[U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO

Benoît Thébaudeau benoit.thebaudeau at advansee.com
Mon May 6 13:33:51 CEST 2013


MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to
connect the FEC.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
---
 board/freescale/mx35pdk/mx35pdk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 12e84d7..9f667d2 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -245,7 +245,7 @@ int board_late_init(void)
 
 		imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
 
-		gpio_direction_output(IMX_GPIO_NR(2, 5), 1);
+		gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
 	}
 
 	val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
-- 
1.7.10.4



More information about the U-Boot mailing list