[U-Boot] [PATCH v2 7/8] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers

[Fabio Estevam]

HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as per 
FSL bootlets code.

mx23 Reference Manual mark HW_DRAM_CTL27 and HW_DRAM_CTL28 as "reserved".

HW_DRAM_CTL8 is setup as the last element.

So skip the initialization of these DRAM_CTL registers.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- To avoid polluting the mx28 case, separate the function definition in mx23 and
for mx28.

 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index df25535..bf58058 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -110,6 +110,7 @@ __weak void mxs_adjust_memory_params(uint32_t *dram_vals)
 {
 }
 
+#ifdef CONFIG_MX28
 static void initialize_dram_values(void)
 {
 	int i;
@@ -118,15 +119,26 @@ static void initialize_dram_values(void)
 
 	for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
 		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+#else
+static void initialize_dram_values(void)
+{
+	int i;
+
+	mxs_adjust_memory_params(dram_vals);
+
+	for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
+		if (!(i == 8 || i == 27 || i == 28 || i == 35))
+			writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+	}
 
-#ifdef CONFIG_MX23
 	/*
 	 * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
 	 * element to be set
 	 */
 	writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
-#endif
 }
+#endif
 
 static void mxs_mem_init_clock(void)
 {
-- 
1.7.9.5