.de
Fri Apr 26 16:15:15 CEST 2013


Dear Fabio Estevam,

> Hi,
> 
> Running U-boot 2013.04 on my mx23evk I get:
> 
> U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
> 
> CPU:   Freescale i.MX23 rev1.3 at 454 MHz
> BOOT:  SSP SD/MMC #0
> DRAM:  128 MiB
> MMC:   MXS MMC: 0
> In:    serial
> Out:   serial
> Err:   serial
> Hit any key to stop autoboot:  0
> mmc0 is current device
> reading boot.scr
> ** Unable to read file boot.scr **
> reading uImage
> 3258040 bytes read in 1112 ms (2.8 MiB/s)
> Booting from mmc ...
> reading imx23-evk.dtb
> 20944 bytes read in 33 ms (619.1 KiB/s)
> ## Booting kernel from Legacy Image at 42000000 ...
>    Image Name:   Linux-3.8.8-fslc+g7fd77a4
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    3257976 Bytes = 3.1 MiB
>    Load Address: 40008000
>    Entry Point:  40008000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 41000000
>    Booting using the fdt blob at 0x41000000
>    Loading Kernel Image ... OK
> OK
>    Loading Device Tree to 47b72000, end 47b7a1cf ... OK
> 
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> 
> 
> U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
> 
> CPU:   Freescale i.MX23 rev1.3 at 454 MHz
> BOOT:  SSP SD/MMC #0
> DRAM:  128 MiB
> 
> 
> U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
> 
> CPU:   Freescale i.MX23 rev1.3 at 454 MHz
> BOOT:  SSP SD/MMC #0
> DRAM:  128 MiB
> 
> (Constantly resets)
> 
> Tried doing bisect to find out the offending commit, but I was getting
> some other issues on the way masking the boot problem.
> 
> Does anyone have any ideas?
> 
> Thanks,
> 
> Fabio Estevam

Did you apply that patch of mine ?

Best regards,
Marek Vasut


More information about the U-Boot mailing list