May 2013 Archives by subject

Messages sorted by: [ thread ] [ author ] [ date ]
More info on this list...

Starting: Wed May 1 00:28:26 CEST 2013
Ending: Fri May 31 23:44:45 CEST 2013
Messages: 2394

[U-Boot] "No status update" errors in OMAP mmc_send_cmd() Tomi Valkeinen
[U-Boot] .gitignore: add GNU GLOBAL files Tom Rini
[U-Boot] 2013 Plumber's CFP: Fastboot Mehaffey, John
[U-Boot] 2013 Plumber's CFP: Fastboot Thomas Petazzoni
[U-Boot] 2013 Plumber's CFP: Fastboot richard -rw- weinberger
[U-Boot] 2013 Plumber's CFP: Fastboot Mehaffey, John
[U-Boot] 2013 Plumber's CFP: Fastboot Jeremiah Foster
[U-Boot] [ANN] SPI Custodian Tom Rini
[U-Boot] [ANN] SPI Custodian Stefan Roese
[U-Boot] [ARM] [STATUS] Resuming activity Albert ARIBAUD
[U-Boot] [HELP]: sf: winbond: add W25Q32 Jagan Teki
[U-Boot] [HELP]: sf: winbond: add W25Q32 Jagan Teki
[U-Boot] [HELP]: sf: winbond: add W25Q32 Rajeshwari Birje
[U-Boot] [HELP]: sf: winbond: add W25Q32 Jagan Teki
[U-Boot] [HELP]: sf: winbond: add W25Q32 Jagan Teki
[U-Boot] [HELP]: sf: winbond: add W25Q32 Rajeshwari Birje
[U-Boot] [HELP]: sf: winbond: add W25Q32 Jagan Teki
[U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage Simon Glass
[U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage Simon Glass
[U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage Tom Rini
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot Adnan Ali
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot Adnan Ali
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot Wolfgang Denk
[U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B Minkyu Kang
[U-Boot] [PATCH 0/2 V2] EXYNOS: Support a delay after deactivate for SPI Rajeshwari Shinde
[U-Boot] [PATCH 0/2 V3] exynos: Support a delay after deactivate for SPI Rajeshwari Shinde
[U-Boot] [PATCH 0/2 V3] SPI: Enable SPI_PREAMBLE Mode Rajeshwari Shinde
[U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode Rajeshwari Shinde
[U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode Jagan Teki
[U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode Rajeshwari Shinde
[U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode Simon Glass
[U-Boot] [PATCH 0/2] Add ccache support Marek Vasut
[U-Boot] [PATCH 0/2] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH 0/2] fix displaying IRQ stack info Masahiro Yamada
[U-Boot] [PATCH 0/2] fix flash_get_info function Masahiro Yamada
[U-Boot] [PATCH 0/2] Loader script updates for OpenRISC Stefan Kristiansson
[U-Boot] [PATCH 0/2] Loader script updates for OpenRISC Tom Rini
[U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220 Wolfgang Denk
[U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220 Tom Rini
[U-Boot] [PATCH 0/3] Add Arndale board support Minkyu Kang
[U-Boot] [PATCH 0/3] ARM: at91: fix and update README.at91 file Bo Shen
[U-Boot] [PATCH 0/3] ARM: atmel: add sama5d3xek board support Bo Shen
[U-Boot] [PATCH 0/3] ARM: OMAP4+: Misc Cleanup Lokesh Vutla
[U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support Stephen Warren
[U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support Stephen Warren
[U-Boot] [PATCH 0/4 v2] Exynos5: Add cpu freq and tmu throttling Akshay Saraswat
[U-Boot] [PATCH 0/4 V5] SMDK5250: FDT: Add device tree support for console Rajeshwari Shinde
[U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common. Rajeshwari Birje
[U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common. Rajeshwari Birje
[U-Boot] [PATCH 0/4] Factorize ARM relocation code Albert ARIBAUD
[U-Boot] [PATCH 0/4] sf: Accessing > 16MBytes flashes in existing 3-byte addr mode. Jagan Teki
[U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
[U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
[U-Boot] [PATCH 0/5] Optimize ARM relocation Benoît Thébaudeau
[U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
[U-Boot] [PATCH 0/5] Resync libfdt with dtc upstream gvb.uboot at gmail.com
[U-Boot] [PATCH 0/5] sf: Code cleanup patch set Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 0/5] sf: Code cleanup patch set Tom Rini
[U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support Andre Przywara
[U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support Albert ARIBAUD
[U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support Andre Przywara
[U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support Christoffer Dall
[U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support Andre Przywara
[U-Boot] [PATCH 0/6] nds32: fix build errors/warnings Gabor Juhos
[U-Boot] [PATCH 0/9] mx23: Make DDR initialization stable Fabio Estevam
[U-Boot] [PATCH 00/10] PXE support updates Rob Herring
[U-Boot] [PATCH 00/10] PXE support updates Joe Hershberger
[U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's Lokesh Vutla
[U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's Tom Rini
[U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's Lokesh Vutla
[U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation Albert ARIBAUD
[U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation Rob Herring
[U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation Albert ARIBAUD
[U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation Rob Herring
[U-Boot] [PATCH 01/12] ARM: DRA7xx: Add control id code for DRA7xx Lokesh Vutla
[U-Boot] [PATCH 01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27 Benoît Thébaudeau
[U-Boot] [PATCH 02/10] net: calxedaxgmac: enable rx cut-thru Rob Herring
[U-Boot] [PATCH 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC Lokesh Vutla
[U-Boot] [PATCH 02/12] imx: iomux-v3: Add missing definitions to iomux-mx51.h Benoît Thébaudeau
[U-Boot] [PATCH 03/10] ARM: highbank: update config options Rob Herring
[U-Boot] [PATCH 03/10] ARM: highbank: update config options Tom Rini
[U-Boot] [PATCH 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC Lokesh Vutla
[U-Boot] [PATCH 03/12] imx: mx51evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count Andy Fleming
[U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count Hu Mingkai-B21284
[U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count Fleming Andy-AFLEMING
[U-Boot] [PATCH 04/10] ARM: highbank: fix get_tbclk value to timer rate Rob Herring
[U-Boot] [PATCH 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages Lokesh Vutla
[U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3 Matt Sealey
[U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3 Matt Sealey
[U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 05/10] ARM: highbank: set timer prescaler to 256 Rob Herring
[U-Boot] [PATCH 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's Lokesh Vutla
[U-Boot] [PATCH 05/12] imx: vision2: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 06/10] ARM: highbank: avoid bss write in timer_init Rob Herring
[U-Boot] [PATCH 06/12] ARM: DRA7xx: Change the Debug UART to UART1 Lokesh Vutla
[U-Boot] [PATCH 06/12] imx: iomux-v3: Add iomux-mx53.h Benoît Thébaudeau
[U-Boot] [PATCH 07/10] ARM: highbank: enable reset on command timeout Rob Herring
[U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ Lokesh Vutla
[U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ Tom Rini
[U-Boot] [PATCH 07/12] imx: ima3-mx53: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status Rob Herring
[U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status Tom Rini
[U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address Lokesh Vutla
[U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address Tom Rini
[U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address Sricharan R
[U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address Tom Rini
[U-Boot] [PATCH 08/12] imx: mx53ard: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off Rob Herring
[U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off Albert ARIBAUD
[U-Boot] [PATCH 09/12] imx: mx53evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1 Lokesh Vutla
[U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1 Tom Rini
[U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed Jim Lin
[U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed Stephen Warren
[U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions Tom Rini
[U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions Lubomir Popov
[U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C Simon Glass
[U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C Mathias leblanc
[U-Boot] [PATCH 1/2 v12] Enable Btrfs support in mx53loco config Adnan Ali
[U-Boot] [PATCH 1/2 V2] EXYNOS: Export timer_get_us() to get microsecond timer Rajeshwari Shinde
[U-Boot] [PATCH 1/2 v2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct Wolfgang Denk
[U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B Jagan Teki
[U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B Jagan Teki
[U-Boot] [PATCH 1/2 V3] exynos: Export timer_get_us() to get microsecond timer Rajeshwari Shinde
[U-Boot] [PATCH 1/2 V3] SPI: Add support for preamble bytes Rajeshwari Shinde
[U-Boot] [PATCH 1/2 V4] SPI: Add support for preamble bytes Rajeshwari Shinde
[U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes Rajeshwari Shinde
[U-Boot] [PATCH 1/2] arm: fix displaying IRQ stack info Masahiro Yamada
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU 1 of Tegra114 Stephen Warren
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors Simon Glass
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors Tom Rini
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors Simon Glass
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors Simon Glass
[U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache Wolfgang Denk
[U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache Marek Vasut
[U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache Marek Vasut
[U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator Masahiro Yamada
[U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator Stefan Roese
[U-Boot] [PATCH 1/2] doc/README.scrapyard: add missing commit IDs Wolfgang Denk
[U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer Simon Glass
[U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer Rajeshwari Birje
[U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree Simon Glass
[U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree Stephen Warren
[U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree Simon Glass
[U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree Stephen Warren
[U-Boot] [PATCH 1/2] microblaze: bootm: Fix coding style issues Michal Simek
[U-Boot] [PATCH 1/2] mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND Tom Rini
[U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board Otavio Salvador
[U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board Fabio Estevam
[U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board Stefano Babic
[U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board Renato Frias
[U-Boot] [PATCH 1/2] openrisc: specify a memory region for u_boot_lists Stefan Kristiansson
[U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code Naveen Krishna Ch
[U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V Kim Phillips
[U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V Holger Brunck
[U-Boot] [PATCH 1/2] SPI: Add support for preamble bytes Simon Glass
[U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL Joel A Fernandes
[U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL Tom Rini
[U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL Joel A Fernandes
[U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL Tom Rini
[U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86 Simon Glass
[U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86 Tom Rini
[U-Boot] [PATCH 1/2] usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSize Vivek Gautam
[U-Boot] [PATCH 1/2] wandboard: Enable HDMI splashscreen Fabio Estevam
[U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Otavio Salvador
[U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Wolfgang Denk
[U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature Simon Glass
[U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature Rajeshwari Birje
[U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature Simon Glass
[U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature Minkyu Kang
[U-Boot] [PATCH 1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register Bo Shen
[U-Boot] [PATCH 1/3] ARM: at91: fix and update README.at91 document Bo Shen
[U-Boot] [PATCH 1/3] ARM: OMAP4+: Cleanup header files Lokesh Vutla
[U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114 Stephen Warren
[U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114 Stephen Warren
[U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114 Jim Lin
[U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114 Venu Byravarasu
[U-Boot] [PATCH 1/3] mmc: report capacity for the selected partition Stephen Warren
[U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V Fabio Estevam
[U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V Marek Vasut
[U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V Stefano Babic
[U-Boot] [PATCH 1/3] mx28evk: Add splash screen support Fabio Estevam
[U-Boot] [PATCH 1/3] mx28evk: Add splash screen support Stefano Babic
[U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry Andreas Bießmann
[U-Boot] [PATCH 1/3] omap-common/hwinit-common.c: Mark omap_rev_string as static Tom Rini
[U-Boot] [PATCH 1/3] usb: properly re-initialize the USB keyboard. Simon Glass
[U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686 Simon Glass
[U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686 Akshay Saraswat
[U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial Simon Glass
[U-Boot] [PATCH 1/4 V5] EXYNOS5: FDT: Add compatible strings for Serial Rajeshwari Shinde
[U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function Marek Vasut
[U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function Stefano Babic
[U-Boot] [PATCH 1/4] EXYNOS: Add API for power reset and exit wakeup Simon Glass
[U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686 Simon Glass
[U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast Tom Rini
[U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast Wolfgang Denk
[U-Boot] [PATCH 1/4] Rename arch/arm/lib/bss.c to sections.c Albert ARIBAUD
[U-Boot] [PATCH 1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support Andy Fleming
[U-Boot] [PATCH 1/5] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
[U-Boot] [PATCH 1/5] Export fdt_stringlist_contains() gvb.uboot at gmail.com
[U-Boot] [PATCH 1/5] Export fdt_stringlist_contains() Simon Glass
[PATCH 1/5] omap5: add qspi support Matt Porter
[U-Boot] [PATCH 1/5] sf: eon|spansion|ramtron: Fix code cleanup Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support Wang Huan-B18965
[U-Boot] [PATCH 1/6 v2] powerpc/doc: Update the README.srio-pcie-boot-corenet Liu Gang
[U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE Peter Korsgaard
[U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE Tom Rini
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Andre Przywara
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Marc Zyngier
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Peter Maydell
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Andre Przywara
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Christoffer Dall
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Andre Przywara
[U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state Albert ARIBAUD
[U-Boot] [PATCH 1/6] nds32: introduce macros for bit manipulation Gabor Juhos
[U-Boot] [PATCH 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script ying.zhang at freescale.com
[U-Boot] [PATCH 1/6] README: mx28_common: Keep the text within 80 columns Fabio Estevam
[U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports Rob Herring
[U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports Tom Rini
[U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter Fabio Estevam
[U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter Marek Vasut
[U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter Marek Vasut
[U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter Fabio Estevam
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Wolfgang Denk
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Otavio Salvador
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Otavio Salvador
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Otavio Salvador
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 10/10] highbank: enable keyed autoboot stop Rob Herring
[U-Boot] [PATCH 10/12] ARM: DRA7xx: Update pinmux data Lokesh Vutla
[U-Boot] [PATCH 10/12] imx: mx53loco: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 11/12] ARM: DRA7xx: clocks: Update PLL values Lokesh Vutla
[U-Boot] [PATCH 11/12] imx: mx53smd: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board Lokesh Vutla
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Marek Vasut
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Marek Vasut
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Marek Vasut
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Marek Vasut
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Marek Vasut
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Stefano Babic
[U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support Stefano Babic
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Wolfgang Denk
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Wolfgang Denk
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Wolfgang Denk
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Adnan Ali
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Wolfgang Denk
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Adnan Ali
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Tom Rini
[U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command Adnan Ali
[U-Boot] [PATCH 2/2 V2] EXYNOS: SPI: Support a delay after deactivate Rajeshwari Shinde
[U-Boot] [PATCH 2/2 v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes Wolfgang Denk
[U-Boot] [PATCH 2/2 V3] EXYNOS: SPI: Support SPI_PREAMBLE mode Rajeshwari Shinde
[U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate Rajeshwari Shinde
[U-Boot] [PATCH 2/2 V4] EXYNOS: SPI: Support SPI_PREAMBLE mode Rajeshwari Shinde
[U-Boot] [PATCH 2/2 V5] spi: exynos: Support SPI_PREAMBLE mode Rajeshwari Shinde
[U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. Wolfgang Denk
[U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. SARTRE Leo
[U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. Stefano Babic
[U-Boot] [PATCH 2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver Joel A Fernandes
[U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m Stephen Warren
[U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m Simon Glass
[U-Boot] [PATCH 2/2] ARM: tegra: support SKU 7 of Tegra20 Stephen Warren
[U-Boot] [PATCH 2/2] buildman: Produce a sensible error message when branch is missing Simon Glass
[U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input Masahiro Yamada
[U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input Stefan Roese
[U-Boot] [PATCH 2/2] common: arm: fix displaying IRQ stack info Masahiro Yamada
[U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache Marek Vasut
[U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache Wolfgang Denk
[U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache Marek Vasut
[U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache Marek Vasut
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support a delay after deactivate Simon Glass
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Vadim Bendebury
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Vadim Bendebury
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Vadim Bendebury
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Vadim Bendebury
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd Michal Simek
[U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd Michal Simek
[U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset Renato Frias
[U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset Stefano Babic
[U-Boot] [PATCH 2/2] openrisc: move board linker script(s) to a common in cpu/ Stefan Kristiansson
[U-Boot] [PATCH 2/2] Power: remove support for Freescale MPC8220 Wolfgang Denk
[U-Boot] [PATCH 2/2] powerpc/83xx/km: make local functions and structs static Holger Brunck
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Dirk Behme
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Troy Kisky
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Troy Kisky
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Dirk Behme
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Troy Kisky
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Dirk Behme
[U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm Troy Kisky
[U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox Simon Glass
[U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox Tom Rini
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Vivek Gautam
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Kyungmin Park
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Vivek Gautam
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Łukasz Dałek
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Piotr Wilczek
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Marek Vasut
[U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize Albert ARIBAUD
[U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo Otavio Salvador
[U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo Wolfgang Denk
[U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo Wolfgang Denk
[U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo Otavio Salvador
[U-Boot] [PATCH 2/2] wandboard: Disable data cache Fabio Estevam
[U-Boot] [PATCH 2/2] wandboard: Disable data cache Anatolij Gustschin
[U-Boot] [PATCH 2/2] wandboard: Disable data cache Fabio Estevam
[U-Boot] [PATCH 2/2] wandboard: Disable data cache Wolfgang Denk
[U-Boot] [PATCH 2/2] wandboard: Disable data cache Fabio Estevam
[U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions Simon Glass
[U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END Tom Rini
[U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END Peter Korsgaard
[U-Boot] [PATCH 2/3] ARM: at91: add at91sam9x5 and sama5d3x information Bo Shen
[U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks Tom Rini
[U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks Sricharan R
[U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks Lokesh Vutla
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tom Warren
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Marek Vasut
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tom Warren
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tom Warren
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Marek Vasut
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tom Rini
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Jim Lin
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tom Warren
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Stephen Warren
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Jim Lin
[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Stephen Warren
[U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET Stephen Warren
[U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET Tom Rini
[U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET Stephen Warren
[U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET Tom Rini
[U-Boot] [PATCH 2/3] mx23evk: Add splash screen support Fabio Estevam
[U-Boot] [PATCH 2/3] mx23evk: Add splash screen support Stefano Babic
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Marek Vasut
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Fabio Estevam
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Marek Vasut
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Fabio Estevam
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Marek Vasut
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Fabio Estevam
[U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads Stefano Babic
[U-Boot] [PATCH 2/3] USB: ohci-at91: support sama5d3x devices Bo Shen
[U-Boot] [PATCH 2/3] usb: workaround non-working keyboards. Simon Glass
[U-Boot] [PATCH 2/4 v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 Akshay Saraswat
[U-Boot] [PATCH 2/4 V5] EXYNOS5: FDT: Add serial device node values Rajeshwari Shinde
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Benoît Thébaudeau
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Benoît Thébaudeau
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 2/4] arm: mxs: Add LCDIF registers for i.MX233 Stefano Babic
[U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5 Simon Glass
[U-Boot] [PATCH 2/4] EXYNOS: LDS file move to common Simon Glass
[U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam Tom Rini
[U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam Wolfgang Denk
[U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam Wolfgang Denk
[U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam Tom Rini
[U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam Scott Wood
[U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access Heiko Schocher
[U-Boot] [PATCH 2/5] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 2/5] Fix typo gvb.uboot at gmail.com
[U-Boot] [PATCH 2/5] sf: sst: Fix code cleanup Jagannadha Sutradharudu Teki
[PATCH 2/5] spi: add TI QSPI driver Matt Porter
[U-Boot] [PATCH 2/6 v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module Liu Gang
[U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash Tom Rini
[U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash Peter Korsgaard
[U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash Tom Rini
[U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash Tom Rini
[U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state Andre Przywara
[U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state Christoffer Dall
[U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state Andre Przywara
[U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined Gabor Juhos
[U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined Kuo-Jung Su
[U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS ying.zhang at freescale.com
[U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS Scott Wood
[U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS Zhang Ying-B40530
[U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port Marek Vasut
[U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port Fabio Estevam
[U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port Marek Vasut
[U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port Fabio Estevam
[U-Boot] [PATCH 2/7] ahci: fix unaligned access Rob Herring
[U-Boot] [PATCH 2/7] ahci: fix unaligned access Tom Rini
[U-Boot] [PATCH 2/7] ahci: fix unaligned access Wolfgang Denk
[U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module Andy Fleming
[U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module Liu Gang
[U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module Andy Fleming
[U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module Liu Gang
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Marek Vasut
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Fabio Estevam
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Marek Vasut
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Fabio Estevam
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Marek Vasut
[U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23 Fabio Estevam
[U-Boot] [PATCH 2/9] mx53loco: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 Simon Glass
[U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 Minkyu Kang
[U-Boot] [PATCH 3/3] am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c Tom Rini
[U-Boot] [PATCH 3/3] ARM: at91: add NAND partition table and index Bo Shen
[U-Boot] [PATCH 3/3] ARM: atmel: add sama5d3xek support Bo Shen
[U-Boot] [PATCH 3/3] ARM: OMAP4+: pmic: Make generic bus init and write functions Lokesh Vutla
[U-Boot] [PATCH 3/3] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards Stephen Warren
[U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h Stefan Roese
[U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads Marek Vasut
[U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads Fabio Estevam
[U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads Stefano Babic
[U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function Stephen Warren
[U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd Simon Glass
[U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd Marek Vasut
[U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd Simon Glass
[U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd Marek Vasut
[U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd Julius Werner
[U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes Marek Vasut
[U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes Fabio Estevam
[U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes Stefano Babic
[U-Boot] [PATCH 3/4 v2] smdk5250: enable support for tmu throttling Akshay Saraswat
[U-Boot] [PATCH 3/4 V5] S5P: Serial: Add fdt support to driver Rajeshwari Shinde
[U-Boot] [PATCH 3/4] arm: make relocation section symbols compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver Anatolij Gustschin
[U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver Stefano Babic
[U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver Stefano Babic
[U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short. Tom Rini
[U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short. Wolfgang Denk
[U-Boot] [PATCH 3/4] EXYNOS4210: Configure GPIO for uart Simon Glass
[U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus Simon Glass
[U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling Simon Glass
[U-Boot] [PATCH 3/5] Added license header to dtc/libfdt/fdt.h and libfdt_env.h gvb.uboot at gmail.com
[U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Benoît Thébaudeau
[U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Albert ARIBAUD
[U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Albert ARIBAUD
[PATCH 3/5] dra7xx_evm: add SPL API, QSPI, and serial flash support Matt Porter
[U-Boot] [PATCH 3/5] sf: stmicro: Fix code cleanup Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 3/6 v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE Liu Gang
[U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT Tom Rini
[U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT Peter Korsgaard
[U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT Tom Rini
[U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution Andre Przywara
[U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution Andre Przywara
[U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution Christoffer Dall
[U-Boot] [PATCH 3/6] block: constify sect_buf argument of ide_write_data Gabor Juhos
[U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Tom Rini
[U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence Fabio Estevam
[U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry Rob Herring
[U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry Tom Rini
[U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH 3/9] mx51evk: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 4/4 v2] Exynos5: config: enable cpu freq Akshay Saraswat
[U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console Simon Glass
[U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console Rajeshwari Birje
[U-Boot] [PATCH 4/4 V5] CONFIG: EXYNOS5: Enable silent console Rajeshwari Shinde
[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine Simon Glass
[U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK Anatolij Gustschin
[U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK Stefano Babic
[U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq Simon Glass
[U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm. Simon Glass
[U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm. Rajeshwari Birje
[U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm. Simon Glass
[U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC Tom Rini
[U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC Wolfgang Denk
[U-Boot] [PATCH 4/4] sf: winbond: Add support for W25Q256 Jagan Teki
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
[U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration Simon Glass
[U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration gvb.uboot at gmail.com
[U-Boot] [PATCH 4/5] sf: Fix line over 80 chars cleanup Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format Andy Fleming
[U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format Andy Fleming
[U-Boot] [PATCH 4/6 v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE Liu Gang
[U-Boot] [PATCH 4/6] am335x_evm: Rework board_is_foo() checks Tom Rini
[U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch Andre Przywara
[U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch Christoffer Dall
[U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch Andre Przywara
[U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5 Stefano Babic
[U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area ying.zhang at freescale.com
[U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area Tom Rini
[U-Boot] [PATCH 4/6] pci: add prototype for pci_ftpci_init() function Gabor Juhos
[U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs Fabio Estevam
[U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs Marek Vasut
[U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function Rob Herring
[U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function Tom Rini
[U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH 4/9] mx53ard: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 5/5] arm: optimize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH 5/5] arm: optimize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH 5/5] arm: optimize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH 5/5] cmd_sf: Fix code cleanup Jagannadha Sutradharudu Teki
[U-Boot] [PATCH 5/5] Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h gvb.uboot at gmail.com
[U-Boot] [PATCH 5/6 v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE Liu Gang
[U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape Peter Korsgaard
[U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape Tom Rini
[U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape Tom Rini
[U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode Andre Przywara
[U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode Tom Rini
[U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode Christoffer Dall
[U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode Andre Przywara
[U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling Stefano Babic
[U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory Fabio Estevam
[U-Boot] [PATCH 5/6] pci: move pci_ftpci100.h to include/faraday/ftpci100.h Gabor Juhos
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality ying.zhang at freescale.com
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up Tom Rini
[U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up Rob Herring
[U-Boot] [PATCH 5/9] mx23evk: Disable the internal pad keepers Fabio Estevam
[U-Boot] [PATCH 5/9] mx53evk: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 6/6 v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE Liu Gang
[U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR. Peter Korsgaard
[U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR. Peter Korsgaard
[U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH 6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15 Andre Przywara
[U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory Marek Vasut
[U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory Fabio Estevam
[U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory Marek Vasut
[U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory Fabio Estevam
[U-Boot] [PATCH 6/6] nds32: adp-ag102: use 'faraday/ftpci100.h' for pci_ftpci_init Gabor Juhos
[U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL ying.zhang at freescale.com
[U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL Zhang Ying-B40530
[U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec Rob Herring
[U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec Tom Rini
[U-Boot] [PATCH 6/9] mx23_olinuxino: Disable the internal pad keepers Fabio Estevam
[U-Boot] [PATCH 6/9] mx53smd: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions Rob Herring
[U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions Tom Rini
[U-Boot] [PATCH 7/9] mx6qarm2: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations Fabio Estevam
[U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations Marek Vasut
[U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations Fabio Estevam
[U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations Marek Vasut
[U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations Fabio Estevam
[U-Boot] [PATCH 8/9] mx6qsabrelite: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Marek Vasut
[U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Fabio Estevam
[U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Stefano Babic
[U-Boot] [PATCH 9/9] mx6qsabresd: Return error if the SDHC port index is invalid Fabio Estevam
[U-Boot] [PATCH 9/9] mxs: spl_mem_init: Change EMI port priority Fabio Estevam
[U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus. Michael Trimarchi
[U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus. Igor Grinberg
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Nishanth Menon
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Tom Rini
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Tom Rini
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Tom Rini
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Sricharan R
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Tom Rini
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Tom Rini
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Lubomir Popov
[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested) Gilles Chanteperdrix
[U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build Stephen Warren
[U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build Axel Lin
[U-Boot] [PATCH v02 0/2] OMAP3+: introduce generic Adaptive Body Bias Support Andrii Tseglytskyi
[U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain Andrii Tseglytskyi
[U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain Nishanth Menon
[U-Boot] [PATCH v03 0/2] OMAP3+: introduce generic Adaptive Body Bias Support Andrii Tseglytskyi
[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v03 2/2] OMAP5: add ABB setup for MPU voltage domain Andrii Tseglytskyi
[U-Boot] [PATCH v0] davinci, mmc: Added a delay reading ext CSD register Andy Fleming
[U-Boot] [PATCH v1 0/2] OMAP3+: introduce generic Adaptive Body Bias Support Andrii Tseglytskyi
[U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C Simon Glass
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Andrii Tseglytskyi
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Tom Rini
[U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support Nishanth Menon
[U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API. Sonic Zhang
[U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API. Mike Frysinger
[U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API. Sonic Zhang
[U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command Sonic Zhang
[U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command Tom Rini
[U-Boot] [PATCH v1 2/2] OMAP5: add ABB setup for MPU voltage domain Andrii Tseglytskyi
[U-Boot] [PATCH v1 2/3] blackfin: Add memory virtual console to blackfin serial driver. Sonic Zhang
[U-Boot] [PATCH v1 3/3] blackfin: Uart divisor should be set after their values are generated. Sonic Zhang
[U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder. Sonic Zhang
[U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder. Mike Frysinger
[U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder. Sonic Zhang
[U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards dirk.eibach at gdsys.cc
[U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards Wolfgang Denk
[U-Boot] [PATCH v2 0/11] Add Regular Expressions Support Tom Rini
[U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT Simon Glass
[U-Boot] [PATCH V2 0/4] ARM: OMAP2+: Misc Cleanup Lokesh Vutla
[U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function Sricharan R
[U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function Sricharan R
[U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function Tom Rini
[U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function Tom Rini
[U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function Tom Rini
[U-Boot] [PATCH v2 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Alison Wang
[U-Boot] [PATCH v2 0/6] Optimize ARM relocation Albert ARIBAUD
[U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support Michal Simek
[U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support Tom Rini
[U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support Michal Simek
[U-Boot] [PATCH v2 0/8] sf: spansion|winbond: ID table corrections/updates Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 0/9] mx23: Make DDR initialization stable Fabio Estevam
[U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's Lokesh Vutla
[U-Boot] [PATCH v2 00/16] sf: Update sf framework to support all sizes of flashes Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA dirk.eibach at gdsys.cc
[U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA Wolfgang Denk
[U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA Wolfgang Denk
[U-Boot] [PATCH V2 01/12] ARM: DRA7xx: Add control id code for DRA7xx Lokesh Vutla
[U-Boot] [PATCH v2 01/16] sf: Add bank address register writing support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 02/10] powerpc/ppc4xx: Add gdsys mclink interface dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC Lokesh Vutla
[U-Boot] [PATCH v2 02/16] sf: Add bank address register reading support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 03/10] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC Lokesh Vutla
[U-Boot] [PATCH v2 03/16] sf: Add extended addr write support for winbond|stmicro Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code dirk.eibach at gdsys.cc
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code Wolfgang Denk
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code Tom Rini
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code Dirk Eibach
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code Tom Rini
[U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code Dirk Eibach
[U-Boot] [PATCH V2 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages Lokesh Vutla
[U-Boot] [PATCH v2 04/16] sf: Add extended addr read support for winbond|stmicro Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware dirk.eibach at gdsys.cc
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Wolfgang Denk
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Wolfgang Denk
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Wolfgang Denk
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Dirk Eibach
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Dirk Eibach
[U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware Joe Hershberger
[U-Boot] [PATCH V2 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's Lokesh Vutla
[U-Boot] [PATCH v2 05/16] sf: read flash bank addr register at probe time Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards dirk.eibach at gdsys.cc
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Wolfgang Denk
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards Dirk Eibach
[U-Boot] [PATCH V2 06/12] ARM: DRA7xx: Change the Debug UART to UART1 Lokesh Vutla
[U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 07/10] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ Lokesh Vutla
[U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW Jagan Teki
[U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW Jagan Teki
[U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW Allen Martin
[U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW Jagan Teki
[U-Boot] [PATCH v2 07/16] sf: Update sf read to support all sizes of flashes Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 08/10] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 08/12] ARM: DRA7xx: Correct SRAM END address Lokesh Vutla
[U-Boot] [PATCH v2 08/16] sf: Use spi_flash_addr() in write call Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 09/10] powerpc/ppc4xx: Consider gdsys FPGA OSD size dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1 Lokesh Vutla
[U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1 Lubomir Popov
[U-Boot] [PATCH v2 09/16] sf: stmicro: Add support for N25Q512 Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 1/2] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Axel Lin
[U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch Sonic Zhang
[U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch Sonic Zhang
[U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree Stephen Warren
[U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree Simon Glass
[U-Boot] [PATCH v2 1/2] microblaze: bootm: Fix coding style issues Michal Simek
[U-Boot] [PATCH v2 1/2] spi: mxc_spi: Fix pre and post divider calculation Dirk Behme
[U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Wolfgang Denk
[U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Wolfgang Denk
[U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Otavio Salvador
[U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Otavio Salvador
[U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards Otavio Salvador
[U-Boot] [PATCH V2 1/4] ARM: OMAP4+: Cleanup header files Lokesh Vutla
[U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code. Benoît Thébaudeau
[U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code. Benoît Thébaudeau
[U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC Stephen Warren
[U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC Peter Korsgaard
[U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices Andreas Bießmann
[U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices Bo Shen
[U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
[U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Stefano Babic
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Albert ARIBAUD
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Stefano Babic
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Albert ARIBAUD
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Stefano Babic
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Wang Huan-B18965
[U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Alison Wang
[U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k Stefano Babic
[U-Boot] [PATCH v2 1/6] imx: iomux-v3: Add iomux-mx25.h Benoît Thébaudeau
[U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly Peter Korsgaard
[U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly Tom Rini
[U-Boot] [PATCH v2 1/7] fpga: Clean coding style Michal Simek
[U-Boot] [PATCH v2 1/8] mx23: Fix pad voltage selection bit Fabio Estevam
[U-Boot] [PATCH v2 1/8] sf: spansion: Update the name for S25FL256S flash Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 10/10] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards dirk.eibach at gdsys.cc
[U-Boot] [PATCH V2 10/12] ARM: DRA7xx: Update pinmux data Lokesh Vutla
[U-Boot] [PATCH v2 10/16] sf: stmicro: Add support for N25Q512A Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V2 11/12] ARM: DRA7xx: clocks: Update PLL values Lokesh Vutla
[U-Boot] [PATCH v2 11/16] sf: stmicro: Add support for N25Q1024 Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V2 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board Lokesh Vutla
[U-Boot] [PATCH v2 12/16] sf: stmicro: Add support for N25Q1024A Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 13/16] sf: spansion: Add support for S25FL512S_256K Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 14/16] sf: Use spi_flash_read_common() in write status poll Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 15/16] sf: Remove spi_flash_cmd_poll_bit() Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V2 2/2] ARM: bcm2835: add simplefb DT node during bootz/m Stephen Warren
[U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command Sonic Zhang
[U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command Sonic Zhang
[U-Boot] [PATCH v2 2/2] microblaze: bootm: Add support for loading initrd Michal Simek
[U-Boot] [PATCH v2 2/2] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build Axel Lin
[U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo Otavio Salvador
[U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo Wolfgang Denk
[U-Boot] [PATCH V2 2/4] ARM: OMAP5: clocks: Do not enable sgx clocks Lokesh Vutla
[U-Boot] [PATCH V2 2/4] mmc: report capacity for the selected partition Stephen Warren
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Andreas Bießmann
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Joe Hershberger
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Bo Shen
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Andreas Bießmann
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Joe Hershberger
[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices Bo Shen
[U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code. Benoît Thébaudeau
[U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Benoît Thébaudeau
[U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Stefano Babic
[U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v2 2/6] imx: mx25pdk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v2 2/6] remove all references to .dynsym Albert ARIBAUD
[U-Boot] [PATCH v2 2/7] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE Tom Rini
[U-Boot] [PATCH v2 2/7] fpga: Fix debug message compilation error Michal Simek
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Fabio Estevam
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Michael Heimpold
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Fabio Estevam
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Marek Vasut
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Michael Heimpold
[U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions Fabio Estevam
[U-Boot] [PATCH v2 2/8] sf: spansion: Add support for S25FL128S_64K Jagannadha Sutradharudu Teki
[U-Boot] [Patch v2 3/3] ARM: at91sam9n12: add network support with ksz8851_16mll Andreas Bießmann
[U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds Albert ARIBAUD
[U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds Benoît Thébaudeau
[U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds Albert ARIBAUD
[U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds Benoît Thébaudeau
[U-Boot] [PATCH V2 3/4] ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h Lokesh Vutla
[U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET Peter Korsgaard
[U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET Stephen Warren
[U-Boot] [Patch v2 3/4] SPI: atmel_spi: support sama5d3x devices Andreas Bießmann
[U-Boot] [PATCH v2 3/6] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
[U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600 Benoît Thébaudeau
[U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600 Stefano Babic
[U-Boot] [PATCH v2 3/6] imx: mx25pdk: Fix GPIO assignments Benoît Thébaudeau
[U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info Tom Rini
[U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info Peter Korsgaard
[U-Boot] [PATCH v2 3/7] cmd: fpga: Clean coding style Michal Simek
[U-Boot] [PATCH v2 3/8] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v2 3/8] sf: winbond: Add support for W25Q80BW Jagannadha Sutradharudu Teki
[U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support Andreas Bießmann
[U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support Bo Shen
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH V2 4/4] ARM: OMAP4+: pmic: Make generic bus init and write functions Lokesh Vutla
[U-Boot] [PATCH V2 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards Stephen Warren
[U-Boot] [PATCH V2 4/5] ARM: OMAP: Cleanup boot parameters usage Tom Rini
[U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Benoît Thébaudeau
[U-Boot] [PATCH v2 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v2 4/6] imx: tx25: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT Tom Rini
[U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT Peter Korsgaard
[U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c Michal Simek
[U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c Tom Rini
[U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c Michal Simek
[U-Boot] [PATCH v2 4/8] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v2 4/8] sf: winbond: Correct the nr_blocks used for W25Q32DW Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V2 5/5] ARM: OMAP: Add arch_cpu_init function Tom Rini
[U-Boot] [PATCH v2 5/6] arm: make __rel_dyn_{start, end} compiler-generated Albert ARIBAUD
[U-Boot] [PATCH v2 5/6] arm: mvf600: Add uart support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v2 5/6] imx: zmx25: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks Tom Rini
[U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks Peter Korsgaard
[U-Boot] [PATCH v2 5/7] cmd: fpga: Do not include net.h Michal Simek
[U-Boot] [PATCH v2 5/8] mxs: spl_mem_init: Fix comment about start bit Fabio Estevam
[U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Alison Wang
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Shawn Guo
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Stefano Babic
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Benoît Thébaudeau
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Stefano Babic
[U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Stefano Babic
[U-Boot] [PATCH v2 6/6] arm: optimize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v2 6/6] imx: mx25: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Peter Korsgaard
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Peter Korsgaard
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Peter Korsgaard
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Tom Rini
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Tom Rini
[U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape Tom Rini
[U-Boot] [PATCH v2 6/7] fpga: zynq: Add support for loading bitstream Michal Simek
[U-Boot] [PATCH v2 6/8] mxs: spl_mem_init: Remove erroneous DDR setting Fabio Estevam
[U-Boot] [PATCH v2 6/8] sf: winbond: Add support for W25Q128FW Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Peter Korsgaard
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Peter Korsgaard
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Peter Korsgaard
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR. Tom Rini
[U-Boot] [PATCH v2 7/7] fpga: Check device name against bitstream name Michal Simek
[U-Boot] [PATCH v2 7/8] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Fabio Estevam
[U-Boot] [PATCH v2 7/8] sf: winbond: Add support for W25Q16DW Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v2 8/8] mxs: spl_mem_init: Change EMI port priority Fabio Estevam
[U-Boot] [PATCH v2 8/8] sf: winbond: Add support for W25QXXXFV Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus. Michael Trimarchi
[U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus. Igor Grinberg
[U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus. Michael Trimarchi
[U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree Stephen Warren
[U-Boot] [PATCH V2 REPOST 2/2] ARM: bcm2835: add simplefb DT node during bootz/m Stephen Warren
[U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC Andy Fleming
[U-Boot] [Patch v2, batch 1 09/10] powerpc/corenet_ds: Move SRIO enablement into specific boards Andy Fleming
[U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support Andy Fleming
[U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support York Sun
[U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support Andy Fleming
[U-Boot] [Patch v2, batch 2 15/23] T4/USB: Add USB 2.0 UTMI dual phy support Andy Fleming
[U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation Andy Fleming
[U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation York Sun
[U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation Fleming Andy-AFLEMING
[U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC Tom Rini
[U-Boot] [Patch v2, batch 3 08/17] powerpc/85xx: fix build error introduced by serdes_get_prtcl Andy Fleming
[U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH v2] Add support for Wandboard quad. Tapani Utriainen
[U-Boot] [PATCH v2] Add support for Wandboard quad. Otavio Salvador
[U-Boot] [PATCH v2] arm: fix a comment y at epochmail.jp.panasonic.com
[U-Boot] [PATCH v2] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH v2] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH v2] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH v2] arm: fix a comment Albert ARIBAUD
[U-Boot] [PATCH v2] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH v2] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R Rob Herring
[U-Boot] [PATCH v2] ARM: highbank: setup peripherals based on power domain status Rob Herring
[U-Boot] [PATCH v2] ARM: highbank: update config options Rob Herring
[U-Boot] [PATCH v2] ARM: move interrupt_init to before relocation Rob Herring
[U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path Marek Vasut
[U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x Sergey Yanovich
[U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x Marek Vasut
[U-Boot] [PATCH v2] at91sam9260ek: move board id setup to config header Andreas Bießmann
[U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux Bo Shen
[U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure Andrew Gabbasov
[U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure Albert ARIBAUD
[U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure Stefan Roese
[U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure Stefan Roese
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT ying.zhang at freescale.com
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Tom Rini
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Zhang Ying-B40530
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Tom Rini
[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Zhang Ying-B40530
[U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode Piotr Wilczek
[U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode Simon Glass
[U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode Minkyu Kang
[U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function Simon Glass
[U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function Simon Glass
[U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function Wolfgang Denk
[U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function Rajeshwari Birje
[U-Boot] [PATCH V2] exynos: spl: Add a custom spi copy function Rajeshwari Shinde
[U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count Mingkai Hu
[U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count Hu Mingkai-B21284
[U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO Michal Simek
[U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO Michal Simek
[U-Boot] [PATCH V2] input: simplify key_matrix_decode_fdt() Stephen Warren
[U-Boot] [PATCH v2] Makefile: move the common makefile line to public area ying.zhang at freescale.com
[U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Shinde
[U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Simon Glass
[U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Jaehoon Chung
[U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error Andy Fleming
[U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error Bo Shen
[U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error Tom Rini
[U-Boot] [PATCH v2] OMAP4/5: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct Lubomir Popov
[U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct Tom Rini
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver Lubomir Popov
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver menon.nishanth at gmail.com
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver Lubomir Popov
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver menon.nishanth at gmail.com
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver Lubomir Popov
[U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver menon.nishanth at gmail.com
[U-Boot] [PATCH v2] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option Gabor Juhos
[U-Boot] [PATCH V2] powerpc/esdhc: Correct judgement for DATA PIO mode Haijun.Zhang
[U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment Wolfgang Denk
[U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment ying.zhang at freescale.com
[U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment Scott Wood
[U-Boot] [Patch v2] powerpc/pixis: Fix pixis help message York Sun
[U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 Wolfgang Denk
[U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 Scott Wood
[U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store Henrik Nordström
[U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store Simon Glass
[U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store Henrik Nordström
[U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store Simon Glass
[U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S Xie Xiaobo
[U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S Jagan Teki
[U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Jagan Teki
[U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su
[U-Boot] [PATCH V2] spi: exynos: Minimise access to SPI FIFO level Rajeshwari Shinde
[U-Boot] [PATCH V2] spi: exynos: Support word transfers Rajeshwari Shinde
[U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels Dirk Behme
[U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm Dirk Behme
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality ying.zhang at freescale.com
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Scott Wood
[U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality Tom Rini
[U-Boot] [PATCH v2] SPL: Makefile: Build a separate autoconf.mk for SPL Joel A Fernandes
[U-Boot] [PATCH v2] video: add Faraday FTLCDC200 LCD controller support Kuo-Jung Su
[U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor Simon Glass
[U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor Simon Glass
[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2 Piotr Wilczek
[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2 Minkyu Kang
[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2 Piotr Wilczek
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Vadim Bendebury
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Simon Glass
[U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere Tom Rini
[U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements Tom Rini
[U-Boot] [PATCH v3 0/2] cmd_sf: print message support Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v3 0/2] cmd_sf: print message support Tom Rini
[U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2 Piotr Wilczek
[U-Boot] [PATCH v3 0/4] ARM: vexpress: add support for more core tiles Albert ARIBAUD
[U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v3 0/5] consolidate hang() Tom Rini
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Alison Wang
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Benoît Thébaudeau
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Benoît Thébaudeau
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Wang Huan-B18965
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Wang Huan-B18965
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Wang Huan-B18965
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Stefano Babic
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Wang Huan-B18965
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support Stefano Babic
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Heiko Schocher
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Dirk Eibach
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Heiko Schocher
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Piotr Wilczek
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Simon Glass
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework Piotr Wilczek
[U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support Michal Simek
[U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support Tom Rini
[U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable Fabio Estevam
[U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable Marek Vasut
[U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox Sascha Silbe
[U-Boot] [PATCH v3 00/10] MIPS: initial support for emulated Malta board Gabor Juhos
[U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support Kuo-Jung Su
[U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support Tom Rini
[U-Boot] [PATCH v3 01/10] bootstage: Introduce sub-IDs for use with image loading Simon Glass
[U-Boot] [PATCH v3 01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board Gabor Juhos
[U-Boot] [PATCH v3 01/12] mkimage: Put FIT loading in function and tidy error handling Simon Glass
[U-Boot] [PATCH v3 01/12] pmic:max77686: add function to set voltage and mode Piotr Wilczek
[U-Boot] [PATCH v3 01/25] imx: iomux-v3: Add iomux-mx25.h Benoît Thébaudeau
[U-Boot] [PATCH v3 02/10] MIPS: qemu-malta: add reset support Gabor Juhos
[U-Boot] [PATCH v3 02/10] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building Simon Glass
[U-Boot] [PATCH v3 02/12] drivers:power:max77693: add support for new multi function pmic max77693 Piotr Wilczek
[U-Boot] [PATCH v3 02/12] image: Remove remaining #ifdefs in image-fit.c Simon Glass
[U-Boot] [PATCH v3 02/25] imx: mx25pdk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 03/10] image: Introduce fit_image_load() to load images from FITs Simon Glass
[U-Boot] [PATCH v3 03/10] MIPS: qemu-malta: enable flash support Gabor Juhos
[U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support Tom Rini
[U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
[U-Boot] [PATCH v3 03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 Piotr Wilczek
[U-Boot] [PATCH v3 03/12] image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL Simon Glass
[U-Boot] [PATCH v3 03/25] imx: mx25pdk: Fix GPIO assignments Benoît Thébaudeau
[U-Boot] [PATCH v3 04/10] image: Use fit_image_load() to load ramdisk Simon Glass
[U-Boot] [PATCH v3 04/10] MIPS: import gt64120.h header from Linux Gabor Juhos
[U-Boot] [PATCH v3 04/12] i2c:multi_i2c: adapt file to new i2c framework Piotr Wilczek
[U-Boot] [PATCH v3 04/12] image: Split libfdt code into image-fdt.c Simon Glass
[U-Boot] [PATCH v3 04/25] imx: tx25: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 05/10] image: Use fit_image_load() to load FDT Simon Glass
[U-Boot] [PATCH v3 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON Gabor Juhos
[U-Boot] [PATCH v3 05/12] image: Add device tree setup to image library Simon Glass
[U-Boot] [PATCH v3 05/12] power: fix pmic command Piotr Wilczek
[U-Boot] [PATCH v3 05/25] imx: zmx25: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Gabor Juhos
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Daniel Schwierzeck
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Gabor Juhos
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Daniel Schwierzeck
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Tom Rini
[U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support Gabor Juhos
[U-Boot] [PATCH v3 06/10] sandbox: Adjust bootm command to work with sandbox Simon Glass
[U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue Andy Fleming
[U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue Kuo-Jung Su
[U-Boot] [PATCH v3 06/12] arm: Refactor bootm to reduce #ifdefs Simon Glass
[U-Boot] [PATCH v3 06/12] drivers:power:power_i2c: adapt file to new i2c framework Piotr Wilczek
[U-Boot] [PATCH v3 06/25] imx: mx25: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH v3 07/10] image: Use fit_image_load() to load kernel Simon Glass
[U-Boot] [PATCH v3 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses Gabor Juhos
[U-Boot] [PATCH v3 07/12] arm: Use image_setup_linux() instead of local code Simon Glass
[U-Boot] [PATCH v3 07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework Piotr Wilczek
[U-Boot] [PATCH v3 07/17] fdt: Add a parameter to fdt_valid() Jerry Van Baren
[U-Boot] [PATCH v3 07/25] imx: iomux-v3: Add iomux-mx35.h Benoît Thébaudeau
[U-Boot] [PATCH v3 08/10] MIPS: qemu-malta: bring up ethernet Gabor Juhos
[U-Boot] [PATCH v3 08/10] sandbox: image: Adjust FIT image printing to work with sandbox Simon Glass
[U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support Marek Vasut
[U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v3 08/12] drivers:video:s6e8ax0: change data_to_send array to static Piotr Wilczek
[U-Boot] [PATCH v3 08/12] powerpc: Use image_setup_linux() instead of local code Simon Glass
[U-Boot] [PATCH v3 08/25] imx: flea3: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 09/10] bootstage: Remove unused entries related to kernel/ramdisk/fdt load Simon Glass
[U-Boot] [PATCH v3 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code Gabor Juhos
[U-Boot] [PATCH v3 09/12] drivers:lcd: fix unaligned access on lcd Piotr Wilczek
[U-Boot] [PATCH v3 09/12] m68k: Use image_setup_linux() instead of local code Simon Glass
[U-Boot] [PATCH v3 09/17] fdt: Allow fdt command to check and update control FDT Jerry Van Baren
[U-Boot] [PATCH v3 09/25] imx: mx35pdk: Fix WDOG_RST iomux function Benoît Thébaudeau
[U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching Otavio Salvador
[U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching Wolfgang Denk
[U-Boot] [PATCH v3 1/2] cmd_sf: Add print mesg for 'sf erase' command Jagannadha Sutradharudu Teki
[U-Boot] [PATCH V3 1/3] power:battery: add battery support for Trats2 board Piotr Wilczek
[U-Boot] [PATCH v3 1/4] mx31pdk: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Stephen Warren
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Peter Korsgaard
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Stephen Warren
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Peter Korsgaard
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Tom Rini
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Stephen Warren
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Tom Rini
[U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC Tom Warren
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Fabio Estevam
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Wang Huan-B18965
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Alison Wang
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Wang Huan-B18965
[U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Wang Huan-B18965
[U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit Fabio Estevam
[U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit Marek Vasut
[U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit Otavio Salvador
[U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit Marek Vasut
[U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit Fabio Estevam
[U-Boot] [PATCH v3 1/9] fpga: Clean coding style Michal Simek
[U-Boot] [PATCH v3 1/9] i2c: add i2c_core and prepare for new multibus support Heiko Schocher
[U-Boot] [PATCH v3 10/10] MIPS: start.S: emulate REVISION register for qemu-malta Gabor Juhos
[U-Boot] [PATCH v3 10/10] sandbox: image: Create a test for loading FIT images Simon Glass
[U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support Anatolij Gustschin
[U-Boot] [PATCH v3 10/12] samsung: trats2: add support for new board Trats2 Piotr Wilczek
[U-Boot] [PATCH v3 10/12] sparc: Use image_setup_linux() instead of local code Simon Glass
[U-Boot] [PATCH v3 10/17] sandbox: fdt: Support fdt command for sandbox Jerry Van Baren
[U-Boot] [PATCH v3 10/25] imx: mx35pdk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 11/12] board:VCMA9 switch to ne i2c framework Piotr Wilczek
[U-Boot] [PATCH v3 11/12] buildman: Allow conflicting tags to avoid spurious errors Simon Glass
[U-Boot] [PATCH v3 11/17] fdt: Skip checking FDT if the pointer is NULL Jerry Van Baren
[U-Boot] [PATCH v3 11/25] imx: woodburn: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 12/12] board:smdk5250: switch to new i2c framework Piotr Wilczek
[U-Boot] [PATCH v3 12/12] buildman: Produce a sensible error message when branch is missing Simon Glass
[U-Boot] [PATCH v3 12/17] Revert "fdt- Tell the FDT library where the device tree is" Jerry Van Baren
[U-Boot] [PATCH v3 12/25] imx: mx35: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH v3 13/25] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27 Benoît Thébaudeau
[U-Boot] [PATCH v3 14/25] imx: iomux-v3: Add missing definitions to iomux-mx51.h Benoît Thébaudeau
[U-Boot] [PATCH v3 15/25] imx: mx51evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 16/25] imx: mx51_efikamx/sb: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 17/25] imx: vision2: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 18/25] imx: iomux-v3: Add iomux-mx53.h Benoît Thébaudeau
[U-Boot] [PATCH v3 19/25] imx: ima3-mx53: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Benoît Thébaudeau
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Benoît Thébaudeau
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Benoît Thébaudeau
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Marek Vasut
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Benoît Thébaudeau
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Marek Vasut
[U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK Stefano Babic
[U-Boot] [PATCH v3 2/2] cmd_sf: Add print mesgs on sf read/write commands Jagannadha Sutradharudu Teki
[U-Boot] [PATCH v3 2/2] wandboard: Add Boot Splash image with Wandboard logo Otavio Salvador
[U-Boot] [PATCH V3 2/3] i2c:multi_i2c: add new macros I2C_7 and I2C_8 Piotr Wilczek
[U-Boot] [PATCH V3 2/4] mmc: report capacity for the selected partition Stephen Warren
[U-Boot] [PATCH v3 2/4] tx25: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Benoît Thébaudeau
[U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 Wang Huan-B18965
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings Marek Vasut
[U-Boot] [PATCH v3 2/9] fpga: Fix debug message compilation error Michal Simek
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Simon Glass
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Simon Glass
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Daniel Schwierzeck
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 20/25] imx: mx53ard: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 21/25] imx: mx53evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 22/25] imx: mx53loco: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 23/25] imx: mx53smd: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3 Benoît Thébaudeau
[U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3 Stefano Babic
[U-Boot] [PATCH v3 25/25] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
[U-Boot] [PATCH V3 3/3] samsung: trats2: add support for new board Trats2 Piotr Wilczek
[U-Boot] [PATCH v3 3/4] arm: do not compile relocate_code() for SPL builds Albert ARIBAUD
[U-Boot] [PATCH V3 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET Stephen Warren
[U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600 Benoît Thébaudeau
[U-Boot] [PATCH v3 3/7] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v3 3/9] cmd: fpga: Clean coding style Michal Simek
[U-Boot] [PATCH v3 3/9] i2c, soft-i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine Benoît Thébaudeau
[U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH V3 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards Stephen Warren
[U-Boot] [PATCH v3 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v3 4/7] mxs: spl_mem_init: Fix comment about start bit Fabio Estevam
[U-Boot] [PATCH v3 4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c Michal Simek
[U-Boot] [PATCH v3 4/9] i2c, fsl_i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 5/5] lib: consolidate hang() Tom Rini
[U-Boot] [PATCH v3 5/6] arm: mvf600: Add uart support for Vybrid MVF600 Alison Wang
[U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Fabio Estevam
[U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Marek Vasut
[U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Fabio Estevam
[U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Marek Vasut
[U-Boot] [PATCH v3 5/9] fpga: Change the first parameter in fpga_loadbitstream Michal Simek
[U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX Heiko Schocher
[U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX Holger Brunck
[U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX Heiko Schocher
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Alison Wang
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Benoît Thébaudeau
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Benoît Thébaudeau
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Benoît Thébaudeau
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Benoît Thébaudeau
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board Wang Huan-B18965
[U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Marek Vasut
[U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Fabio Estevam
[U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Otavio Salvador
[U-Boot] [PATCH v3 6/9] cmd: fpga: Do not include net.h Michal Simek
[U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable Heiko Schocher
[U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable Holger Brunck
[U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable Heiko Schocher
[U-Boot] [PATCH v3 7/7] mxs: spl_mem_init: Change EMI port priority Fabio Estevam
[U-Boot] [PATCH v3 7/9] fpga: zynq: Add support for loading bitstream Michal Simek
[U-Boot] [PATCH v3 7/9] tegra: i2c: Add function to know about current bus Heiko Schocher
[U-Boot] [PATCH v3 8/9] fpga: Check device name against bitstream name Michal Simek
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework Marc Dietrich
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework Stephen Warren
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework Simon Glass
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework Heiko Schocher
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework Heiko Schocher
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework Stephen Warren
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework Heiko Schocher
[U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework Heiko Schocher
[U-Boot] [PATCH v3 9/9] fpga: Remove all CONFIG_SYS_* fpga related options Michal Simek
[U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support Stefan Roese
[U-Boot] [PATCH v3, batch 3 01/17] common: Update cmd_bdinfo for PPC York Sun
[U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Bo Shen
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Andreas Bießmann
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Andreas Bießmann
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Bo Shen
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux Julius Hemanth P
[U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Tom Rini
[U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Tom Rini
[U-Boot] [PATCH v3] cosmetic: arm: fix comments in arch/arm/lib/crt0.S Masahiro Yamada
[U-Boot] [PATCH v3] fs/ext4: Support device block sizes != 512 bytes Egbert Eich
[U-Boot] [PATCH v3] Makefile: move the common makefile line to public area ying.zhang at freescale.com
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Tom Rini
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Tom Rini
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Tom Rini
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v3] powerpc/mpc85xx: modify the function clear_bss and the end address of the BSS ying.zhang at freescale.com
[U-Boot] [PATCH v4 0/19] Allow images to work on sandbox Simon Glass
[U-Boot] [PATCH v4 0/19] Allow images to work on sandbox Tom Rini
[U-Boot] [PATCH v4 0/19] Allow images to work on sandbox Simon Glass
[U-Boot] [PATCH v4 0/19] Allow images to work on sandbox Tom Rini
[U-Boot] [PATCH v4 0/2] usb: ehci: add Faraday USB EHCI&Gadget support Kuo-Jung Su
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Benoît Thébaudeau
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Benoît Thébaudeau
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Fabio Estevam
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Simon Glass
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Simon Glass
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Albert ARIBAUD
[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances Fabio Estevam
[U-Boot] [PATCH v4 0/7] arm: add Faraday A36x SoC platform support Kuo-Jung Su
[U-Boot] [PATCH v4 0/7] arm: vf610: Add Freescale Vybrid VF610 CPU and VF610TWR board support Alison Wang
[U-Boot] [PATCH v4 0/7] mx23: Make DDR initialization stable Fabio Estevam
[U-Boot] [PATCH v4 00/10] Add Marvell Dove and SolidRun CuBox support Sascha Silbe
[U-Boot] [PATCH v4 00/10] Bring in new I2C framework Heiko Schocher
[U-Boot] [PATCH v4 01/10] ARM: dove: add support for Marvell Dove SoC Sascha Silbe
[U-Boot] [PATCH v4 01/10] i2c: add i2c_core and prepare for new multibus support Heiko Schocher
[U-Boot] [PATCH v4 01/19] env: Fix minor comment typos in cmd_nvedit Simon Glass
[U-Boot] [PATCH v4 02/10] i2c: common changes for multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v4 02/10] usb: ehci-marvell: add support for second USB controller Sascha Silbe
[U-Boot] [PATCH v4 02/19] Add minor updates to README.fdt-control Simon Glass
[U-Boot] [PATCH v4 03/10] GPIO: add gpio driver for Dove SoCs Sascha Silbe
[U-Boot] [PATCH v4 03/10] i2c, soft-i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
[U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support Heiko Schocher
[U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
[U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support Heiko Schocher
[U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
[U-Boot] [PATCH v4 03/19] hash: Add a way to calculate a hash for any algortihm Simon Glass
[U-Boot] [PATCH v4 04/10] i2c, fsl_i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v4 04/10] MMC: sdhci: Add support for dove sdhci Sascha Silbe
[U-Boot] [PATCH v4 04/19] bootstage: Don't build for HOSTCC Simon Glass
[U-Boot] [PATCH v4 05/10] i2c, multibus: get rid of CONFIG_I2C_MUX Heiko Schocher
[U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver Sascha Silbe
[U-Boot] [PATCH v4 05/19] mkimage: Move ARRAY_SIZE to header file Simon Glass
[U-Boot] [PATCH v4 06/10] block: mvsata: add dove include Sascha Silbe
[U-Boot] [PATCH v4 06/10] i2c, multibus, keymile: get rid of EEprom_ivm envvariable Heiko Schocher
[U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration Simon Glass
[U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration Jerry Van Baren
[U-Boot] [PATCH v4 07/10] NET: phy: add 88E1310 PHY initialization Sascha Silbe
[U-Boot] [PATCH v4 07/10] tegra: i2c: Add function to know about current bus Heiko Schocher
[U-Boot] [PATCH v4 07/19] image: Move timestamp #ifdefs to header file Simon Glass
[U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support Sascha Silbe
[U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support Prafulla Wadaskar
[U-Boot] [PATCH v4 08/10] tegra: i2c: Enable new CONFIG_SYS_I2C framework Heiko Schocher
[U-Boot] [PATCH v4 08/19] image: Export fit_check_ramdisk() Simon Glass
[U-Boot] [PATCH v4 09/10] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support Heiko Schocher
[U-Boot] [PATCH v4 09/10] NET: mvgbe: add support for Dove Sascha Silbe
[U-Boot] [PATCH v4 09/19] image: Split FIT code into new image-fit.c Simon Glass
[U-Boot] [PATCH v4 1/1] ARM: Add Seagate GoFlex Home support Albert ARIBAUD
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Marek Vasut
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Marek Vasut
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Marek Vasut
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v4 1/4] mx31pdk: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
[U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610 Alison Wang
[U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610 Benoît Thébaudeau
[U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610 Wang Huan-B18965
[U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610 Stefano Babic
[U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610 Benoît Thébaudeau
[U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit Fabio Estevam
[U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit Marek Vasut
[U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263 Simon Glass
[U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263 Andreas Bießmann
[U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality Prafulla Wadaskar
[U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality Heiko Schocher
[U-Boot] [PATCH v4 10/10] Boards: Add support for SolidRun CuBox Sascha Silbe
[U-Boot] [PATCH v4 10/19] image: Move HOSTCC image code to tools/ Simon Glass
[U-Boot] [PATCH v4 11/19] image: Split hash node processing into its own function Simon Glass
[U-Boot] [PATCH v4 12/19] image: Convert fit_image_hash_set_value() to static, and rename Simon Glass
[U-Boot] [PATCH v4 13/19] image: Rename fit_image_check_hashes() to fit_image_verify() Simon Glass
[U-Boot] [PATCH v4 14/19] image: Move hash checking into its own function Simon Glass
[U-Boot] [PATCH v4 15/19] image: Move error! string to common place Simon Glass
[U-Boot] [PATCH v4 16/19] image: Export fit_conf_get_prop_node() Simon Glass
[U-Boot] [PATCH v4 17/19] image: Rename fit_add_hashes() to fit_add_verification_data() Simon Glass
[U-Boot] [PATCH v4 18/19] image: Rename hash printing to fit_image_print_verification_data() Simon Glass
[U-Boot] [PATCH v4 19/19] sandbox: image: Add support for booting images in sandbox Simon Glass
[U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support Marek Vasut
[U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support Marek Vasut
[U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v4 2/4] tx25: copy SPL directly, not using relocate_code. Albert ARIBAUD
[U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities Kuo-Jung Su
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Alison Wang
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Wang Huan-B18965
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Wang Huan-B18965
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Stefano Babic
[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support Benoît Thébaudeau
[U-Boot] [PATCH v4 2/7] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp Simon Glass
[U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp Joe Hershberger
[U-Boot] [PATCH v4 3/4] arm: do not compile relocate_code() for SPL builds Albert ARIBAUD
[U-Boot] [PATCH v4 3/7] arm: add Faraday interrupt controller support Kuo-Jung Su
[U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY Scott Wood
[U-Boot] [PATCH v4 3/7] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610 Alison Wang
[U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610 Benoît Thébaudeau
[U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions Simon Glass
[U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions Joe Hershberger
[U-Boot] [PATCH v4 4/4] arm: factorize relocate_code routine Albert ARIBAUD
[U-Boot] [PATCH v4 4/7] arm: add Faraday FTTMR010 timer support Kuo-Jung Su
[U-Boot] [PATCH v4 4/7] arm: vf610: Add watchdog support for Vybrid VF610 Alison Wang
[U-Boot] [PATCH v4 4/7] mxs: spl_mem_init: Fix comment about start bit Fabio Estevam
[U-Boot] [PATCH v4 4/9] main: Move boot_delay code into its own function Simon Glass
[U-Boot] [PATCH v4 5/7] arm: add Faraday FTPWMTMR010 timer support Kuo-Jung Su
[U-Boot] [PATCH v4 5/7] arm: vf610: Add uart support for Vybrid VF610 Alison Wang
[U-Boot] [PATCH v4 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Fabio Estevam
[U-Boot] [PATCH v4 5/9] main: Use get/setenv_ulong() Simon Glass
[U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility Kuo-Jung Su
[U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document Alison Wang
[U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document Benoît Thébaudeau
[U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Marek Vasut
[U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Fabio Estevam
[U-Boot] [PATCH v4 6/9] main: Fix typos and checkpatch warnings in command line reading Simon Glass
[U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support Kuo-Jung Su
[U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board Alison Wang
[U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board Benoît Thébaudeau
[U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board Wang Huan-B18965
[U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board Benoît Thébaudeau
[U-Boot] [PATCH v4 7/7] mxs: spl_mem_init: Change EMI port priority Fabio Estevam
[U-Boot] [PATCH v4 7/9] main: Correct header order Simon Glass
[U-Boot] [PATCH v4 8/9] main: Add debug_parser() to avoid #ifdefs Simon Glass
[U-Boot] [PATCH v4 9/9] main: Add debug_bootkeys to avoid #ifdefs Simon Glass
[U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH V4] ARM: OMAP: I2C: New read, write and probe functions Lubomir Popov
[U-Boot] [PATCH v4] common/Makefile: Add new symbol CONFIG_SPL_ENV_xxx for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Ch
[U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support Heiko Schocher
[U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support Naveen Krishna Ch
[U-Boot] [PATCH v4] mmc: update Faraday FTSDC010 for rw performance Kuo-Jung Su
[U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
[U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
[U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support Scott Wood
[U-Boot] [PATCH v4] net: add Faraday FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
[U-Boot] [PATCH v4] net: update FTGMAC100 for MMU/D-cache support Kuo-Jung Su
[U-Boot] [PATCH v4] spi: add Faraday FTSPI010 SPI controller support Kuo-Jung Su
[U-Boot] [PATCH v5 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
[U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250 Hung-ying Tyan
[U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable Fabio Estevam
[U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable Marek Vasut
[U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable Stefano Babic
[U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable Marek Vasut
[U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v5 1/7] cros: add cros_ec driver Hung-ying Tyan
[U-Boot] [PATCH v5 1/7] cros: add cros_ec driver Simon Glass
[U-Boot] [PATCH v5 1/7] mx23: Fix pad voltage selection bit Fabio Estevam
[U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Marek Vasut
[U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec Hung-ying Tyan
[U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec Simon Glass
[U-Boot] [PATCH v5 2/7] mx23evk: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v5 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey Simon Glass
[U-Boot] [PATCH v5 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec Simon Glass
[U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec Hung-ying Tyan
[U-Boot] [PATCH v5 3/7] mx23_olinuxino: Fix DDR pin iomux settings Fabio Estevam
[U-Boot] [PATCH v5 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec Hung-ying Tyan
[U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec Simon Glass
[U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec Simon Glass
[U-Boot] [PATCH v5 4/7] mxs: spl_mem_init: Fix comment about start bit Fabio Estevam
[U-Boot] [PATCH v5 5/7] Add Atmel I2C tpm Simon Glass
[U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver Hung-ying Tyan
[U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver Simon Glass
[U-Boot] [PATCH v5 5/7] mxs: spl_mem_init: Remove erroneous DDR setting Fabio Estevam
[U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts Simon Glass
[U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts Hung-ying Tyan
[U-Boot] [PATCH v5 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers Fabio Estevam
[U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250 Simon Glass
[U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250 Hung-ying Tyan
[U-Boot] [PATCH v5 7/7] mxs: spl_mem_init: Change EMI port priority Fabio Estevam
[U-Boot] [PATCH v5] Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board Stefano Babic
[U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH v5] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
[U-Boot] [PATCH v5] nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
[U-Boot] [PATCH v6 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
[U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable Marek Vasut
[U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Marek Vasut
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Marek Vasut
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Marek Vasut
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Marek Vasut
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
[U-Boot] [PATCH v6 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v6 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board SARTRE Leo
[U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board Otavio Salvador
[U-Boot] [PATCH v7 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
[U-Boot] [PATCH v7 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v7 2/4] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
[U-Boot] [PATCH v7 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v7 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v8 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
[U-Boot] [PATCH v8 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
[U-Boot] [PATCH v8 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v8 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v9 0/5] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
[U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot Simon Glass
[U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot Rajeshwari Birje
[U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot Rajeshwari Birje
[U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot Simon Glass
[U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access Kuo-Jung Su
[U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access Marek Vasut
[U-Boot] [PATCH v9 2/5] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
[U-Boot] [PATCH v9 3/5] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
[U-Boot] [PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues Jaehoon Chung
[U-Boot] [PATCH v9 4/5] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
[U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support Marek Vasut
[U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
[U-Boot] [PATCH V9 7/9] MMC: APIs to support resize of EMMC boot partition Michael Pratt
[U-Boot] [PATCH] .gitignore: add GNU GLOBAL files Masahiro Yamada
[U-Boot] [PATCH] .gitignore: add GNU GLOBAL files Wolfgang Denk
[U-Boot] [PATCH] .gitignore: add GNU GLOBAL files Masahiro Yamada
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. SARTRE Leo
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. SARTRE Leo
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. Wolfgang Denk
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. Stefano Babic
[U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. Eric Bénard
[U-Boot] [PATCH] Add splash screen support via loading from flash Wolfgang Denk
[U-Boot] [PATCH] Add splash screen support via loading from flash Robert Winkler
[U-Boot] [PATCH] Add splash screen support via loading from flash Wolfgang Denk
[U-Boot] [PATCH] Add splash screen support via loading from flash Robert Winkler
[U-Boot] [PATCH] Add splash screen support via loading from flash Robert Winkler
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code ying.zhang at freescale.com
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code Andy Fleming
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code Tom Rini
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code Scott Wood
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code Zhang Ying-B40530
[U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code Tom Rini
[U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file Rob Herring
[U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file Tom Rini
[U-Boot] [PATCH] arm/km: fix u-boot update functionality Holger Brunck
[U-Boot] [PATCH] arm/km: fix u-boot update functionality Heiko Schocher
[U-Boot] [PATCH] arm/km: fix u-boot update functionality Prafulla Wadaskar
[U-Boot] [PATCH] arm/km: make local functions static Holger Brunck
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Marek Vasut
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Axel Lin
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Albert ARIBAUD
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Stephen Warren
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Axel Lin
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Axel Lin
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Stephen Warren
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Tom Warren
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Albert ARIBAUD
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit Tom Warren
[U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses Gabbasov, Andrew
[U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Marek Vasut
[U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Gabbasov, Andrew
[U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections Albert ARIBAUD
[U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections Tom Rini
[U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections Albert ARIBAUD
[U-Boot] [PATCH] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH] arm: fix a comment Benoît Thébaudeau
[U-Boot] [PATCH] arm: fix a comment Masahiro Yamada
[U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration Marek Vasut
[U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration Stefano Babic
[U-Boot] [PATCH] arm: pxa: Add support for ICP DAS LP-8x4x Сергей Янович
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Sergey Yanovich
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Marek Vasut
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram Mike Dunn
[U-Boot] [PATCH] ARM: tegra: only enable SCU on Tegra20 Stephen Warren
[U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 Piotr Wilczek
[U-Boot] [PATCH] avr32: fix relocation address calculation Andreas Bießmann
[U-Boot] [PATCH] avr32: fix relocation address calculation Albert ARIBAUD
[U-Boot] [PATCH] avr32: fix relocation address calculation Andreas Bießmann
[U-Boot] [PATCH] avr32: fix relocation address calculation Albert ARIBAUD
[U-Boot] [PATCH] avr32: fix relocation address calculation Michael Cashwell
[U-Boot] [PATCH] avr32: fix relocation address calculation Albert ARIBAUD
[U-Boot] [PATCH] avr32: fix relocation address calculation Andreas Bießmann
[U-Boot] [PATCH] avr32: fix relocation address calculation Albert ARIBAUD
[U-Boot] [PATCH] avr32: fix relocation address calculation Albert ARIBAUD
[U-Boot] [PATCH] board/b4860qds: Relax NOR flash teadc timing parameter Prabhakar Kushwaha
[U-Boot] [PATCH] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define Prabhakar Kushwaha
[U-Boot] [PATCH] buildman: Allow make flags to be specified for each board Simon Glass
[U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions Anatolij Gustschin
[U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions Eric Nelson
[U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program Masahiro Yamada
[U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program Masahiro Yamada
[U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program Stefan Roese
[U-Boot] [PATCH] cmd_mem: fix cp command Masahiro Yamada
[U-Boot] [PATCH] cmd_mem: fix cp command Tom Rini
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT ying.zhang at freescale.com
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Wolfgang Denk
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Scott Wood
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Scott Wood
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Scott Wood
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Stefan Roese
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Scott Wood
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Tom Rini
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Scott Wood
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Zhang Ying-B40530
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT Tom Rini
[U-Boot] [PATCH] common: board_f: Do not call board_postclk_init twice Masahiro Yamada
[U-Boot] [PATCH] da830: add MMC support Vishwanathrao Badarkhe, Manish
[U-Boot] [PATCH] da830: add MMC support Vishwanathrao Badarkhe, Manish
[U-Boot] [PATCH] da830: add MMC support Tom Rini
[U-Boot] [PATCH] da830: add MMC support Vishwanathrao Badarkhe, Manish
[U-Boot] [PATCH] da830: add MMC support Tom Rini
[U-Boot] [PATCH] disk: Fix possible out-of-bounds access in part_efi.c Marek Vasut
[U-Boot] [PATCH] drivers/mmc: move spl_mmc.c to common/spl ying.zhang at freescale.com
[U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd Piotr Wilczek
[U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd Wolfgang Denk
[U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd Jeroen Hofstee
[U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd Piotr Wilczek
[U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd Nikita Kiryanov
[U-Boot] [PATCH] drivers:power:max77693: add support for new multi function pmic max77693 Piotr Wilczek
[U-Boot] [PATCH] drivers:video:s6e8ax0: change data_to_send array to static Piotr Wilczek
[U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it Stephen Warren
[U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it Tom Rini
[U-Boot] [PATCH] Exynos5: clock: Update the equation to calculate PLL output frequency Minkyu Kang
[U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v Simon Glass
[U-Boot] [PATCH] exynos: Enable mmc for snow Simon Glass
[U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c Simon Glass
[U-Boot] [PATCH] EXYNOS: SPI: Minimise access to SPI FIFO level Simon Glass
[U-Boot] [PATCH] EXYNOS: SPI: Support word transfers Simon Glass
[U-Boot] [PATCH] EXYNOS: SPL: Add a custom spi copy function Simon Glass
[U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo Minkyu Kang
[U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree Simon Glass
[U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Tom Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Simon Glass
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Wolfgang Denk
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Simon Glass
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Simon Glass
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Simon Glass
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Simon Glass
[U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men Stephen Warren
[U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet() Stephen Warren
[U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet() Michael Trimarchi
[U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet() Stephen Warren
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Vadim Bendebury
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Tom Rini
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Doug Anderson
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Doug Anderson
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Tom Rini
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Doug Anderson
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Tom Rini
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Doug Anderson
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Tom Rini
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Jerry Van Baren
[U-Boot] [PATCH] Fix device detection for API consumers Ilya Bakulin
[U-Boot] [PATCH] Fix device detection for API consumers Jeroen Hofstee
[U-Boot] [PATCH] Fix references to the documentation files Stefano Babic
[U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices Marek Vasut
[U-Boot] [PATCH] Generalize "cls" command Anatolij Gustschin
[U-Boot] [PATCH] generic_board: reduce the redundancy of gd_t struct members Masahiro Yamada
[U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO Benoît Thébaudeau
[U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO Stefano Babic
[U-Boot] [PATCH] imx: spl: Merge libimx-common make rules Benoît Thébaudeau
[U-Boot] [PATCH] imx: spl: Merge libimx-common make rules Stefano Babic
[U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt() Stephen Warren
[U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt() Simon Glass
[U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt() Wolfgang Denk
[U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt() Simon Glass
[U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt() Stephen Warren
[U-Boot] [PATCH] input: simplify key_matrix_decode_fdt() Stephen Warren
[U-Boot] [PATCH] input: simplify key_matrix_decode_fdt() Simon Glass
[U-Boot] [PATCH] input: simplify key_matrix_decode_fdt() Stephen Warren
[U-Boot] [PATCH] itest: Add bitwise and operator Eric Nelson
[U-Boot] [PATCH] itest: Add bitwise and operator Wolfgang Denk
[U-Boot] [PATCH] itest: Add bitwise and operator Eric Nelson
[U-Boot] [PATCH] lcd: align bmp header when uncopmressing image Piotr Wilczek
[U-Boot] [PATCH] lcd: align bmp header when uncopmressing image Wolfgang Denk
[U-Boot] [PATCH] Makefile: move the common makefile line out of the CONFIG_SPL_BUILD ifdef ying.zhang at freescale.com
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument Wolfgang Denk
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument Wolfgang Denk
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument Luka Perkov
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument Luka Perkov
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument Luka Perkov
[U-Boot] [PATCH] mmc and fat bug fixes Ruud Commandeur
[U-Boot] [PATCH] mmc and fat bug fixes Benoît Thébaudeau
[U-Boot] [PATCH] mmc and fat bug fixes Andy Fleming
[U-Boot] [PATCH] mmc and fat bug fixes Tom Rini
[U-Boot] [PATCH] mmc and fat bug fixes Wolfgang Denk
[U-Boot] [PATCH] mmc and fat bug fixes Ruud Commandeur
[U-Boot] [PATCH] mmc and fat bug fixes Ruud Commandeur
[U-Boot] [PATCH] mmc and fat bug fixes Andy Fleming
[U-Boot] [PATCH] mmc write bug fix Ruud Commandeur
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Shinde
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Alim Akhtar
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jagan Teki
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jaehoon Chung
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jaehoon Chung
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jagan Teki
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Birje
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jaehoon Chung
[U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation Jagan Teki
[U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error Michael Heimpold
[U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error Bo Shen
[U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error Bo Shen
[U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command Fabio Estevam
[U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command Otavio Salvador
[U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command Fabio Estevam
[U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command Fleming Andy-AFLEMING
[U-Boot] [PATCH] mpc512x: remove dead code Wolfgang Denk
[U-Boot] [PATCH] mpc5200: a3m071/a4m2k: Enable flash verify option Wolfgang Denk
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Jagan Teki
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Jagan Teki
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Jagan Teki
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su
[U-Boot] [PATCH] mx23: Add a README file Fabio Estevam
[U-Boot] [PATCH] mx23: Add a README file Marek Vasut
[U-Boot] [PATCH] mx23: Add a README file Otavio Salvador
[U-Boot] [PATCH] mx27: add function enable_caches Philippe Reynes
[U-Boot] [PATCH] mx27: add i2c clock Philippe Reynes
[U-Boot] [PATCH] mx27: add missing constant for mx27 Philippe Reynes
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Andrew Gabbasov
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Dirk Behme
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Gabbasov, Andrew
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Dirk Behme
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Gabbasov, Andrew
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select Gabbasov, Andrew
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal Andrew Gabbasov
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal Robert Winkler
[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal Dirk Behme
[U-Boot] [PATCH] mx6slevk: Allow booting a device tree kernel Fabio Estevam
[U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured Stefano Babic
[U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured Fabio Estevam
[U-Boot] [PATCH] nds32: Use sections header to obtain link symbols Macpaul Lin
[PATCH] omap-ulpi: Fix the omap3/4 access function to the bus Michael Trimarchi
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Tom Rini
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Tom Rini
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Sricharan R
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Sricharan R
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Sricharan R
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Tom Rini
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Tom Rini
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Lubomir Popov
[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based) Tom Rini
[U-Boot] [PATCH] OMAP5: Enable access to auxclk registers Lubomir Popov
[U-Boot] [PATCH] OMAP5: Fix bug in omap5_es1_prcm struct Lubomir Popov
[U-Boot] [PATCH] OMAP5: uEVM: Fix pinmux for USB support Lubomir Popov
[U-Boot] [PATCH] OpenRD: relocate environment to 640kB Sascha Silbe
[U-Boot] [PATCH] p1020rdb-pd: platform support Scott Wood
[U-Boot] [PATCH] P1022DS: Set CONFIG_SPL_MAX_SIZE directly Tom Rini
[U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option Daniel Schwierzeck
[U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option Gabor Juhos
[U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option Gabor Juhos
[U-Boot] [PATCH] post: new parallel nor flash test Mathieu Clavette
[U-Boot] [PATCH] powerpc/c29xpcie: add readme document for c29xpcie Po Liu
[U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Chris Packham
[U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Xie Shaohui-B21989
[U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Chris Packham
[U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K Xie Shaohui-B21989
[U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode Andy Fleming
[U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode Haijun.Zhang
[U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode Zhang Haijun-B42677
[U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency for mpic node Wang Dongsheng-B40534
[U-Boot] [PATCH] powerpc/mpc85xx: support application without resetvec segment in the linker script ying.zhang at freescale.com
[U-Boot] [PATCH] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment ying.zhang at freescale.com
[U-Boot] [PATCH] powerpc/mpc85xx: work around erratum A-006593 Scott Wood
[U-Boot] [PATCH] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD Card with SPL ying.zhang at freescale.com
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL Scott Wood
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL Zhang Ying-B40530
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL Scott Wood
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL Zhang Ying-B40530
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL Scott Wood
[U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL ying.zhang at freescale.com
[U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards Shaohui Xie
[U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards Shaohui Xie
[U-Boot] [PATCH] powerpc/pixis: Fix pixis help message York Sun
[U-Boot] [PATCH] powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE Axel Lin
[U-Boot] [PATCH] ppc: ppmc7xx: Fix possible out-of-bound access Marek Vasut
[U-Boot] [PATCH] README: Correct reference for CONFIG_SUPPORT_RAW_INITRD Tom Rini
[U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect stefano babic
[U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect Albert ARIBAUD
[U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect Albert ARIBAUD
[U-Boot] [PATCH] sandbox: block driver using host file/device as backing store Henrik Nordström
[U-Boot] [PATCH] sandbox: block driver using host file/device as backing store Simon Glass
[U-Boot] [PATCH] sandbox: block driver using host file/device as backing store Henrik Nordström
[U-Boot] [PATCH] SF: Add Spansion S25FL064P IDs Jagan Teki
[U-Boot] [PATCH] sf: spansion: Add support for S25FL128S Jagan Teki
[U-Boot] [PATCH] smc911x: fix the timeout detection Masahiro Yamada
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Troy Kisky
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Dirk Behme
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Troy Kisky
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Dirk Behme
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Troy Kisky
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation Dirk Behme
[U-Boot] [PATCH] SPI: Winbond: Add W25Q32 to spi flash table Jagan Teki
[U-Boot] [PATCH] tegra: always build u-boot-nodtb-tegra.bin Stephen Warren
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Allen Martin
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Simon Glass
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Tom Warren
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Allen Martin
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Allen Martin
[U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks Tom Warren
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Mats Kärrman
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Michael Heimpold
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Wolfgang Denk
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Michael Heimpold
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Michael Heimpold
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored Mark Jackson
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Jonas Gorski
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Wolfgang Denk
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Wolfgang Denk
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Wolfgang Denk
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Peter Korsgaard
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Jonas Gorski
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size Jonas Gorski
[PATCH] Update doc/README.ubi to add description of accessing ubi filesystems. Paul B. Henson
[PATCH] Update doc/README.ubi to add description of accessing ubi filesystems. Paul B. Henson
[U-Boot] [PATCH] usb: asix: Move software resets to basic_init Simon Glass
[U-Boot] [PATCH] usb: asix: Move software resets to basic_init Marek Vasut
[U-Boot] [PATCH] usb: asix: Move software resets to basic_init Joe Hershberger
[U-Boot] [PATCH] usb: asix: Move software resets to basic_init Marek Vasut
[U-Boot] [PATCH] usb: ehci: add missing cache managment Stephen Warren
[U-Boot] [PATCH] usb: ehci: add missing cache managment Marek Vasut
[U-Boot] [PATCH] video: exynos: Change mipi dsi write function parameters correctly Donghwa Lee
[U-Boot] [PATCH] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data() Donghwa Lee
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Tapani Utriainen
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Fabio Estevam
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Otavio Salvador
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Otavio Salvador
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Tapani Utriainen
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Tapani Utriainen
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Stefano Babic
[U-Boot] [PATCH] Wandboard: Add support for Wandboard quad Otavio Salvador
[U-Boot] [PATCH] wandboard: fix typo in README Luka Perkov
[U-Boot] [PATCHv2 0/6] Falcon boot mode for spl_mmc Peter Korsgaard
[U-Boot] [PATCHv2 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging Peter Korsgaard
[U-Boot] [PATCHv2 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out Peter Korsgaard
[U-Boot] [PATCHv2 3/6] spl_mmc: add Falcon mode support for FAT variant Peter Korsgaard
[U-Boot] [PATCHv2 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument Peter Korsgaard
[U-Boot] [PATCHv2 5/6] spl_mmc: add Falcon mode support for raw variant Peter Korsgaard
[U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand Peter Korsgaard
[U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand Peter Korsgaard
[U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand Tom Rini
[U-Boot] [PATCHv3 0/6] Falcon boot mode for spl_mmc Peter Korsgaard
[U-Boot] [PATCHv3 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging Peter Korsgaard
[U-Boot] [PATCHv3 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out Peter Korsgaard
[U-Boot] [PATCHv3 3/6] spl_mmc: add Falcon mode support for FAT variant Peter Korsgaard
[U-Boot] [PATCHv3 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument Peter Korsgaard
[U-Boot] [PATCHv3 5/6] spl_mmc: add Falcon mode support for raw variant Peter Korsgaard
[U-Boot] [PATCHv3 6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand Peter Korsgaard
[U-Boot] [PULL] : Please pull u-boot-imx Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction Stefano Babic
[U-Boot] [PULL] : Please pull u-boot-imx - correction Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-imx - correction done Albert ARIBAUD
[U-Boot] [PULL] : Please pull u-boot-mpc5xxx Wolfgang Denk
[U-Boot] [PULL] : Please pull u-boot-mpc5xxx Tom Rini
[U-Boot] [PULL] please pull u-boot-atmel/master Andreas Bießmann
[U-Boot] [PULL] please pull u-boot-atmel/master Albert ARIBAUD
[U-Boot] [PULL] please pull u-boot-atmel/master Andreas Bießmann
[U-Boot] [PULL] please pull u-boot-atmel/master Albert ARIBAUD
[U-Boot] [PULL] please pull u-boot-avr32/master Andreas Bießmann
[U-Boot] [PULL] please pull u-boot-avr32/master Tom Rini
[U-Boot] [PULL] u-boot-pxa.git/master Marek Vasut
[U-Boot] [PULL] u-boot-pxa.git/master Tom Rini
[U-Boot] [PULL] u-boot-pxa.git/master Marek Vasut
[U-Boot] [PULL] u-boot-pxa.git/master Albert ARIBAUD
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot Simon Glass
[U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot Tom Rini
[U-Boot] [RFC PATCH 0/7] RFC: Add Kbuild system to U-Boot Simon Glass
[U-Boot] [RFC PATCH 1/7] Add some required Kconfig files Simon Glass
[U-Boot] [RFC PATCH 2/7] arm: Allow start.o to come from any directory Simon Glass
[U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently Simon Glass
[U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently Tom Rini
[U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch Andre Przywara
[U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch Christoffer Dall
[U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material Masahiro Yamada
[U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material Simon Glass
[U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material Masahiro Yamada
[U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material Tom Rini
[U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material Simon Glass
[U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot Masahiro Yamada
[U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot Tom Rini
[U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot Masahiro Yamada
[U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot Tom Rini
[U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot Simon Glass
[U-Boot] [RFC PATCH 6/7] Enable Kconfig for U-Boot Simon Glass
[U-Boot] [RFC PATCH 7/7] Switch over to Kbuild Simon Glass
[U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO Simon Glass
[U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO Simon Glass
[U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO Marek Vasut
[U-Boot] [RFC PATCH v2 01/14] sandbox: Make map_to_sysmem() use a constant pointer Simon Glass
[U-Boot] [RFC PATCH v2 02/14] sandbox: Correct data sizes and printf() strings in fdtdec.c Simon Glass
[U-Boot] [RFC PATCH v2 03/14] sandbox: config: Don't use 64-bit physical memory Simon Glass
[U-Boot] [RFC PATCH v2 04/14] Add cmd_process_error() to report and process errors Simon Glass
[U-Boot] [RFC PATCH v2 05/14] sandbox: config: Enable driver model Simon Glass
[U-Boot] [RFC PATCH v2 06/14] dm: Add base driver model support Simon Glass
[U-Boot] [RFC PATCH v2 07/14] dm: Set up driver model after relocation Simon Glass
[U-Boot] [RFC PATCH v2 08/14] dm: Add basic tests Simon Glass
[U-Boot] [RFC PATCH v2 09/14] dm: Add a 'dm' command for testing Simon Glass
[U-Boot] [RFC PATCH v2 10/14] dm: Add a demonstration/example driver Simon Glass
[U-Boot] [RFC PATCH v2 11/14] dm: Add GPIO support and tests Simon Glass
[U-Boot] [RFC PATCH v2 12/14] sandbox: Convert GPIOs to use driver model Simon Glass
[U-Boot] [RFC PATCH v2 13/14] dm: Enable gpio command to support driver model Simon Glass
[U-Boot] [RFC PATCH v2 14/14] dm: Add README for driver model Simon Glass
[U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32 Måns Rullgård
[U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32 Dirk Behme
[U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32 Wolfgang Denk
[U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32 Dirk Behme
[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables Michal Simek
[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables Albert ARIBAUD
[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables Michal Simek
[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables Albert ARIBAUD
[U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx Andy Fleming
[U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx Valentin Longchamp
[U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx Valentin Longchamp
[U-Boot] [RFC PATCH] patman: Do not hardcode python path Michal Simek
[U-Boot] [RFC PATCH] patman: Do not hardcode python path Tom Rini
[U-Boot] [RFC PATCH] patman: Do not hardcode python path Simon Glass
[U-Boot] [RFC PATCH] patman: Do not hardcode python path Simon Glass
[U-Boot] [SOLVED] Re: Your message to U-Boot awaits moderator approval Michael Heimpold
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Lennart Poettering
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Lucas De Marchi
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Jeremiah Foster
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Mehaffey, John
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Lennart Poettering
[U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot Mehaffey, John
[U-Boot] [U-BOOT PATCH 0/6] sf: spansion|winbond: ID table corrections/updates Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 1/6] sf: spansion: Update the name for S25FL256S flash Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 2/6] sf: winbond: Add support for W25Q80BW Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 3/6] sf: winbond: Correct the nr_blocks used for W25Q32DW Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 4/6] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 5/6] sf: winbond: Add support for W25Q128FW Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH 6/6] sf: winbond: Add support for W25Q16DW Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes Jagan Teki
[U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes Simon Glass
[U-Boot] [U-Boot, v2] disk/part_dos: check harder for partition table Tom Rini
[U-Boot] [U-Boot, v2] env: throw an error when an empty key is used Tom Rini
[U-Boot] [U-Boot, v2] sf: winbond: Add support for W25PXX SPI flash Jagan Teki
[U-Boot] [U-Boot, v3] fs/ext4: Support device block sizes != 512 bytes Tom Rini
[U-Boot] [U-Boot, 2/2] arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card Andreas Bießmann
[U-Boot] [U-Boot, v2, 2/4] fs/fat: Don't multiply fatsize with sector size Tom Rini
[U-Boot] [U-Boot, v2, 1/4] disk/iso: Add Support for block sizes > 512 byte to ISO partition support Tom Rini
[U-Boot] [U-Boot, v2, 3/4] part/dev_desc: Add log2 of blocksize to block_dev_desc data struct Tom Rini
[U-Boot] [U-Boot, v2] disk/gpt: Fix GPT partition handling for blocksize != 512 Tom Rini
[U-Boot] [U-Boot, v3, 01/12] mkimage: Put FIT loading in function and tidy error handling Tom Rini
[U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt Andreas Bießmann
[U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt Andreas Bießmann
[U-Boot] [U-Boot, v4] bootm: Avoid 256-byte overflow in fixup_silent_linux() Tom Rini
[U-Boot] [U-Boot,1/2] arm: at91: enable mci support for at91sam9g20ek. Andreas Bießmann
[U-Boot] [U-Boot,1/2] mmc: atmel_mci: using IP version for different setting Andreas Bießmann
[U-Boot] [U-Boot,1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register Andreas Bießmann
[U-Boot] [U-Boot,1/3] ARM: at91: fix and update README.at91 document Andreas Bießmann
[U-Boot] [U-Boot,2/2] mmc: atmel_mci: add mmc card support Andreas Bießmann
[U-Boot] [U-Boot,2/3] ARM: at91: add at91sam9x5 and sama5d3x information Andreas Bießmann
[U-Boot] [U-Boot,2/3] USB: ohci-at91: support sama5d3x devices Andreas Bießmann
[U-Boot] [U-Boot,3/3] ARM: at91: add NAND partition table and index Andreas Bießmann
[U-Boot] [U-Boot,3/3] ARM: atmel: add sama5d3xek support Andreas Bießmann
[U-Boot] [U-Boot,4/4] sf: winbond: Add support for W25Q256 Jagan Teki
[U-Boot] [U-Boot,v2] at91sam9260ek: move board id setup to config header Andreas Bießmann
[U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command Tom Rini
[U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command Scott Wood
[U-Boot] [U-Boot,v2] mtd: resync with Linux-3.7.1 Scott Wood
[U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition Andreas Bießmann
[U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition Andreas Bießmann
[U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support Andreas Bießmann
[U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support Andreas Bießmann
[U-Boot] [u-boot-mips] gp init and -pie option Jason Harris
[U-Boot] [u-boot-mips] gp init and -pie option Jason Harris
[U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree Vishwanathrao Badarkhe, Manish
[U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards Jagannadha Sutradharudu Teki
[U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards Jagan Teki
[U-Boot] [U-boot]: MMC: add sdhci generic framework Jagannadha Sutradharudu Teki
[U-Boot] [U-boot]: MMC: add sdhci generic framework Rommel Custodio
[U-Boot] [U-boot]: MMC: add sdhci generic framework Jagan Teki
[U-Boot] [v2] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] [v2] Please pull u-boot-mpc85xx.git Tom Rini
[U-Boot] [v2] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] [v3] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] [v3] Please pull u-boot-mpc85xx.git Tom Rini
[U-Boot] about uboot leads to LAN disconnected wanghgsz
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM v7: Flush icache when executing a program with go Albert ARIBAUD
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM v7: Flush icache when executing a program with go Albert ARIBAUD
[U-Boot] ARM v7: Flush icache when executing a program with go Tom Rini
[U-Boot] ARM v7: Flush icache when executing a program with go Albert ARIBAUD
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM v7: Flush icache when executing a program with go Wolfgang Denk
[U-Boot] ARM v7: Flush icache when executing a program with go Tom Rini
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM v7: Flush icache when executing a program with go Wolfgang Denk
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM v7: Flush icache when executing a program with go Kuo-Jung Su
[U-Boot] ARM v7: Flush icache when executing a program with go Wolfgang Denk
[U-Boot] ARM v7: Flush icache when executing a program with go Wolfgang Denk
[U-Boot] ARM v7: Flush icache when executing a program with go Kees Jongenburger
[U-Boot] ARM v7: Flush icache when executing a program with go Albert ARIBAUD
[U-Boot] ARM v7: Flush icache when executing a program with go Henrik Nordström
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Masahiro Yamada
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Marek Vasut
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Masahiro Yamada
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Marek Vasut
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Albert ARIBAUD
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Gabbasov, Andrew
[U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure Gabbasov, Andrew
[U-Boot] avr32: fix relocation address calculation Andreas Bießmann
[U-Boot] avr32: fix relocation address calculation Andreas Bießmann
[U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed) Alexander Graf
[U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed) Alexander Graf
[U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed) Wolfgang Denk
[U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed) Alexander Graf
[U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed) Tom Rini
[U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h Matt Thomas
[U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h Tom Rini
[U-Boot] Booting u-boot for versatile in qemu fails Thierry Bultel
[U-Boot] Booting u-boot for versatile in qemu fails Albert ARIBAUD
[U-Boot] Booting u-boot for versatile in qemu fails Thierry Bultel
[U-Boot] Booting u-boot for versatile in qemu fails Albert ARIBAUD
[U-Boot] bug regarding ext4 filesystem ScottyYi at s3graphics.com
[U-Boot] build: Pull -DBUILD_TAG into separate ifdef Tom Rini
[U-Boot] Building two different "SPL" for the same board? Henrik Nordström
[U-Boot] Building two different "SPL" for the same board? Tom Rini
[U-Boot] Building two different "SPL" for the same board? Henrik Nordström
[U-Boot] Building two different "SPL" for the same board? Tom Rini
[U-Boot] Building two different "SPL" for the same board? Henrik Nordström
[U-Boot] Building two different "SPL" for the same board? Albert ARIBAUD
[U-Boot] Building two different "SPL" for the same board? Tom Rini
[U-Boot] Building two different "SPL" for the same board? Henrik Nordström
[U-Boot] CAN framework in U-Boot Bhupesh SHARMA
[U-Boot] CAN framework in U-Boot Wolfgang Grandegger
[U-Boot] CAN framework in U-Boot Bhupesh SHARMA
[U-Boot] CAN framework in U-Boot Wolfgang Grandegger
[U-Boot] Can not get linux prompt using sandbox Christian Hyep
[U-Boot] cfb_console and dcache on i.MX6 Eric Nelson
[U-Boot] cfb_console and dcache on i.MX6 Anatolij Gustschin
[U-Boot] Compiling U-BOOT bootloader on x86 Ravi Kant Tiwari
[U-Boot] Compiling U-BOOT bootloader on x86 ravi tiwari
[U-Boot] Compiling U-BOOT bootloader on x86 Wolfgang Denk
[U-Boot] Compiling U-BOOT bootloader on x86 ravi tiwari
[U-Boot] Compiling U-BOOT bootloader on x86 Wolfgang Denk
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Albert ARIBAUD
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Tom Rini
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Bo Shen
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Albert ARIBAUD
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Simon Glass
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Albert ARIBAUD
[U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge Simon Glass
[U-Boot] da850-evm: MMC-SD query Manish Badarkhe
[U-Boot] da850-evm: MMC-SD query Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Lukasz Majewski
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Benoît Thébaudeau
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Benoît Thébaudeau
[U-Boot] dfu: dfu and UBI Volumes Pantelis Antoniou
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Wolfgang Denk
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] dfu: dfu and UBI Volumes Heiko Schocher
[U-Boot] dfu: dfu and UBI Volumes Tom Rini
[U-Boot] disassembler ? Brad Walker
[U-Boot] disassembler ? Albert ARIBAUD
[U-Boot] disassembler ? Wolfgang Denk
[U-Boot] disassembler ? Brad Walker
[U-Boot] disassembler ? Albert ARIBAUD
[U-Boot] disassembler ? Peter Barada
[U-Boot] disassembler ? Albert ARIBAUD
[U-Boot] disassembler ? Peter Barada
[U-Boot] disassembler ? Wolfgang Denk
[U-Boot] Displaying characters on the display in u-boot Bhargav A K
[U-Boot] Displaying characters on the display in u-boot Anatolij Gustschin
[U-Boot] drivers/mmc: move spl_mmc.c to common/spl Tom Rini
[U-Boot] env-variable setting in u-boot-function Altunbas Sabri (DC-IA/EAH2)
[U-Boot] env_mmc: add support for redundant environment Tom Rini
[U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5 Simon Glass
[U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5 Akshay Saraswat
[U-Boot] fatwrite problem Ruud Commandeur
[U-Boot] fatwrite problem Tom Rini
[U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined Tom Rini
[U-Boot] Fix references to the documentation files Tom Rini
[U-Boot] fopen/fwrite functions TigerLiu at viatech.com.cn
[U-Boot] fopen/fwrite functions Wolfgang Denk
[U-Boot] fopen/fwrite functions TigerLiu at viatech.com.cn
[U-Boot] fopen/fwrite functions Wolfgang Denk
[U-Boot] fopen/fwrite functions TigerLiu at viatech.com.cn
[U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks Marek Vasut
[U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks Trent Piepho
[U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks Marek Vasut
[U-Boot] FW: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality Zhang Ying-B40530
[U-Boot] Fwd: da850-evm: MMC-SD query Manish Badarkhe
[U-Boot] hush variable expansion & quoting Henrik Nordström
[U-Boot] hush variable expansion & quoting Henrik Nordström
[U-Boot] i2c loop command TigerLiu at viatech.com.cn
[U-Boot] i2c loop command Heiko Schocher
[U-Boot] In U-Boot-2013-01, __stringify is not working Balaji N
[U-Boot] In U-Boot-2013-01, __stringify is not working Wolfgang Denk
[U-Boot] Issue in DWMMC in mainline Rajeshwari Birje
[U-Boot] Issue in DWMMC in mainline Jagan Teki
[U-Boot] Issue in DWMMC in mainline Jaehoon Chung
[U-Boot] JFFS2 seems to drop nand data with ECC corrections passal
[U-Boot] Limitations/Considerations when programming U-Boot Oliver Stäbler
[U-Boot] Limitations/Considerations when programming U-Boot Romain Izard
[U-Boot] load file to memory in standalone program Scott A
[U-Boot] load file to memory in standalone program Henrik Nordström
[U-Boot] load file to memory in standalone program Wolfgang Denk
[U-Boot] load file to memory in standalone program Wolfgang Denk
[U-Boot] Loading Linux Image on AT91SAM9263-EK pranav yamjala
[U-Boot] Loading Linux Image on AT91SAM9263-EK Bo Shen
[U-Boot] Micron eMMC problem on sabre SD like card jean-francois simon
[U-Boot] minimum bdi config to read flash on 85xx Monica
[U-Boot] minimum bdi config to read flash on 85xx Fabio Estevam
[U-Boot] minimum bdi config to read flash on 85xx Monica
[U-Boot] Mircron MT46* SDRAM support Karolis B.
[U-Boot] mmc: Define a constant for the maximum block size Tom Rini
[U-Boot] MPC834x U-Boot problem davewellz-wurk at yahoo.co.uk
[U-Boot] mtd: nand: fix the partial page write condition Scott Wood
[U-Boot] mtd: nand: use ssize_t instead of size_t to prevent infinite loop Scott Wood
[U-Boot] mx23-olinuxino: occasional memory errors Kiril Zyapkov
[U-Boot] mx23-olinuxino: occasional memory errors Otavio Salvador
[U-Boot] mx23-olinuxino: occasional memory errors Kiril Zyapkov
[U-Boot] mx23-olinuxino: occasional memory errors Fabio Estevam
[U-Boot] mx23-olinuxino: occasional memory errors Tsvetan Usunov, OLIMEX Ltd
[U-Boot] mx23-olinuxino: occasional memory errors Tsvetan Usunov, OLIMEX Ltd
[U-Boot] mx23-olinuxino: occasional memory errors Otavio Salvador
[U-Boot] mx23-olinuxino: occasional memory errors Otavio Salvador
[U-Boot] mx23-olinuxino: occasional memory errors Fabio Estevam
[U-Boot] mx23-olinuxino: occasional memory errors Tsvetan Usunov, OLIMEX Ltd
[U-Boot] mx23-olinuxino: occasional memory errors Fabio Estevam
[U-Boot] mx23-olinuxino: occasional memory errors Tsvetan Usunov, OLIMEX Ltd
[U-Boot] nand onfi 8bit/16bit bus support Michal Simek
[U-Boot] nand onfi 8bit/16bit bus support Scott Wood
[U-Boot] nand onfi 8bit/16bit bus support Michal Simek
[U-Boot] nand/fsl_elbc: detect page size at runtime Scott Wood
[U-Boot] nand/fsl_ifc: Convert to self-init Scott Wood
[U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks Scott Wood
[U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks Scott Wood
[U-Boot] Netconsole in u-Boot-2013.01 seems to be broken. bodhi
[U-Boot] Not able load u-boot from flash to ddr sadashiva reddy
[U-Boot] Not able load u-boot from flash to ddr Stefan Roese
[U-Boot] OMAP5: Enable USB Ethernet support with LAN9730 Tom Rini
[U-Boot] Patch for RAMBOOT sadashiva reddy
[U-Boot] Patch for RAMBOOT Stefan Roese
[U-Boot] Please pull u-boot-cfi-flash/master Stefan Roese
[U-Boot] Please pull u-boot-cfi-flash/master Tom Rini
[U-Boot] Please pull u-boot-mmc.git Andy Fleming
[U-Boot] Please pull u-boot-mmc.git Tom Rini
[U-Boot] Please pull u-boot-mmc.git Andy Fleming
[U-Boot] Please pull u-boot-mmc.git Tom Rini
[U-Boot] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] Please pull u-boot-mpc85xx.git Tom Rini
[U-Boot] Please pull u-boot-mpc85xx.git Fleming Andy-AFLEMING
[U-Boot] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] Please pull u-boot-mpc85xx.git Tom Rini
[U-Boot] Please pull u-boot-mpc85xx.git Fleming Andy-AFLEMING
[U-Boot] Please pull u-boot-mpc85xx.git Andy Fleming
[U-Boot] Please pull u-boot-mpc85xx.git Tom Rini
[U-Boot] Please pull u-boot-ti/master Tom Rini
[U-Boot] Please pull u-boot-ti/master Albert ARIBAUD
[U-Boot] Please pull u-boot-x86.git Simon Glass
[U-Boot] Please pull u-boot-x86.git Tom Rini
[U-Boot] Please pull u-boot-x86.git Simon Glass
[U-Boot] Please pull u-boot-x86.git Tom Rini
[U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
[U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Scott Wood
[U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
[U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
[U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Scott Wood
[U-Boot] problem about PING error from PC to u-boot du zhenhuan
[U-Boot] problem about PING error from PC to u-boot Stefano Babic
[U-Boot] problem about PING error from PC to u-boot du zhenhuan
[U-Boot] Pull request - fpga Michal Simek
[U-Boot] Pull request - fpga Albert ARIBAUD
[U-Boot] Pull request - fpga Albert ARIBAUD
[U-Boot] Pull request - microblaze Michal Simek
[U-Boot] Pull request - microblaze Tom Rini
[U-Boot] Pull request - microblaze Michal Simek
[U-Boot] Pull request - microblaze Michal Simek
[U-Boot] Pull request - microblaze Tom Rini
[U-Boot] Pull request - zynq Michal Simek
[U-Boot] Pull request - zynq Albert ARIBAUD
[U-Boot] Pull request - zynq Albert ARIBAUD
[U-Boot] pull request for u-boot-tegra/master into ARM/master Tom Warren
[U-Boot] pull request for u-boot-tegra/master into ARM/master Albert ARIBAUD
[U-Boot] Pull request v2: u-boot-blackfin Sonic Zhang
[U-Boot] Pull request v2: u-boot-blackfin Tom Rini
[U-Boot] Pull request: nand flash Scott Wood
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] Pull request: nand flash Scott Wood
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Tom Rini
[U-Boot] Pull request: u-boot-blackfin Sonic Zhang
[U-Boot] Pull request: u-boot-blackfin Tom Rini
[U-Boot] Pull request: u-boot-blackfin Sonic Zhang
[U-Boot] Pull request: u-boot-blackfin Tom Rini
[U-Boot] Pull request: u-boot-blackfin Sonic Zhang
[U-Boot] Pull request: u-boot-fdt Jerry Van Baren
[U-Boot] Pull request: u-boot-fdt Tom Rini
[U-Boot] Pull request: u-boot-nds32 Macpaul Lin
[U-Boot] Pull request: u-boot-nds32 Tom Rini
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Bo Shen
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Marek Vasut
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Bo Shen
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Bo Shen
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Marek Vasut
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Bo Shen
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Marek Vasut
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Benoît Thébaudeau
[U-Boot] Question: issues for usb keyboard work with OHCI HCD Marek Vasut
[U-Boot] questions about dp83848 on mpc8315e board du zhenhuan
[U-Boot] Questions about U-boot of customized MPC8315E board Scott Wood
[U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board Igor Ferrara
[U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard) Sricharan R
[U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard) André Schaller
[U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard) An Schall
[U-Boot] readl / writel function questions TigerLiu at viatech.com.cn
[U-Boot] Regarding tdm3730 Nagesh Pathak
[U-Boot] Regression from v2013.04-rc3 with sdcard detection Stephen Warren
[U-Boot] Regression from v2013.04-rc3 with sdcard detection Jaehoon Chung
[U-Boot] Regression from v2013.04-rc3 with sdcard detection Tom Rini
[U-Boot] Regression from v2013.04-rc3 with sdcard detection Nicolas Chauvet
[U-Boot] representing multi-socket CPU platform in .dts Curt Brune
[U-Boot] Samsung patches pending Simon Glass
[U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4 Henrik Nordström
[U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4 Simon Glass
[U-Boot] SF: Add Spansion S25FL064P IDs Jagan Teki
[U-Boot] SF: Add Spansion S25FL064P IDs Marek Vasut
[U-Boot] smc911x: fix the timeout detection Tom Rini
[U-Boot] Soft_spi questions laurent vaudoit
[U-Boot] Soft_spi questions Jagan Teki
[U-Boot] Soft_spi questions laurent vaudoit
[U-Boot] spl_mmc: cleanup variable types Tom Rini
[U-Boot] TFTP timeouts, i.mx fec problem? Ruud Commandeur
[U-Boot] TFTP timeouts, i.mx fec problem? Wolfgang Denk
[U-Boot] TFTP timeouts, i.mx fec problem? Stefano Babic
[U-Boot] TFTP timeouts, i.mx fec problem? Ruud Commandeur
[U-Boot] TFTP timeouts, i.mx fec problem? Ruud Commandeur
[U-Boot] TFTP timeouts, i.mx fec problem? Wolfgang Denk
[U-Boot] TFTP timeouts, i.mx fec problem? Ruud Commandeur
[U-Boot] TFTP timeouts, i.mx fec problem? Stefano Babic
[U-Boot] TFTP timeouts, i.mx fec problem? Stefano Babic
[U-Boot] TFTP timeouts, i.mx fec problem? Fabio Estevam
[U-Boot] TFTP timeouts, i.mx fec problem? Wolfgang Denk
[U-Boot] TFTP timeouts, i.mx fec problem? Wolfgang Denk
[U-Boot] TFTP timeouts, i.mx fec problem? Troy Kisky
[U-Boot] U-Boot code git versions problem Balaji N
[U-Boot] U-Boot code git versions problem Jagan Teki
[U-Boot] U-Boot configuration on LM3S8962 problem Xaut Jzd
[U-Boot] U-Boot OMAP issues Lubomir Popov
[U-Boot] u-boot UBI support Tom Rini
[U-Boot] u-boot UBI support Paul B. Henson
[U-Boot] u-boot UBI support Paul B. Henson
[U-Boot] u-boot UBI support Tom Rini
[U-Boot] u-boot UBI support Fabio Estevam
[U-Boot] u-boot UBI support Paul B. Henson
[U-Boot] u-boot UBI support Tom Rini
[U-Boot] u-boot UBI support Paul B. Henson
[U-Boot] u-boot UBI support Tom Rini
[U-Boot] u-boot USB question Lance Beck
[U-Boot] u-boot USB question Bo Shen
[U-Boot] u-boot USB question Lance Beck
[U-Boot] u-boot USB question Bo Shen
[U-Boot] u-boot USB question Michael Trimarchi
[U-Boot] u-boot USB question Andreas Bießmann
[U-Boot] u-boot USB question Andreas Bießmann
[U-Boot] u-boot without phy Avner Flesch
[U-Boot] Uboot Analysis Question Yong Yun Toh
[U-Boot] uboot for cavium octeon 2 MIPS SOC Edward K
[U-Boot] uboot mips cpu flash memory map 0x1F000000 or 0xBF000000 RdrouterUboot Router
[U-Boot] Uboot question from Newbee Casper Floppy
[U-Boot] Uboot question from Newbee Andreas Bießmann
[U-Boot] uboot source code for MPC8641D & MPC8548E answerme
[U-Boot] ulpi patch in uboot Stefano Babic
[U-Boot] ulpi patch in uboot Michael Trimarchi
[U-Boot] ulpi patch in uboot Michael Trimarchi
[U-Boot] ulpi patch in uboot Igor Grinberg
[U-Boot] ulpi patch in uboot Stefano Babic
[U-Boot] ulpi patch in uboot Michael Trimarchi
[U-Boot] Unable to receive DHCP packets (qemu-system-arm) pietrushnic
[U-Boot] Unable to understand flow of U-Boot Code. Rajdeep Vaghasia
[U-Boot] Unable to understand flow of U-Boot Code. Vikram Narayanan
[U-Boot] unsupported manufacturer 20 for micron device sathaps
[U-Boot] usb keyboard Maxim Podbereznyy
[U-Boot] usb keyboard Bo Shen
[U-Boot] why patch work cannot catch my patch Xie Shaohui-B21989
[U-Boot] Wrong RAM Size on Devkit8000 Maxime Ripard
[U-Boot] Wrong RAM Size on Devkit8000 Andreas Bießmann
[U-Boot] Wrong RAM Size on Devkit8000 Maxime Ripard
[U-Boot] Your message to U-Boot awaits moderator approval Сергей Янович
[U-Boot] Your message to U-Boot awaits moderator approval Wolfgang Denk
[U-Boot] Your message to U-Boot awaits moderator approval Sergey Yanovich
[U-Boot] Your message to U-Boot awaits moderator approval Peter Barada
[U-Boot] Your message to U-Boot awaits moderator approval Michael Heimpold
[U-Boot] Your message to U-Boot awaits moderator approval Wolfgang Denk
[U-Boot] Your message to U-Boot awaits moderator approval Hu Mingkai-B21284
[U-Boot] Your message to U-Boot awaits moderator approval Wolfgang Denk
[U-Boot] 答复: [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support Stefano Babic

Last message date: Fri May 31 23:44:45 CEST 2013
Archived on: Mon Jun 17 09:42:12 CEST 2013

Messages sorted by: [ thread ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).