[U-Boot] [PATCH v11 24/30] imx: Add u-boot-with-nand-spl.imx make target
Benoît Thébaudeau
benoit.thebaudeau at advansee.com
Tue Apr 9 21:48:53 CEST 2013
This image combines the SPL with the i.MX header, the FCB and U-Boot.
For i.MX25/35/51, the FCB is ignored by the boot ROM, so this image is just
useful because it can be programmed on a NAND Flash page boundary.
For i.MX53, the FCB is required by the boot ROM.
This does not support i.MX6 so far because its FCB is more complicated.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8:
- Change the dummy 1024-byte header into a true FCB in order to add support for
i.MX53.
- Use CONFIG_SPL_PAD_TO instead of CONFIG_SPL_MAX_SIZE for padding, which
allows to pad the SPL after adding the i.MX header and the FCB, which may
save time when the boot ROM loads the SPL.
- Add /u-boot-with-nand-spl.imx to .gitignore.
Changes in v7:
- New patch.
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
.gitignore | 1 +
Makefile | 5 +++++
arch/arm/imx-common/Makefile | 11 +++++++++++
3 files changed, 17 insertions(+)
diff --git a/.gitignore b/.gitignore
index e42d837..ed21203 100644
--- a/.gitignore
+++ b/.gitignore
@@ -31,6 +31,7 @@
/u-boot.hex
/u-boot.imx
/u-boot-with-spl.imx
+/u-boot-with-nand-spl.imx
/u-boot.map
/u-boot.srec
/u-boot.ldr
diff --git a/Makefile b/Makefile
index e22faa5..df03974 100644
--- a/Makefile
+++ b/Makefile
@@ -490,6 +490,10 @@ $(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
$(OBJTREE)/u-boot-with-spl.imx
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+ $(OBJTREE)/u-boot-with-nand-spl.imx
+
$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
@@ -855,6 +859,7 @@ clobber: tidy
@rm -f $(obj)u-boot.pbl
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot-with-spl.imx
+ @rm -f $(obj)u-boot-with-nand-spl.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index f59ae6f..44b6822 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -61,6 +61,17 @@ $(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
rm $(OBJTREE)/spl/u-boot-spl-pad.imx
+$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
+ (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \
+ dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | \
+ cat - $< > $(OBJTREE)/spl/u-boot-nand-spl.imx
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+ -I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
+ $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+ rm $(OBJTREE)/spl/u-boot-nand-spl.imx
+ cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
+ rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+
#########################################################################
--
1.7.10.4
More information about the U-Boot
mailing list