May 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed May 1 00:28:26 CEST 2013
Ending: Fri May 31 23:44:45 CEST 2013
Messages: 2394

• [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module   Andy Fleming
• [U-Boot] CAN framework in U-Boot   Bhupesh SHARMA
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Simon Glass
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Dirk Behme
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] Pull request - zynq   Michal Simek
• [U-Boot] [PATCH] Fix references to the documentation files   Stefano Babic
• [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support   Michal Simek
• [U-Boot] [PATCH v2 1/7] fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH v2 2/7] fpga: Fix debug message compilation error   Michal Simek
• [U-Boot] [PATCH v2 3/7] cmd: fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c   Michal Simek
• [U-Boot] [PATCH v2 5/7] cmd: fpga: Do not include net.h   Michal Simek
• [U-Boot] [PATCH v2 6/7] fpga: zynq: Add support for loading bitstream   Michal Simek
• [U-Boot] [PATCH v2 7/7] fpga: Check device name against bitstream name   Michal Simek
• [U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO   Michal Simek
• [U-Boot] [PATCH v3] fs/ext4: Support device block sizes != 512 bytes   Egbert Eich
• [U-Boot] u-boot UBI support   Tom Rini
• [U-Boot] uboot for cavium octeon 2 MIPS SOC   Edward K
• [U-Boot] Pull request - microblaze   Tom Rini
• [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c   Tom Rini
• [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support   Tom Rini
• [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c   Michal Simek
• [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support   Michal Simek
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Rini
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] [PATCH 0/2] Loader script updates for OpenRISC   Stefan Kristiansson
• [U-Boot] [PATCH 1/2] openrisc: specify a memory region for u_boot_lists   Stefan Kristiansson
• [U-Boot] [PATCH 2/2] openrisc: move board linker script(s) to a common in cpu/   Stefan Kristiansson
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Marek Vasut
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements   Tom Rini
• [U-Boot] [PATCH 0/9] mx23: Make DDR initialization stable   Fabio Estevam
• [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter   Fabio Estevam
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Fabio Estevam
• [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH 5/9] mx23evk: Disable the internal pad keepers   Fabio Estevam
• [U-Boot] [PATCH 6/9] mx23_olinuxino: Disable the internal pad keepers   Fabio Estevam
• [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations   Fabio Estevam
• [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Fabio Estevam
• [U-Boot] [PATCH 9/9] mxs: spl_mem_init: Change EMI port priority   Fabio Estevam
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Warren
• [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter   Marek Vasut
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Marek Vasut
• [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations   Marek Vasut
• [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Marek Vasut
• [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter   Fabio Estevam
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Fabio Estevam
• [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations   Fabio Estevam
• [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter   Marek Vasut
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Marek Vasut
• [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations   Marek Vasut
• [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations   Fabio Estevam
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Fabio Estevam
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23   Marek Vasut
• [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency for mpic node   Wang Dongsheng-B40534
• [U-Boot] questions about dp83848 on mpc8315e board   du zhenhuan
• [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.   Sonic Zhang
• [U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board   Igor Ferrara
• [U-Boot] CAN framework in U-Boot   Wolfgang Grandegger
• [U-Boot] CAN framework in U-Boot   Bhupesh SHARMA
• [U-Boot] CAN framework in U-Boot   Wolfgang Grandegger
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Jim Lin
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Dirk Behme
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Marek Vasut
• [U-Boot] [PATCH v2 0/9] mx23: Make DDR initialization stable   Fabio Estevam
• [U-Boot] [PATCH v2 1/8] mx23: Fix pad voltage selection bit   Fabio Estevam
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Fabio Estevam
• [U-Boot] [PATCH v2 3/8] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v2 4/8] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v2 5/8] mxs: spl_mem_init: Fix comment about start bit   Fabio Estevam
• [U-Boot] [PATCH v2 6/8] mxs: spl_mem_init: Remove erroneous DDR setting   Fabio Estevam
• [U-Boot] [PATCH v2 7/8] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Fabio Estevam
• [U-Boot] [PATCH v2 8/8] mxs: spl_mem_init: Change EMI port priority   Fabio Estevam
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Warren
• [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support   Tom Rini
• [U-Boot] [PATCH 1/2] mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND   Tom Rini
• [U-Boot] spl_mmc: cleanup variable types   Tom Rini
• [U-Boot] [PATCH v3 5/5] lib: consolidate hang()   Tom Rini
• [U-Boot] [PATCH v3 0/5] consolidate hang()   Tom Rini
• [U-Boot] [PATCH v2 0/11] Add Regular Expressions Support   Tom Rini
• [U-Boot] mmc: Define a constant for the maximum block size   Tom Rini
• [U-Boot] [U-Boot, v2] disk/part_dos: check harder for partition table   Tom Rini
• [U-Boot] [U-Boot, v2] disk/gpt: Fix GPT partition handling for blocksize != 512   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] disk/iso: Add Support for block sizes > 512 byte to ISO partition support   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] fs/fat: Don't multiply fatsize with sector size   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] part/dev_desc: Add log2 of blocksize to block_dev_desc data struct   Tom Rini
• [U-Boot] env_mmc: add support for redundant environment   Tom Rini
• [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.   Mike Frysinger
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] Regression from v2013.04-rc3 with sdcard detection   Stephen Warren
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Troy Kisky
• [U-Boot] [PATCH] mpc512x: remove dead code   Wolfgang Denk
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Michael Heimpold
• [U-Boot] [PATCH] mpc5200: a3m071/a4m2k: Enable flash verify option   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes   Wolfgang Denk
• [U-Boot] [PULL] : Please pull u-boot-mpc5xxx   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Stephen Warren
• [U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function   Stephen Warren
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Fabio Estevam
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Marek Vasut
• [U-Boot] [PATCH v2 1/6] imx: iomux-v3: Add iomux-mx25.h   Benoît Thébaudeau
• [U-Boot] [PATCH v2 2/6] imx: mx25pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v2 3/6] imx: mx25pdk: Fix GPIO assignments   Benoît Thébaudeau
• [U-Boot] [PATCH v2 4/6] imx: tx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v2 5/6] imx: zmx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v2 6/6] imx: mx25: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27   Benoît Thébaudeau
• [U-Boot] [PATCH 02/12] imx: iomux-v3: Add missing definitions to iomux-mx51.h   Benoît Thébaudeau
• [U-Boot] [PATCH 03/12] imx: mx51evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 05/12] imx: vision2: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 06/12] imx: iomux-v3: Add iomux-mx53.h   Benoît Thébaudeau
• [U-Boot] [PATCH 07/12] imx: ima3-mx53: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 08/12] imx: mx53ard: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 09/12] imx: mx53evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 10/12] imx: mx53loco: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 11/12] imx: mx53smd: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Michael Heimpold
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] [PULL] : Please pull u-boot-mpc5xxx   Tom Rini
• [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support   Tom Rini
• [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions   Fabio Estevam
• [U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable   Fabio Estevam
• [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit   Fabio Estevam
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v3 3/7] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v3 4/7] mxs: spl_mem_init: Fix comment about start bit   Fabio Estevam
• [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Fabio Estevam
• [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Fabio Estevam
• [U-Boot] [PATCH v3 7/7] mxs: spl_mem_init: Change EMI port priority   Fabio Estevam
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors   Simon Glass
• [U-Boot] [PATCH 2/2] buildman: Produce a sensible error message when branch is missing   Simon Glass
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Vadim Bendebury
• [U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable   Marek Vasut
• [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit   Marek Vasut
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Marek Vasut
• [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Marek Vasut
• [U-Boot] Regression from v2013.04-rc3 with sdcard detection   Jaehoon Chung
• [U-Boot] [PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   Jaehoon Chung
• [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit   Otavio Salvador
• [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Otavio Salvador
• [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit   Marek Vasut
• [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit   Fabio Estevam
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Fabio Estevam
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Marek Vasut
• [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Marek Vasut
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings   Marek Vasut
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Bo Shen
• [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.   Rajeshwari Birje
• [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.   Sonic Zhang
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Vadim Bendebury
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Vadim Bendebury
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Dirk Behme
• [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support   Kuo-Jung Su
• [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO   Michal Simek
• [U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support   Michal Simek
• [U-Boot] [PATCH v3 1/9] fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH v3 2/9] fpga: Fix debug message compilation error   Michal Simek
• [U-Boot] [PATCH v3 3/9] cmd: fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH v3 4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c   Michal Simek
• [U-Boot] [PATCH v3 5/9] fpga: Change the first parameter in fpga_loadbitstream   Michal Simek
• [U-Boot] [PATCH v3 6/9] cmd: fpga: Do not include net.h   Michal Simek
• [U-Boot] [PATCH v3 7/9] fpga: zynq: Add support for loading bitstream   Michal Simek
• [U-Boot] [PATCH v3 8/9] fpga: Check device name against bitstream name   Michal Simek
• [U-Boot] [PATCH v3 9/9] fpga: Remove all CONFIG_SYS_* fpga related options   Michal Simek
• [U-Boot] [PATCH 1/2] microblaze: bootm: Fix coding style issues   Michal Simek
• [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd   Michal Simek
• [U-Boot] Regarding tdm3730   Nagesh Pathak
• [U-Boot] uboot source code for MPC8641D & MPC8548E   answerme
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Jim Lin
• [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114   Jim Lin
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Jonas Gorski
• [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114   Venu Byravarasu
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] Regression from v2013.04-rc3 with sdcard detection   Tom Rini
• [U-Boot] Regression from v2013.04-rc3 with sdcard detection   Nicolas Chauvet
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Marek Vasut
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Marek Vasut
• [U-Boot] [PATCH] P1022DS: Set CONFIG_SPL_MAX_SIZE directly   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Marek Vasut
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Marek Vasut
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Marek Vasut
• [U-Boot] [PATCH v4 0/7] mx23: Make DDR initialization stable   Fabio Estevam
• [U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit   Fabio Estevam
• [U-Boot] [PATCH v4 2/7] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v4 3/7] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v4 4/7] mxs: spl_mem_init: Fix comment about start bit   Fabio Estevam
• [U-Boot] [PATCH v4 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Fabio Estevam
• [U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Fabio Estevam
• [U-Boot] [PATCH v4 7/7] mxs: spl_mem_init: Change EMI port priority   Fabio Estevam
• [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx   Valentin Longchamp
• [U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit   Marek Vasut
• [U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Marek Vasut
• [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable   Fabio Estevam
• [U-Boot] [PATCH v5 1/7] mx23: Fix pad voltage selection bit   Fabio Estevam
• [U-Boot] [PATCH v5 2/7] mx23evk: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v5 3/7] mx23_olinuxino: Fix DDR pin iomux settings   Fabio Estevam
• [U-Boot] [PATCH v5 4/7] mxs: spl_mem_init: Fix comment about start bit   Fabio Estevam
• [U-Boot] [PATCH v5 5/7] mxs: spl_mem_init: Remove erroneous DDR setting   Fabio Estevam
• [U-Boot] [PATCH v5 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Fabio Estevam
• [U-Boot] [PATCH v5 7/7] mxs: spl_mem_init: Change EMI port priority   Fabio Estevam
• [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Stephen Warren
• [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable   Marek Vasut
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support   Stephen Warren
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Wolfgang Denk
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Jonas Gorski
• [U-Boot] [PATCH] mx23: Add a README file   Fabio Estevam
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Wolfgang Denk
• [U-Boot] [PATCH] mx23: Add a README file   Marek Vasut
• [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3   Matt Sealey
• [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH] mx23: Add a README file   Otavio Salvador
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Jonas Gorski
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] README: mx28_common: Keep the text within 80 columns   Fabio Estevam
• [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port   Fabio Estevam
• [U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence   Fabio Estevam
• [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs   Fabio Estevam
• [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory   Fabio Estevam
• [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory   Fabio Estevam
• [U-Boot] [PATCH] itest: Add bitwise and operator   Eric Nelson
• [U-Boot] [PATCH] itest: Add bitwise and operator   Wolfgang Denk
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Wolfgang Denk
• [U-Boot] [PATCH] itest: Add bitwise and operator   Eric Nelson
• [U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support   Tom Rini
• [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port   Marek Vasut
• [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs   Marek Vasut
• [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory   Marek Vasut
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory   Fabio Estevam
• [U-Boot] [PATCH v3 01/25] imx: iomux-v3: Add iomux-mx25.h   Benoît Thébaudeau
• [U-Boot] [PATCH v3 02/25] imx: mx25pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 03/25] imx: mx25pdk: Fix GPIO assignments   Benoît Thébaudeau
• [U-Boot] [PATCH v3 04/25] imx: tx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 05/25] imx: zmx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 06/25] imx: mx25: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH v3 07/25] imx: iomux-v3: Add iomux-mx35.h   Benoît Thébaudeau
• [U-Boot] [PATCH v3 08/25] imx: flea3: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 09/25] imx: mx35pdk: Fix WDOG_RST iomux function   Benoît Thébaudeau
• [U-Boot] [PATCH v3 10/25] imx: mx35pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 11/25] imx: woodburn: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 12/25] imx: mx35: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH v3 13/25] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27   Benoît Thébaudeau
• [U-Boot] [PATCH v3 14/25] imx: iomux-v3: Add missing definitions to iomux-mx51.h   Benoît Thébaudeau
• [U-Boot] [PATCH v3 15/25] imx: mx51evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 16/25] imx: mx51_efikamx/sb: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 17/25] imx: vision2: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 18/25] imx: iomux-v3: Add iomux-mx53.h   Benoît Thébaudeau
• [U-Boot] [PATCH v3 19/25] imx: ima3-mx53: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 20/25] imx: mx53ard: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 21/25] imx: mx53evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 22/25] imx: mx53loco: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 23/25] imx: mx53smd: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v3 25/25] imx: mx5: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port   Fabio Estevam
• [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port   Marek Vasut
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Troy Kisky
• [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory   Marek Vasut
• [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue   Andy Fleming
• [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Fleming Andy-AFLEMING
• [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors   Tom Rini
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot   Adnan Ali
• [U-Boot] [PATCH 1/2 v12] Enable Btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Adnan Ali
• [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot   Adnan Ali
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Dirk Behme
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 1/9] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v3 3/9] i2c, soft-i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v3 4/9] i2c, fsl_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX   Heiko Schocher
• [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable   Heiko Schocher
• [U-Boot] [PATCH v3 7/9] tegra: i2c: Add function to know about current bus   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] Compiling U-BOOT bootloader on x86   Ravi Kant Tiwari
• [U-Boot] Compiling U-BOOT bootloader on x86   ravi tiwari
• [U-Boot] Compiling U-BOOT bootloader on x86   Wolfgang Denk
• [U-Boot] Netconsole in u-Boot-2013.01 seems to be broken.   bodhi
• [PATCH] Update doc/README.ubi to add description of accessing ubi filesystems.   Paul B. Henson
• [PATCH] Update doc/README.ubi to add description of accessing ubi filesystems.   Paul B. Henson
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] cfb_console and dcache on i.MX6   Eric Nelson
• [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Wolfgang Denk
• [U-Boot] Compiling U-BOOT bootloader on x86   ravi tiwari
• [U-Boot] Compiling U-BOOT bootloader on x86   Wolfgang Denk
• [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers   Stefano Babic
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Tom Rini
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Stefano Babic
• [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support   Stefano Babic
• [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable   Stefano Babic
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Wolfgang Denk
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k   Stefano Babic
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Stefano Babic
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Stefano Babic
• [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3   Stefano Babic
• [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument   Luka Perkov
• [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function   Marek Vasut
• [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path   Marek Vasut
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Marek Vasut
• [U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa.git/master   Marek Vasut
• [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads   Fabio Estevam
• [U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V   Marek Vasut
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Marek Vasut
• [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads   Marek Vasut
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Marek Vasut
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Marek Vasut
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Bo Shen
• [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module   Liu Gang
• [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument   Wolfgang Denk
• [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode   Haijun.Zhang
• [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue   Kuo-Jung Su
• [U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Stefan Roese
• [U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured   Stefano Babic
• [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V   Stefano Babic
• [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads   Stefano Babic
• [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads   Stefano Babic
• [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument   Luka Perkov
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Stefano Babic
• [U-Boot] Pull request - fpga   Michal Simek
• [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd   Michal Simek
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Dirk Eibach
• [U-Boot] [PATCH v2 1/2] microblaze: bootm: Fix coding style issues   Michal Simek
• [U-Boot] [PATCH v2 2/2] microblaze: bootm: Add support for loading initrd   Michal Simek
• [U-Boot] usb keyboard   Maxim Podbereznyy
• [U-Boot] [PATCH] imx: spl: Merge libimx-common make rules   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO   Benoît Thébaudeau
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] usb keyboard   Bo Shen
• [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX   Holger Brunck
• [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable   Holger Brunck
• [U-Boot] u-boot UBI support   Tom Rini
• [U-Boot] [PULL] u-boot-pxa.git/master   Tom Rini
• [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument   Wolfgang Denk
• [U-Boot] [PATCH] arm/km: fix u-boot update functionality   Holger Brunck
• [U-Boot] cfb_console and dcache on i.MX6   Anatolij Gustschin
• [U-Boot] [PULL] u-boot-pxa.git/master   Marek Vasut
• [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument   Luka Perkov
• [U-Boot] Your message to U-Boot awaits moderator approval   Сергей Янович
• [U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V   Holger Brunck
• [U-Boot] [PATCH 2/2] powerpc/83xx/km: make local functions and structs static   Holger Brunck
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Rob Herring
• [U-Boot] [PATCH] arm/km: make local functions static   Holger Brunck
• [U-Boot] u-boot UBI support   Fabio Estevam
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Tom Rini
• [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution   Andre Przywara
• [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [PATCH 6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15   Andre Przywara
• [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO   Stefano Babic
• [U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 02/10] powerpc/ppc4xx: Add gdsys mclink interface   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 03/10] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 07/10] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 08/10] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 09/10] powerpc/ppc4xx: Consider gdsys FPGA OSD size   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 10/10] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX   Heiko Schocher
• [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable   Heiko Schocher
• [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx   Valentin Longchamp
• [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA   Wolfgang Denk
• [U-Boot] [PATCH] arm/km: fix u-boot update functionality   Heiko Schocher
• [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA   Wolfgang Denk
• [U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards   Wolfgang Denk
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [RFC PATCH] patman: Do not hardcode python path   Michal Simek
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Wolfgang Denk
• [U-Boot] [RFC PATCH] patman: Do not hardcode python path   Tom Rini
• [U-Boot] [PATCH] arm: pxa: Add support for ICP DAS LP-8x4x   Сергей Янович
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Dirk Eibach
• [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors   Simon Glass
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Tom Rini
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Dirk Eibach
• [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver   Anatolij Gustschin
• [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK   Anatolij Gustschin
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Tom Rini
• [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver   Stefano Babic
• [U-Boot] Your message to U-Boot awaits moderator approval   Wolfgang Denk
• [U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions   Eric Nelson
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] Your message to U-Boot awaits moderator approval   Sergey Yanovich
• [U-Boot] Your message to U-Boot awaits moderator approval   Peter Barada
• [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK   Stefano Babic
• [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver   Stefano Babic
• [U-Boot] [PATCH 2/4] arm: mxs: Add LCDIF registers for i.MX233   Stefano Babic
• [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function   Stefano Babic
• [U-Boot] [PATCH] Generalize "cls" command   Anatolij Gustschin
• [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode   Andy Fleming
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Dirk Eibach
• [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Dirk Eibach
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] Your message to U-Boot awaits moderator approval   Michael Heimpold
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Vadim Bendebury
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Daniel Schwierzeck
• [U-Boot] nand onfi 8bit/16bit bus support   Michal Simek
• [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation   Troy Kisky
• [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module   Andy Fleming
• [U-Boot] [RFC PATCH] patman: Do not hardcode python path   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] Your message to U-Boot awaits moderator approval   Wolfgang Denk
• [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Joe Hershberger
• [PATCH 1/5] omap5: add qspi support   Matt Porter
• [PATCH 2/5] spi: add TI QSPI driver   Matt Porter
• [PATCH 3/5] dra7xx_evm: add SPL API, QSPI, and serial flash support   Matt Porter
• [U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support   Anatolij Gustschin
• [U-Boot] [PATCH v0] davinci, mmc: Added a delay reading ext CSD register   Andy Fleming
• [U-Boot] [SOLVED] Re: Your message to U-Boot awaits moderator approval   Michael Heimpold
• [U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h   Matt Thomas
• [U-Boot] [PATCH 0/5] Resync libfdt with dtc upstream   gvb.uboot at gmail.com
• [U-Boot] [PATCH 1/5] Export fdt_stringlist_contains()   gvb.uboot at gmail.com
• [U-Boot] [PATCH 2/5] Fix typo   gvb.uboot at gmail.com
• [U-Boot] [PATCH 3/5] Added license header to dtc/libfdt/fdt.h and libfdt_env.h   gvb.uboot at gmail.com
• [U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration   gvb.uboot at gmail.com
• [U-Boot] [PATCH 5/5] Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h   gvb.uboot at gmail.com
• [U-Boot] [PATCH v3 07/17] fdt: Add a parameter to fdt_valid()   Jerry Van Baren
• [U-Boot] [PATCH v3 09/17] fdt: Allow fdt command to check and update control FDT   Jerry Van Baren
• [U-Boot] [PATCH v3 10/17] sandbox: fdt: Support fdt command for sandbox   Jerry Van Baren
• [U-Boot] [PATCH v3 11/17] fdt: Skip checking FDT if the pointer is NULL   Jerry Van Baren
• [U-Boot] [PATCH v3 12/17] Revert "fdt- Tell the FDT library where the device tree is"   Jerry Van Baren
• [U-Boot] [PATCH] arm/km: fix u-boot update functionality   Prafulla Wadaskar
• [U-Boot] [PATCH] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH v4 0/7] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities   Kuo-Jung Su
• [U-Boot] [PATCH v4 3/7] arm: add Faraday interrupt controller support   Kuo-Jung Su
• [U-Boot] [PATCH v4 4/7] arm: add Faraday FTTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v4 5/7] arm: add Faraday FTPWMTMR010 timer support   Kuo-Jung Su
• [U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility   Kuo-Jung Su
• [U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v4 0/2] usb: ehci: add Faraday USB EHCI&Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v4] mmc: update Faraday FTSDC010 for rw performance   Kuo-Jung Su
• [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v4] net: add Faraday FTMAC110 10/100Mbps ethernet support   Kuo-Jung Su
• [U-Boot] [PATCH v4] net: update FTGMAC100 for MMU/D-cache support   Kuo-Jung Su
• [U-Boot] [PATCH v4] spi: add Faraday FTSPI010 SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2] video: add Faraday FTLCDC200 LCD controller support   Kuo-Jung Su
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] uboot mips cpu flash memory map 0x1F000000 or 0xBF000000   RdrouterUboot Router
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework   Marc Dietrich
• [U-Boot] [PATCH 1/6 v2] powerpc/doc: Update the README.srio-pcie-boot-corenet   Liu Gang
• [U-Boot] [PATCH 2/6 v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module   Liu Gang
• [U-Boot] [PATCH 3/6 v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE   Liu Gang
• [U-Boot] [PATCH 4/6 v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE   Liu Gang
• [U-Boot] [PATCH 5/6 v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE   Liu Gang
• [U-Boot] [PATCH 6/6 v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE   Liu Gang
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module   Liu Gang
• [U-Boot] problem about PING error from PC to u-boot   du zhenhuan
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] problem about PING error from PC to u-boot   Stefano Babic
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] u-boot without phy   Avner Flesch
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support   Heiko Schocher
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Wang Huan-B18965
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework   Stephen Warren
• [U-Boot] [PATCH] tools: default image: use ih_size for checking data size   Peter Korsgaard
• [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL   Joel A Fernandes
• [U-Boot] [PATCH 2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver   Joel A Fernandes
• [U-Boot] Not able load u-boot from flash to ddr   sadashiva reddy
• [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox   Simon Glass
• [U-Boot] [PATCH v4 01/19] env: Fix minor comment typos in cmd_nvedit   Simon Glass
• [U-Boot] [PATCH v4 02/19] Add minor updates to README.fdt-control   Simon Glass
• [U-Boot] [PATCH v4 03/19] hash: Add a way to calculate a hash for any algortihm   Simon Glass
• [U-Boot] [PATCH v4 04/19] bootstage: Don't build for HOSTCC   Simon Glass
• [U-Boot] [PATCH v4 05/19] mkimage: Move ARRAY_SIZE to header file   Simon Glass
• [U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration   Simon Glass
• [U-Boot] [PATCH v4 07/19] image: Move timestamp #ifdefs to header file   Simon Glass
• [U-Boot] [PATCH v4 08/19] image: Export fit_check_ramdisk()   Simon Glass
• [U-Boot] [PATCH v4 09/19] image: Split FIT code into new image-fit.c   Simon Glass
• [U-Boot] [PATCH v4 10/19] image: Move HOSTCC image code to tools/   Simon Glass
• [U-Boot] [PATCH v4 11/19] image: Split hash node processing into its own function   Simon Glass
• [U-Boot] [PATCH v4 12/19] image: Convert fit_image_hash_set_value() to static, and rename   Simon Glass
• [U-Boot] [PATCH v4 13/19] image: Rename fit_image_check_hashes() to fit_image_verify()   Simon Glass
• [U-Boot] [PATCH v4 14/19] image: Move hash checking into its own function   Simon Glass
• [U-Boot] [PATCH v4 15/19] image: Move error! string to common place   Simon Glass
• [U-Boot] [PATCH v4 16/19] image: Export fit_conf_get_prop_node()   Simon Glass
• [U-Boot] [PATCH v4 17/19] image: Rename fit_add_hashes() to fit_add_verification_data()   Simon Glass
• [U-Boot] [PATCH v4 18/19] image: Rename hash printing to fit_image_print_verification_data()   Simon Glass
• [U-Boot] [PATCH v4 19/19] sandbox: image: Add support for booting images in sandbox   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework   Simon Glass
• [U-Boot] [PATCH 1/5] Export fdt_stringlist_contains()   Simon Glass
• [U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration   Simon Glass
• [U-Boot] Not able load u-boot from flash to ddr   Stefan Roese
• [U-Boot] Please pull u-boot-mmc.git   Tom Rini
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
• [U-Boot] [RFC PATCH v2 01/14] sandbox: Make map_to_sysmem() use a constant pointer   Simon Glass
• [U-Boot] [RFC PATCH v2 02/14] sandbox: Correct data sizes and printf() strings in fdtdec.c   Simon Glass
• [U-Boot] [RFC PATCH v2 03/14] sandbox: config: Don't use 64-bit physical memory   Simon Glass
• [U-Boot] [RFC PATCH v2 04/14] Add cmd_process_error() to report and process errors   Simon Glass
• [U-Boot] [RFC PATCH v2 05/14] sandbox: config: Enable driver model   Simon Glass
• [U-Boot] [RFC PATCH v2 06/14] dm: Add base driver model support   Simon Glass
• [U-Boot] [RFC PATCH v2 07/14] dm: Set up driver model after relocation   Simon Glass
• [U-Boot] [RFC PATCH v2 08/14] dm: Add basic tests   Simon Glass
• [U-Boot] [RFC PATCH v2 09/14] dm: Add a 'dm' command for testing   Simon Glass
• [U-Boot] [RFC PATCH v2 10/14] dm: Add a demonstration/example driver   Simon Glass
• [U-Boot] [RFC PATCH v2 11/14] dm: Add GPIO support and tests   Simon Glass
• [U-Boot] [RFC PATCH v2 12/14] sandbox: Convert GPIOs to use driver model   Simon Glass
• [U-Boot] [RFC PATCH v2 13/14] dm: Enable gpio command to support driver model   Simon Glass
• [U-Boot] [RFC PATCH v2 14/14] dm: Add README for driver model   Simon Glass
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support   Marek Vasut
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration   Jerry Van Baren
• [U-Boot] [Patch v2, batch 1 09/10] powerpc/corenet_ds: Move SRIO enablement into specific boards   Andy Fleming
• [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation   Andy Fleming
• [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation   York Sun
• [U-Boot] problem about PING error from PC to u-boot   du zhenhuan
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] [PATCH V2] powerpc/esdhc: Correct judgement for DATA PIO mode   Haijun.Zhang
• [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode   Zhang Haijun-B42677
• [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] u-boot UBI support   Tom Rini
• [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support   Marek Vasut
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework   Heiko Schocher
• [U-Boot] [PATCH] video: exynos: Change mipi dsi write function parameters correctly   Donghwa Lee
• [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m   Stephen Warren
• [U-Boot] [PATCH] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data()   Donghwa Lee
• [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support   Heiko Schocher
• [U-Boot] [PATCH] nds32: Use sections header to obtain link symbols   Macpaul Lin
• [U-Boot] Pull request: u-boot-nds32   Macpaul Lin
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v5] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Sricharan R
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Andreas Bießmann
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry   Andreas Bießmann
• [U-Boot] Pull request: u-boot-nds32   Tom Rini
• [U-Boot] Patch for RAMBOOT   sadashiva reddy
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] bug regarding ext4 filesystem   ScottyYi at s3graphics.com
• [U-Boot] Patch for RAMBOOT   Stefan Roese
• [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)   An Schall
• [U-Boot] Mircron MT46* SDRAM support   Karolis B.
• [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses   Gabbasov, Andrew
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support   Stephen Warren
• [U-Boot] unsupported manufacturer 20 for micron device   sathaps
• [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Marek Vasut
• [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Gabbasov, Andrew
• [U-Boot] [PATCH V2 4/5] ARM: OMAP: Cleanup boot parameters usage   Tom Rini
• [U-Boot] [PATCH V2 5/5] ARM: OMAP: Add arch_cpu_init function   Tom Rini
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Tom Rini
• [U-Boot] [PATCH v3 01/12] mkimage: Put FIT loading in function and tidy error handling   Simon Glass
• [U-Boot] [PATCH v3 02/12] image: Remove remaining #ifdefs in image-fit.c   Simon Glass
• [U-Boot] [PATCH v3 03/12] image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL   Simon Glass
• [U-Boot] [PATCH v3 04/12] image: Split libfdt code into image-fdt.c   Simon Glass
• [U-Boot] [PATCH v3 05/12] image: Add device tree setup to image library   Simon Glass
• [U-Boot] [PATCH v3 06/12] arm: Refactor bootm to reduce #ifdefs   Simon Glass
• [U-Boot] [PATCH v3 07/12] arm: Use image_setup_linux() instead of local code   Simon Glass
• [U-Boot] [PATCH v3 08/12] powerpc: Use image_setup_linux() instead of local code   Simon Glass
• [U-Boot] [PATCH v3 09/12] m68k: Use image_setup_linux() instead of local code   Simon Glass
• [U-Boot] [PATCH v3 10/12] sparc: Use image_setup_linux() instead of local code   Simon Glass
• [U-Boot] [PATCH v3 11/12] buildman: Allow conflicting tags to avoid spurious errors   Simon Glass
• [U-Boot] [PATCH v3 12/12] buildman: Produce a sensible error message when branch is missing   Simon Glass
• [U-Boot] [PATCHv2 0/6] Falcon boot mode for spl_mmc   Peter Korsgaard
• [U-Boot] [PATCHv2 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging   Peter Korsgaard
• [U-Boot] [PATCHv2 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out   Peter Korsgaard
• [U-Boot] [PATCHv2 3/6] spl_mmc: add Falcon mode support for FAT variant   Peter Korsgaard
• [U-Boot] [PATCHv2 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument   Peter Korsgaard
• [U-Boot] [PATCHv2 5/6] spl_mmc: add Falcon mode support for raw variant   Peter Korsgaard
• [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand   Peter Korsgaard
• [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand   Tom Rini
• [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand   Peter Korsgaard
• [U-Boot] representing multi-socket CPU platform in .dts   Curt Brune
• [U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE   Tom Rini
• [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash   Tom Rini
• [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Tom Rini
• [U-Boot] [PATCH 4/6] am335x_evm: Rework board_is_foo() checks   Tom Rini
• [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   Scott Wood
• [U-Boot] [Patch v2, batch 2 15/23] T4/USB: Add USB 2.0 UTMI dual phy support   Andy Fleming
• [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation   Fleming Andy-AFLEMING
• [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v5] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux   Bo Shen
• [U-Boot] [PATCH v5 0/4] usb: add Faraday EHCI & Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v5 3/4] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v5 4/4] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH] EXYNOS: SPI: Support word transfers   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m   Simon Glass
• [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree   Simon Glass
• [U-Boot] [PATCH v2 1/2] spi: mxc_spi: Fix pre and post divider calculation   Dirk Behme
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Dirk Behme
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Sricharan R
• [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH] arm: fix a comment   Masahiro Yamada
• [U-Boot] [PATCH] smc911x: fix the timeout detection   Masahiro Yamada
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] Fwd: da850-evm: MMC-SD query   Manish Badarkhe
• [U-Boot] Pull request - microblaze   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)   Sricharan R
• [U-Boot] [PATCH] arm: fix a comment   Benoît Thébaudeau
• [U-Boot] Loading Linux Image on AT91SAM9263-EK   pranav yamjala
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Adnan Ali
• [U-Boot] Loading Linux Image on AT91SAM9263-EK   Bo Shen
• [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions   Tom Rini
• [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions   Lubomir Popov
• [U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Troy Kisky
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Troy Kisky
• [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode   Tom Rini
• [U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h   Tom Rini
• [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox   Tom Rini
• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] nand onfi 8bit/16bit bus support   Scott Wood
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Uboot question from Newbee   Casper Floppy
• [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox   Simon Glass
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Bo Shen
• [U-Boot] [PATCH v2] arm: fix a comment   y at epochmail.jp.panasonic.com
• [U-Boot] [PATCH v2] arm: fix a comment   Masahiro Yamada
• [U-Boot] [PATCH] arm: fix a comment   Masahiro Yamada
• [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.   Rajeshwari Birje
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Dirk Behme
• [U-Boot] nand onfi 8bit/16bit bus support   Michal Simek
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Andreas Bießmann
• [U-Boot] "No status update" errors in OMAP mmc_send_cmd()   Tomi Valkeinen
• [U-Boot] Uboot question from Newbee   Andreas Bießmann
• [U-Boot] [ARM] [STATUS] Resuming activity   Albert ARIBAUD
• [U-Boot] Pull request - zynq   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: fix a comment   Masahiro Yamada
• [U-Boot] Pull request - fpga   Albert ARIBAUD
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] drivers/mmc: move spl_mmc.c to common/spl   ying.zhang at freescale.com
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Albert ARIBAUD
• [U-Boot] Pull request - zynq   Albert ARIBAUD
• [U-Boot] [PATCH] powerpc/mpc85xx: support application without resetvec segment in the linker script   ying.zhang at freescale.com
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Masahiro Yamada
• [U-Boot] Displaying characters on the display in u-boot   Bhargav A K
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   ying.zhang at freescale.com
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Andreas Bießmann
• [U-Boot] Displaying characters on the display in u-boot   Anatolij Gustschin
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable   Marek Vasut
• [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Marek Vasut
• [U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command   Tom Rini
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Marek Vasut
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Andreas Bießmann
• [U-Boot] [PATCH v2] at91sam9260ek: move board id setup to config header   Andreas Bießmann
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Albert ARIBAUD
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git   Fleming Andy-AFLEMING
• [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32   Dirk Behme
• [U-Boot] Pull request - fpga   Albert ARIBAUD
• [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32   Måns Rullgård
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Michael Cashwell
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Albert ARIBAUD
• [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32   Dirk Behme
• [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)   Alexander Graf
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Troy Kisky
• [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)   Tom Rini
• [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)   Alexander Graf
• [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Dirk Behme
• [U-Boot] [PATCH 1/3] mx28evk: Add splash screen support   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx23evk: Add splash screen support   Fabio Estevam
• [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes   Fabio Estevam
• [U-Boot] [v2] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH 0/2] Loader script updates for OpenRISC   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] build: Pull -DBUILD_TAG into separate ifdef   Tom Rini
• [U-Boot] [U-Boot, v2] env: throw an error when an empty key is used   Tom Rini
• [U-Boot] Fix references to the documentation files   Tom Rini
• [U-Boot] [U-Boot, v3] fs/ext4: Support device block sizes != 512 bytes   Tom Rini
• [U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC   Andy Fleming
• [U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC   Tom Rini
• [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm   Troy Kisky
• [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count   Andy Fleming
• [U-Boot] [PATCH 0/4] Factorize ARM relocation code   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] Rename arch/arm/lib/bss.c to sections.c   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] arm: make relocation section symbols compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch   Christoffer Dall
• [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes   Marek Vasut
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Wolfgang Denk
• [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32   Wolfgang Denk
• [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)   Wolfgang Denk
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Benoît Thébaudeau
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Scott Wood
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   Scott Wood
• [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH 1/3] usb: properly re-initialize the USB keyboard.   Simon Glass
• [U-Boot] [PATCH 2/3] usb: workaround non-working keyboards.   Simon Glass
• [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd   Simon Glass
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Allen Martin
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Simon Glass
• [U-Boot] [PATCH] exynos: Enable mmc for snow   Simon Glass
• [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot   Simon Glass
• [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree   Stephen Warren
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm   Dirk Behme
• [U-Boot] [PULL] u-boot-pxa.git/master   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)   Alexander Graf
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Stefano Babic
• [U-Boot] [v2] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220   Wolfgang Denk
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: add missing commit IDs   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Power: remove support for Freescale MPC8220   Wolfgang Denk
• [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx - correction   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] [PATCH 1/2] SPI: Add support for preamble bytes   Simon Glass
• [U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command   Sonic Zhang
• [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer   Simon Glass
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support a delay after deactivate   Simon Glass
• [U-Boot] [PATCH] EXYNOS: SPI: Minimise access to SPI FIFO level   Simon Glass
• [U-Boot] [PATCH] EXYNOS: SPL: Add a custom spi copy function   Simon Glass
• [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function   Simon Glass
• [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function   Simon Glass
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] Pull request: u-boot-fdt   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd   Simon Glass
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Benoît Thébaudeau
• [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd   Marek Vasut
• [U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial   Simon Glass
• [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console   Simon Glass
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c   Simon Glass
• [U-Boot] [PATCH 1/4] EXYNOS: Add API for power reset and exit wakeup   Simon Glass
• [U-Boot] [PATCH 2/4] EXYNOS: LDS file move to common   Simon Glass
• [U-Boot] [PATCH 3/4] EXYNOS4210: Configure GPIO for uart   Simon Glass
• [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.   Simon Glass
• [U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions   Simon Glass
• [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5   Simon Glass
• [U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686   Simon Glass
• [U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5   Simon Glass
• [U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling   Simon Glass
• [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq   Simon Glass
• [U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v   Simon Glass
• [U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C   Simon Glass
• [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus   Simon Glass
• [U-Boot] da850-evm: MMC-SD query   Manish Badarkhe
• [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect   stefano babic
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect   Albert ARIBAUD
• [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function   Wolfgang Denk
• [U-Boot] [PATCH] usb: asix: Move software resets to basic_init   Simon Glass
• [U-Boot] [PULL] : Please pull u-boot-imx - correction done   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v5 5/7] Add Atmel I2C tpm   Simon Glass
• [U-Boot] [PATCH v5 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Simon Glass
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Simon Glass
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Simon Glass
• [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Simon Glass
• [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine   Simon Glass
• [U-Boot] Unable to receive DHCP packets (qemu-system-arm)   pietrushnic
• [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices   Andreas Bießmann
• [U-Boot] [Patch v2 3/4] SPI: atmel_spi: support sama5d3x devices   Andreas Bießmann
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Andreas Bießmann
• [U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support   Andreas Bießmann
• [U-Boot] [Patch v2 3/3] ARM: at91sam9n12: add network support with ksz8851_16mll   Andreas Bießmann
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Adnan Ali
• [U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt   Andreas Bießmann
• [U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition   Andreas Bießmann
• [U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support   Andreas Bießmann
• [U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt   Andreas Bießmann
• [U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition   Andreas Bießmann
• [U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support   Andreas Bießmann
• [U-Boot] [U-Boot,1/2] arm: at91: enable mci support for at91sam9g20ek.   Andreas Bießmann
• [U-Boot] [U-Boot, 2/2] arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card   Andreas Bießmann
• [U-Boot] [U-Boot,1/2] mmc: atmel_mci: using IP version for different setting   Andreas Bießmann
• [U-Boot] [U-Boot,2/2] mmc: atmel_mci: add mmc card support   Andreas Bießmann
• [U-Boot] [U-Boot,v2] at91sam9260ek: move board id setup to config header   Andreas Bießmann
• [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command   Wolfgang Denk
• [U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE   Peter Korsgaard
• [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Peter Korsgaard
• [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash   Peter Korsgaard
• [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape   Peter Korsgaard
• [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.   Peter Korsgaard
• [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.   Peter Korsgaard
• [U-Boot] [PATCH] wandboard: fix typo in README   Luka Perkov
• [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v6 0/4] usb: add Faraday EHCI & Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v6 3/4] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v6 4/4] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [RFC PATCH 0/7] RFC: Add Kbuild system to U-Boot   Simon Glass
• [U-Boot] [RFC PATCH 1/7] Add some required Kconfig files   Simon Glass
• [U-Boot] [RFC PATCH 2/7] arm: Allow start.o to come from any directory   Simon Glass
• [U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently   Simon Glass
• [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material   Simon Glass
• [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot   Simon Glass
• [U-Boot] [RFC PATCH 6/7] Enable Kconfig for U-Boot   Simon Glass
• [U-Boot] [RFC PATCH 7/7] Switch over to Kbuild   Simon Glass
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Masahiro Yamada
• [U-Boot] [RFC PATCH] patman: Do not hardcode python path   Simon Glass
• [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors   Simon Glass
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Marek Vasut
• [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable   Marek Vasut
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Bo Shen
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Marek Vasut
• [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Birje
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Rajeshwari Birje
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files   Masahiro Yamada
• [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.   Sonic Zhang
• [U-Boot] [PATCH v1 2/3] blackfin: Add memory virtual console to blackfin serial driver.   Sonic Zhang
• [U-Boot] [PATCH v1 3/3] blackfin: Uart divisor should be set after their values are generated.   Sonic Zhang
• [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console   Rajeshwari Birje
• [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.   Mike Frysinger
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5   Simon Glass
• [U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer   Rajeshwari Birje
• [U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5   Akshay Saraswat
• [U-Boot] [PATCH 0/4 v2] Exynos5: Add cpu freq and tmu throttling   Akshay Saraswat
• [U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686   Akshay Saraswat
• [U-Boot] [PATCH 2/4 v2] Exynos5: cpufreq: Implement frequency scaling for exynos5   Akshay Saraswat
• [U-Boot] [PATCH 3/4 v2] smdk5250: enable support for tmu throttling   Akshay Saraswat
• [U-Boot] [PATCH 4/4 v2] Exynos5: config: enable cpu freq   Akshay Saraswat
• [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.   Sonic Zhang
• [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error   Bo Shen
• [U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support   Bo Shen
• [U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices   Bo Shen
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Albert ARIBAUD
• [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   ying.zhang at freescale.com
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Zhang Ying-B40530
• [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch   Sonic Zhang
• [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command   Sonic Zhang
• [U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch   Sonic Zhang
• [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command   Sonic Zhang
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v7 0/4] usb: add Faraday EHCI & Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v7 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v7 2/4] usb: ehci: add weak-aliased function for PORTSC   Kuo-Jung Su
• [U-Boot] [PATCH v7 3/4] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v7 4/4] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Andreas Bießmann
• [U-Boot] avr32: fix relocation address calculation   Andreas Bießmann
• [U-Boot] [PULL] please pull u-boot-avr32/master   Andreas Bießmann
• [U-Boot] [PATCH 0/3] ARM: atmel: add sama5d3xek board support   Bo Shen
• [U-Boot] [PATCH 1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register   Bo Shen
• [U-Boot] [PATCH 2/3] USB: ohci-at91: support sama5d3x devices   Bo Shen
• [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d3xek support   Bo Shen
• [U-Boot] avr32: fix relocation address calculation   Andreas Bießmann
• [U-Boot] [PATCH] Makefile: move the common makefile line out of the CONFIG_SPL_BUILD ifdef   ying.zhang at freescale.com
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Bo Shen
• [U-Boot] [PULL] please pull u-boot-atmel/master   Albert ARIBAUD
• [U-Boot] [PATCH 0/3] ARM: at91: fix and update README.at91 file   Bo Shen
• [U-Boot] [PATCH 1/3] ARM: at91: fix and update README.at91 document   Bo Shen
• [U-Boot] [PATCH 2/3] ARM: at91: add at91sam9x5 and sama5d3x information   Bo Shen
• [U-Boot] [PATCH 3/3] ARM: at91: add NAND partition table and index   Bo Shen
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files   Wolfgang Denk
• [U-Boot] [PATCH 1/2] usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSize   Vivek Gautam
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Vivek Gautam
• [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files   Masahiro Yamada
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Kyungmin Park
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Albert ARIBAUD
• [U-Boot] [PATCH] avr32: fix relocation address calculation   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Vivek Gautam
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Albert ARIBAUD
• [U-Boot] [PATCH 0/2] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.   SARTRE Leo
• [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.   SARTRE Leo
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Łukasz Dałek
• [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Tom Rini
• [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash   Tom Rini
• [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.   Stefano Babic
• [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.   Stefano Babic
• [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH v1 0/2] OMAP3+: introduce generic Adaptive Body Bias Support   Andrii Tseglytskyi
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH v1 2/2] OMAP5: add ABB setup for MPU voltage domain   Andrii Tseglytskyi
• [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL   Scott Wood
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.   Eric Bénard
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.   SARTRE Leo
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Marek Vasut
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Marek Vasut
• [U-Boot] [PATCH] usb: asix: Move software resets to basic_init   Marek Vasut
• [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash   Tom Rini
• [U-Boot] [PATCH v02 0/2] OMAP3+: introduce generic Adaptive Body Bias Support   Andrii Tseglytskyi
• [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain   Andrii Tseglytskyi
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Tom Warren
• [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd   Julius Werner
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Allen Martin
• [U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly   Tom Rini
• [U-Boot] [PATCH v2 2/7] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE   Tom Rini
• [U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info   Tom Rini
• [U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Tom Rini
• [U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks   Tom Rini
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCHv3 0/6] Falcon boot mode for spl_mmc   Peter Korsgaard
• [U-Boot] [PATCHv3 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging   Peter Korsgaard
• [U-Boot] [PATCHv3 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out   Peter Korsgaard
• [U-Boot] [PATCHv3 3/6] spl_mmc: add Falcon mode support for FAT variant   Peter Korsgaard
• [U-Boot] [PATCHv3 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument   Peter Korsgaard
• [U-Boot] [PATCHv3 5/6] spl_mmc: add Falcon mode support for raw variant   Peter Korsgaard
• [U-Boot] [PATCHv3 6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand   Peter Korsgaard
• [U-Boot] [v2] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support   Andy Fleming
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Tom Rini
• [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support   York Sun
• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Tom Rini
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] [PULL] please pull u-boot-avr32/master   Tom Rini
• [U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast   Tom Rini
• [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam   Tom Rini
• [U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short.   Tom Rini
• [U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC   Tom Rini
• [U-Boot] [PATCH] usb: asix: Move software resets to basic_init   Joe Hershberger
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Joe Hershberger
• [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot   Tom Rini
• [U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command   Tom Rini
• [U-Boot] da850-evm: MMC-SD query   Tom Rini
• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot   Simon Glass
• [U-Boot] [PATCH] usb: asix: Move software resets to basic_init   Marek Vasut
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Tom Rini
• [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.   Wolfgang Denk
• [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam   Wolfgang Denk
• [U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast   Wolfgang Denk
• [U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC   Wolfgang Denk
• [U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short.   Wolfgang Denk
• [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support   Andy Fleming
• [U-Boot] [Patch v2, batch 3 08/17] powerpc/85xx: fix build error introduced by serdes_get_prtcl   Andy Fleming
• [U-Boot] 2013 Plumber's CFP: Fastboot   Mehaffey, John
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Bo Shen
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v2] arm: fix a comment   Masahiro Yamada
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Allen Martin
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Marek Vasut
• [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks   Tom Warren
• [U-Boot] [PATCH v8 0/4] usb: add Faraday EHCI & Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v8 1/4] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC   Kuo-Jung Su
• [U-Boot] [PATCH v8 3/4] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v8 4/4] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree   Stephen Warren
• [U-Boot] [PATCH V2 2/2] ARM: bcm2835: add simplefb DT node during bootz/m   Stephen Warren
• [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Zhang Ying-B40530
• [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board   Renato Frias
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset   Renato Frias
• [U-Boot] [PATCH v2] arm: fix a comment   Albert ARIBAUD
• [U-Boot] Pull request v2: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment   ying.zhang at freescale.com
• [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment   ying.zhang at freescale.com
• [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count   Hu Mingkai-B21284
• [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code   Naveen Krishna Ch
• [U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] Your message to U-Boot awaits moderator approval   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Alison Wang
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Alison Wang
• [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v2 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v2 5/6] arm: mvf600: Add uart support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Alison Wang
• [U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam   Wolfgang Denk
• [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment   Wolfgang Denk
• [U-Boot] Your message to U-Boot awaits moderator approval   Wolfgang Denk
• [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Tom Rini
• [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Piotr Wilczek
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize   Marek Vasut
• [U-Boot] 2013 Plumber's CFP: Fastboot   Thomas Petazzoni
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] Wrong RAM Size on Devkit8000   Maxime Ripard
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Benoît Thébaudeau
• [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count   Fleming Andy-AFLEMING
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] 2013 Plumber's CFP: Fastboot   richard -rw- weinberger
• [U-Boot] fatwrite problem   Ruud Commandeur
• [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Benoît Thébaudeau
• [U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code.   Benoît Thébaudeau
• [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds   Benoît Thébaudeau
• [U-Boot] fatwrite problem   Tom Rini
• [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables   Albert ARIBAUD
• [U-Boot] Question: issues for usb keyboard work with OHCI HCD   Marek Vasut
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] 2013 Plumber's CFP: Fastboot   Mehaffey, John
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] hush variable expansion & quoting   Henrik Nordström
• [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Benoît Thébaudeau
• [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds   Benoît Thébaudeau
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Gabbasov, Andrew
• [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure   Andrew Gabbasov
• [U-Boot] [PATCH] tegra: always build u-boot-nodtb-tegra.bin   Stephen Warren
• [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree   Stephen Warren
• [U-Boot] [PATCH v3, batch 3 01/17] common: Update cmd_bdinfo for PPC   York Sun
• [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error   Michael Heimpold
• [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree   Simon Glass
• [U-Boot] Pull request v2: u-boot-blackfin   Tom Rini
• [U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox   Sascha Silbe
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH 00/10] PXE support updates   Rob Herring
• [U-Boot] [PATCH 0/5] Optimize ARM relocation   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] arm: generalize lib/bss.c into lib/sections.c   Albert ARIBAUD
• [U-Boot] [PATCH 2/5] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH 0/5] Optimize ARM relocation   Albert ARIBAUD
• [U-Boot] [PATCH 00/10] PXE support updates   Joe Hershberger
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree   Simon Glass
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated   Benoît Thébaudeau
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Benoît Thébaudeau
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Vadim Bendebury
• [U-Boot] [v3] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board   Otavio Salvador
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
• [U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store   Henrik Nordström
• [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH 0/5] Optimize ARM relocation   Benoît Thébaudeau
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board   Fabio Estevam
• [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error   Bo Shen
• [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error   Bo Shen
• [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT   Zhang Ying-B40530
• [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v2] Makefile: move the common makefile line to public area   ying.zhang at freescale.com
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Axel Lin
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Marek Vasut
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Marek Vasut
• [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi   Kuo-Jung Su
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Shawn Guo
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Sricharan R
• [U-Boot] [PATCH v3] powerpc/mpc85xx: modify the function clear_bss and the end address of the BSS   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   ying.zhang at freescale.com
• [U-Boot] [PATCH v9 0/5] usb: add Faraday EHCI & Gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access   Kuo-Jung Su
• [U-Boot] [PATCH v9 2/5] usb: ehci: add weak-aliased function for PORTSC   Kuo-Jung Su
• [U-Boot] [PATCH v9 3/5] usb: hub: make minimum power-on delay configurable   Kuo-Jung Su
• [U-Boot] [PATCH v9 4/5] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine   Albert ARIBAUD
• [U-Boot] Wrong RAM Size on Devkit8000   Andreas Bießmann
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] [PATCH 0/5] Optimize ARM relocation   Albert ARIBAUD
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Stefano Babic
• [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600   Stefano Babic
• [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Stefano Babic
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v3] cosmetic: arm: fix comments in arch/arm/lib/crt0.S   Masahiro Yamada
• [U-Boot] [PATCH v2] arm: fix a comment   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Stefano Babic
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Sricharan R
• [U-Boot] Limitations/Considerations when programming U-Boot   Oliver Stäbler
• [U-Boot] [PATCH] powerpc/p1022ds: boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] 2013 Plumber's CFP: Fastboot   Jeremiah Foster
• [U-Boot] mx23-olinuxino: occasional memory errors   Kiril Zyapkov
• [U-Boot] env-variable setting in u-boot-function   Altunbas Sabri (DC-IA/EAH2)
• [U-Boot] Unable to understand flow of U-Boot Code.   Rajdeep Vaghasia
• [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset   Stefano Babic
• [U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250   Hung-ying Tyan
• [U-Boot] [PATCH v5 1/7] cros: add cros_ec driver   Hung-ying Tyan
• [U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver   Hung-ying Tyan
• [U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts   Hung-ying Tyan
• [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250   Hung-ying Tyan
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Sricharan R
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Stefano Babic
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220   Tom Rini
• [U-Boot] [v3] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] OMAP5: Enable USB Ethernet support with LAN9730   Tom Rini
• [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox   Tom Rini
• [U-Boot] [U-Boot, v3, 01/12] mkimage: Put FIT loading in function and tidy error handling   Tom Rini
• [U-Boot] u-boot UBI support   Tom Rini
• [U-Boot] smc911x: fix the timeout detection   Tom Rini
• [U-Boot] drivers/mmc: move spl_mmc.c to common/spl   Tom Rini
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Lennart Poettering
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Albert ARIBAUD
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] Samsung patches pending   Simon Glass
• [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.   Simon Glass
• [U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686   Simon Glass
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Stefano Babic
• [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree   Simon Glass
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Benoît Thébaudeau
• [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Benoît Thébaudeau
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Mathias leblanc
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Lucas De Marchi
• [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Tom Rini
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Tom Rini
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600   Benoît Thébaudeau
• [U-Boot] 答复: [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Stefano Babic
• [U-Boot] [PATCH] mmc and fat bug fixes   Ruud Commandeur
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Stephen Warren
• [U-Boot] [PATCH] OMAP5: Enable access to auxclk registers   Lubomir Popov
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Jeremiah Foster
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   Lubomir Popov
• [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Mehaffey, John
• [U-Boot] ARM v7: Flush icache when executing a program with go   Albert ARIBAUD
• [U-Boot] mx23-olinuxino: occasional memory errors   Otavio Salvador
• [U-Boot] [PATCH] mmc and fat bug fixes   Benoît Thébaudeau
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Vadim Bendebury
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Nishanth Menon
• [U-Boot] mx23-olinuxino: occasional memory errors   Kiril Zyapkov
• [U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263   Simon Glass
• [U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp   Simon Glass
• [U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions   Simon Glass
• [U-Boot] [PATCH v4 4/9] main: Move boot_delay code into its own function   Simon Glass
• [U-Boot] [PATCH v4 5/9] main: Use get/setenv_ulong()   Simon Glass
• [U-Boot] [PATCH v4 6/9] main: Fix typos and checkpatch warnings in command line reading   Simon Glass
• [U-Boot] [PATCH v4 7/9] main: Correct header order   Simon Glass
• [U-Boot] [PATCH v4 8/9] main: Add debug_parser() to avoid #ifdefs   Simon Glass
• [U-Boot] [PATCH v4 9/9] main: Add debug_bootkeys to avoid #ifdefs   Simon Glass
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp   Joe Hershberger
• [U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions   Joe Hershberger
• [U-Boot] ARM v7: Flush icache when executing a program with go   Albert ARIBAUD
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment   Scott Wood
• [U-Boot] ARM v7: Flush icache when executing a program with go   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86   Simon Glass
• [U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox   Simon Glass
• [U-Boot] Unable to understand flow of U-Boot Code.   Vikram Narayanan
• [U-Boot] ARM v7: Flush icache when executing a program with go   Albert ARIBAUD
• [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store   Simon Glass
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v5 1/7] cros: add cros_ec driver   Simon Glass
• [U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec   Simon Glass
• [U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec   Simon Glass
• [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec   Simon Glass
• [U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver   Simon Glass
• [U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts   Simon Glass
• [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250   Simon Glass
• [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation   Rob Herring
• [U-Boot] [PATCH 02/10] net: calxedaxgmac: enable rx cut-thru   Rob Herring
• [U-Boot] [PATCH 03/10] ARM: highbank: update config options   Rob Herring
• [U-Boot] [PATCH 04/10] ARM: highbank: fix get_tbclk value to timer rate   Rob Herring
• [U-Boot] [PATCH 05/10] ARM: highbank: set timer prescaler to 256   Rob Herring
• [U-Boot] [PATCH 06/10] ARM: highbank: avoid bss write in timer_init   Rob Herring
• [U-Boot] [PATCH 07/10] ARM: highbank: enable reset on command timeout   Rob Herring
• [U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status   Rob Herring
• [U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off   Rob Herring
• [U-Boot] [PATCH 10/10] highbank: enable keyed autoboot stop   Rob Herring
• [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation   Albert ARIBAUD
• [U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly   Peter Korsgaard
• [U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info   Peter Korsgaard
• [U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT   Peter Korsgaard
• [U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks   Peter Korsgaard
• [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec   Simon Glass
• [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store   Henrik Nordström
• [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation   Rob Herring
• [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store   Henrik Nordström
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Tom Rini
• [U-Boot] [PATCH] mmc and fat bug fixes   Andy Fleming
• [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store   Simon Glass
• [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error   Andy Fleming
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   Andy Fleming
• [U-Boot] [PATCH] powerpc/mpc85xx: work around erratum A-006593   Scott Wood
• [U-Boot] mx23-olinuxino: occasional memory errors   Fabio Estevam
• [U-Boot] [PATCH] mmc and fat bug fixes   Tom Rini
• [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam   Scott Wood
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error   Tom Rini
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   Tom Rini
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   Scott Wood
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Axel Lin
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Axel Lin
• [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store   Henrik Nordström
• [U-Boot] [PATCH] powerpc/c29xpcie: add readme document for c29xpcie   Po Liu
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count   Mingkai Hu
• [U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count   Hu Mingkai-B21284
• [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Wang Huan-B18965
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Stephen Warren
• [U-Boot] mx23-olinuxino: occasional memory errors   Tsvetan Usunov, OLIMEX Ltd
• [U-Boot] mx23-olinuxino: occasional memory errors   Tsvetan Usunov, OLIMEX Ltd
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Minkyu Kang
• [U-Boot] [PATCH] mmc and fat bug fixes   Wolfgang Denk
• [U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build   Axel Lin
• [U-Boot] ARM v7: Flush icache when executing a program with go   Wolfgang Denk
• [U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] OMAP5: uEVM: Fix pinmux for USB support   Lubomir Popov
• [U-Boot] [PATCH] mmc and fat bug fixes   Ruud Commandeur
• [U-Boot] Limitations/Considerations when programming U-Boot   Romain Izard
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH v4] common/Makefile: Add new symbol CONFIG_SPL_ENV_xxx for environment in SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH] mmc and fat bug fixes   Ruud Commandeur
• [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation   Albert ARIBAUD
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   Zhang Ying-B40530
• [U-Boot] ulpi patch in uboot   Stefano Babic
• [U-Boot] mx23-olinuxino: occasional memory errors   Otavio Salvador
• [U-Boot] mx23-olinuxino: occasional memory errors   Otavio Salvador
• [U-Boot] ulpi patch in uboot   Michael Trimarchi
• [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/4] tx25: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/4] arm: do not compile relocate_code() for SPL builds   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] mx23-olinuxino: occasional memory errors   Fabio Estevam
• [U-Boot] Booting u-boot for versatile in qemu fails   Thierry Bultel
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Tom Rini
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Lennart Poettering
• [U-Boot] hush variable expansion & quoting   Henrik Nordström
• [U-Boot] mx23-olinuxino: occasional memory errors   Tsvetan Usunov, OLIMEX Ltd
• [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code   Tom Rini
• [U-Boot] mx23-olinuxino: occasional memory errors   Fabio Estevam
• [U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Tom Rini
• [PATCH] omap-ulpi: Fix the omap3/4 access function to the bus   Michael Trimarchi
• [U-Boot] ulpi patch in uboot   Michael Trimarchi
• [U-Boot] ARM v7: Flush icache when executing a program with go   Tom Rini
• [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access   Heiko Schocher
• [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] Please pull u-boot-mmc.git   Tom Rini
• [U-Boot] ulpi patch in uboot   Igor Grinberg
• [U-Boot] Booting u-boot for versatile in qemu fails   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Peter Korsgaard
• [U-Boot] ulpi patch in uboot   Stefano Babic
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Peter Korsgaard
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] ulpi patch in uboot   Michael Trimarchi
• [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot   Mehaffey, John
• [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board   Stefano Babic
• [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Tom Rini
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] [PATCH] README: Correct reference for CONFIG_SUPPORT_RAW_INITRD   Tom Rini
• [U-Boot] [PATCH 03/10] ARM: highbank: update config options   Tom Rini
• [U-Boot] [PATCH] imx: spl: Merge libimx-common make rules   Stefano Babic
• [U-Boot] Wrong RAM Size on Devkit8000   Maxime Ripard
• [U-Boot] [PATCH 1/3] mx28evk: Add splash screen support   Stefano Babic
• [U-Boot] [PATCH 2/3] mx23evk: Add splash screen support   Stefano Babic
• [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes   Stefano Babic
• [U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status   Tom Rini
• [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine   Benoît Thébaudeau
• [U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board   SARTRE Leo
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
• [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] Booting u-boot for versatile in qemu fails   Thierry Bultel
• [U-Boot] disassembler ?   Brad Walker
• [U-Boot] Booting u-boot for versatile in qemu fails   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] disassembler ?   Albert ARIBAUD
• [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3   Matt Sealey
• [U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build   Stephen Warren
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   menon.nishanth at gmail.com
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Peter Korsgaard
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Peter Korsgaard
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   Lubomir Popov
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   menon.nishanth at gmail.com
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Tom Rini
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Tom Rini
• [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape   Peter Korsgaard
• [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.   Peter Korsgaard
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   Lubomir Popov
• [U-Boot] [ANN] SPI Custodian   Tom Rini
• [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver   menon.nishanth at gmail.com
• [U-Boot] ARM v7: Flush icache when executing a program with go   Wolfgang Denk
• [U-Boot] disassembler ?   Wolfgang Denk
• [U-Boot] u-boot USB question   Lance Beck
• [U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor   Simon Glass
• [U-Boot] [PATCH v3 01/10] bootstage: Introduce sub-IDs for use with image loading   Simon Glass
• [U-Boot] [PATCH v3 02/10] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building   Simon Glass
• [U-Boot] [PATCH v3 03/10] image: Introduce fit_image_load() to load images from FITs   Simon Glass
• [U-Boot] [PATCH v3 04/10] image: Use fit_image_load() to load ramdisk   Simon Glass
• [U-Boot] [PATCH v3 05/10] image: Use fit_image_load() to load FDT   Simon Glass
• [U-Boot] [PATCH v3 06/10] sandbox: Adjust bootm command to work with sandbox   Simon Glass
• [U-Boot] [PATCH v3 07/10] image: Use fit_image_load() to load kernel   Simon Glass
• [U-Boot] [PATCH v3 08/10] sandbox: image: Adjust FIT image printing to work with sandbox   Simon Glass
• [U-Boot] [PATCH v3 09/10] bootstage: Remove unused entries related to kernel/ramdisk/fdt load   Simon Glass
• [U-Boot] [PATCH v3 10/10] sandbox: image: Create a test for loading FIT images   Simon Glass
• [U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor   Simon Glass
• [U-Boot] u-boot USB question   Bo Shen
• [U-Boot] u-boot USB question   Lance Beck
• [U-Boot] [PATCH v5] Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   ying.zhang at freescale.com
• [U-Boot] u-boot USB question   Bo Shen
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   ying.zhang at freescale.com
• [U-Boot] u-boot USB question   Michael Trimarchi
• [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO   Simon Glass
• [U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus.   Michael Trimarchi
• [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store   Simon Glass
• [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO   Marek Vasut
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Sricharan R
• [U-Boot] u-boot USB question   Andreas Bießmann
• [U-Boot] [PATCH 0/2] fix flash_get_info function   Masahiro Yamada
• [U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator   Masahiro Yamada
• [U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input   Masahiro Yamada
• [U-Boot] [ANN] SPI Custodian   Stefan Roese
• [U-Boot] u-boot USB question   Andreas Bießmann
• [U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263   Andreas Bießmann
• [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program   Masahiro Yamada
• [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program   Stefan Roese
• [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)   André Schaller
• [U-Boot] [PATCH] board/b4860qds: Relax NOR flash teadc timing parameter   Prabhakar Kushwaha
• [U-Boot] mx23-olinuxino: occasional memory errors   Tsvetan Usunov, OLIMEX Ltd
• [U-Boot] [PATCH] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define   Prabhakar Kushwaha
• [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program   Masahiro Yamada
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   ying.zhang at freescale.com
• [U-Boot] [PATCH v3] Makefile: move the common makefile line to public area   ying.zhang at freescale.com
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed   Jim Lin
• [U-Boot] [PATCH 0/4 V5] SMDK5250: FDT: Add device tree support for console   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V5] EXYNOS5: FDT: Add compatible strings for Serial   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V5] EXYNOS5: FDT: Add serial device node values   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V5] S5P: Serial: Add fdt support to driver   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V5] CONFIG: EXYNOS5: Enable silent console   Rajeshwari Shinde
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] [PATCH 0/2 V2] EXYNOS: Support a delay after deactivate for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V2] EXYNOS: Export timer_get_us() to get microsecond timer   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V2] EXYNOS: SPI: Support a delay after deactivate   Rajeshwari Shinde
• [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v3 01/12] pmic:max77686: add function to set voltage and mode   Piotr Wilczek
• [U-Boot] [PATCH v3 02/12] drivers:power:max77693: add support for new multi function pmic max77693   Piotr Wilczek
• [U-Boot] [PATCH v3 03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH v3 04/12] i2c:multi_i2c: adapt file to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH v3 05/12] power: fix pmic command   Piotr Wilczek
• [U-Boot] [PATCH v3 06/12] drivers:power:power_i2c: adapt file to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH v3 07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH v3 08/12] drivers:video:s6e8ax0: change data_to_send array to static   Piotr Wilczek
• [U-Boot] [PATCH v3 09/12] drivers:lcd: fix unaligned access on lcd   Piotr Wilczek
• [U-Boot] [PATCH v3 10/12] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v3 11/12] board:VCMA9 switch to ne i2c framework   Piotr Wilczek
• [U-Boot] [PATCH v3 12/12] board:smdk5250: switch to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain   Nishanth Menon
• [U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board   Otavio Salvador
• [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Piotr Wilczek
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Tom Rini
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Stefano Babic
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Stefano Babic
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] Building two different "SPL" for the same board?   Henrik Nordström
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Jerry Van Baren
• [U-Boot] Building two different "SPL" for the same board?   Tom Rini
• [U-Boot] [PATCH] mmc and fat bug fixes   Andy Fleming
• [U-Boot] Building two different "SPL" for the same board?   Henrik Nordström
• [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL   Tom Rini
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Tom Warren
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Scott Wood
• [U-Boot] [u-boot-mips] gp init and -pie option   Jason Harris
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU 1 of Tegra114   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: support SKU 7 of Tegra20   Stephen Warren
• [U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed   Stephen Warren
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7   Scott Wood
• [U-Boot] [PATCH] post: new parallel nor flash test   Mathieu Clavette
• [U-Boot] [PATCH v4 00/10] Bring in new I2C framework   Heiko Schocher
• [U-Boot] [PATCH v4 01/10] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
• [U-Boot] [PATCH v4 02/10] i2c: common changes for multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v4 03/10] i2c, soft-i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v4 04/10] i2c, fsl_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v4 05/10] i2c, multibus: get rid of CONFIG_I2C_MUX   Heiko Schocher
• [U-Boot] [PATCH v4 06/10] i2c, multibus, keymile: get rid of EEprom_ivm envvariable   Heiko Schocher
• [U-Boot] [PATCH v4 07/10] tegra: i2c: Add function to know about current bus   Heiko Schocher
• [U-Boot] [PATCH v4 08/10] tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [PATCH v4 09/10] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality   Heiko Schocher
• [U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality   Prafulla Wadaskar
• [U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4   Henrik Nordström
• [U-Boot] load file to memory in standalone program   Scott A
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Tom Rini
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Simon Glass
• [U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4   Simon Glass
• [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL   Joel A Fernandes
• [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL   Tom Rini
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Albert ARIBAUD
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Lubomir Popov
• [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)   Gilles Chanteperdrix
• [U-Boot] load file to memory in standalone program   Henrik Nordström
• [U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus.   Igor Grinberg
• [U-Boot] [PATCH] Fix device detection for API consumers   Ilya Bakulin
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/4] mx31pdk: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/4] tx25: copy SPL directly, not using relocate_code.   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/4] arm: do not compile relocate_code() for SPL builds   Albert ARIBAUD
• [U-Boot] [PATCH v4 4/4] arm: factorize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Benoît Thébaudeau
• [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support   Marek Vasut
• [U-Boot] [PATCH] disk: Fix possible out-of-bounds access in part_efi.c   Marek Vasut
• [U-Boot] ARM v7: Flush icache when executing a program with go   Kuo-Jung Su
• [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH] ppc: ppmc7xx: Fix possible out-of-bound access   Marek Vasut
• [U-Boot] [PATCH 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area   ying.zhang at freescale.com
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   ying.zhang at freescale.com
• [U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH v3 0/9] Bring in new I2C framework   Piotr Wilczek
• [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.   Michael Trimarchi
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.   Igor Grinberg
• [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.   Michael Trimarchi
• [U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B   Minkyu Kang
• [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [U-boot]: MMC: add sdhci generic framework   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Benoît Thébaudeau
• [U-Boot] [PATCH 0/2] Add ccache support   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache   Marek Vasut
• [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache   Marek Vasut
• [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache   Marek Vasut
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Scott Wood
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Michael Heimpold
• [U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [U-boot]: MMC: add sdhci generic framework   Rommel Custodio
• [U-Boot] U-Boot configuration on LM3S8962 problem   Xaut Jzd
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [U-boot]: MMC: add sdhci generic framework   Jagan Teki
• [U-Boot] [PATCH] cmd_mem: fix cp command   Masahiro Yamada
• [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5   Minkyu Kang
• [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2   Minkyu Kang
• [U-Boot] [PATCH v03 0/2] OMAP3+: introduce generic Adaptive Body Bias Support   Andrii Tseglytskyi
• [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH v03 2/2] OMAP5: add ABB setup for MPU voltage domain   Andrii Tseglytskyi
• [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Alison Wang
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Alison Wang
• [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v3 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v3 5/6] arm: mvf600: Add uart support for Vybrid MVF600   Alison Wang
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Alison Wang
• [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot,1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register   Andreas Bießmann
• [U-Boot] [U-Boot,2/3] USB: ohci-at91: support sama5d3x devices   Andreas Bießmann
• [U-Boot] [U-Boot,3/3] ARM: atmel: add sama5d3xek support   Andreas Bießmann
• [U-Boot] [U-Boot,1/3] ARM: at91: fix and update README.at91 document   Andreas Bießmann
• [U-Boot] [U-Boot,2/3] ARM: at91: add at91sam9x5 and sama5d3x information   Andreas Bießmann
• [U-Boot] [U-Boot,3/3] ARM: at91: add NAND partition table and index   Andreas Bießmann
• [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] Exynos5: clock: Update the equation to calculate PLL output frequency   Minkyu Kang
• [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h   Stefan Roese
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo   Minkyu Kang
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] ARM v7: Flush icache when executing a program with go   Wolfgang Denk
• [U-Boot] load file to memory in standalone program   Wolfgang Denk
• [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode   Minkyu Kang
• [U-Boot] load file to memory in standalone program   Wolfgang Denk
• [U-Boot] ARM v7: Flush icache when executing a program with go   Wolfgang Denk
• [U-Boot] ARM v7: Flush icache when executing a program with go   Kees Jongenburger
• [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache   Wolfgang Denk
• [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache   Wolfgang Denk
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Wolfgang Denk
• [U-Boot] [PATCH 0/3] Add Arndale board support   Minkyu Kang
• [U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode   Piotr Wilczek
• [U-Boot] Issue in DWMMC in mainline   Rajeshwari Birje
• [U-Boot] [PATCH] drivers:power:max77693: add support for new multi function pmic max77693   Piotr Wilczek
• [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B   Jagan Teki
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Fabio Estevam
• [U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Fabio Estevam
• [U-Boot] Issue in DWMMC in mainline   Jagan Teki
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache   Marek Vasut
• [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] ARM v7: Flush icache when executing a program with go   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Jagan Teki
• [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Benoît Thébaudeau
• [U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600   Benoît Thébaudeau
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 2/9] mx53loco: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 3/9] mx51evk: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 4/9] mx53ard: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 5/9] mx53evk: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 6/9] mx53smd: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 7/9] mx6qarm2: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 8/9] mx6qsabrelite: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 9/9] mx6qsabresd: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Michael Heimpold
• [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Tom Warren
• [U-Boot] [PATCH] Fix device detection for API consumers   Jeroen Hofstee
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Otavio Salvador
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Otavio Salvador
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Otavio Salvador
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Scott Wood
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS   Scott Wood
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode   Marek Vasut
• [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access   Marek Vasut
• [U-Boot] MPC834x U-Boot problem   davewellz-wurk at yahoo.co.uk
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH 1/3] mmc: report capacity for the selected partition   Stephen Warren
• [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards   Stephen Warren
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Wolfgang Denk
• [U-Boot] [PATCH v2] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R   Rob Herring
• [U-Boot] [PATCH v2] ARM: highbank: setup peripherals based on power domain status   Rob Herring
• [U-Boot] [PATCH v2] ARM: highbank: update config options   Rob Herring
• [U-Boot] [PATCH v2] ARM: move interrupt_init to before relocation   Rob Herring
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] Questions about U-boot of customized MPC8315E board   Scott Wood
• [U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command   Scott Wood
• [U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   Scott Wood
• [U-Boot] [PATCH] p1020rdb-pd: platform support   Scott Wood
• [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports   Rob Herring
• [U-Boot] [PATCH 2/7] ahci: fix unaligned access   Rob Herring
• [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry   Rob Herring
• [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function   Rob Herring
• [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up   Rob Herring
• [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec   Rob Herring
• [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions   Rob Herring
• [U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V   Kim Phillips
• [U-Boot] [PATCH v2 1/2] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit   Axel Lin
• [U-Boot] [PATCH v2 2/2] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build   Axel Lin
• [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid   Fabio Estevam
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Kuo-Jung Su
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS   Zhang Ying-B40530
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Wang Huan-B18965
• [U-Boot] Issue in DWMMC in mainline   Jaehoon Chung
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Wang Huan-B18965
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Wang Huan-B18965
• [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600   Wang Huan-B18965
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support   Wang Huan-B18965
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Stefan Roese
• [U-Boot] [PATCH] common: board_f: Do not call board_postclk_init twice   Masahiro Yamada
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Bo Shen
• [U-Boot] [PULL] please pull u-boot-atmel/master   Albert ARIBAUD
• [U-Boot] [PATCH] mmc write bug fix   Ruud Commandeur
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Sergey Yanovich
• [U-Boot] [PATCH] da830: add MMC support   Vishwanathrao Badarkhe, Manish
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Marek Vasut
• [U-Boot] [PATCH v3 00/10] MIPS: initial support for emulated Malta board   Gabor Juhos
• [U-Boot] [PATCH v3 01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board   Gabor Juhos
• [U-Boot] [PATCH v3 02/10] MIPS: qemu-malta: add reset support   Gabor Juhos
• [U-Boot] [PATCH v3 03/10] MIPS: qemu-malta: enable flash support   Gabor Juhos
• [U-Boot] [PATCH v3 04/10] MIPS: import gt64120.h header from Linux   Gabor Juhos
• [U-Boot] [PATCH v3 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON   Gabor Juhos
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Gabor Juhos
• [U-Boot] [PATCH v3 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses   Gabor Juhos
• [U-Boot] [PATCH v3 08/10] MIPS: qemu-malta: bring up ethernet   Gabor Juhos
• [U-Boot] [PATCH v3 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code   Gabor Juhos
• [U-Boot] [PATCH v3 10/10] MIPS: start.S: emulate REVISION register for qemu-malta   Gabor Juhos
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Mats Kärrman
• [U-Boot] [U-Boot, v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Tom Rini
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] .gitignore: add GNU GLOBAL files   Tom Rini
• [U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86   Tom Rini
• [U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox   Tom Rini
• [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Gabbasov, Andrew
• [U-Boot] Building two different "SPL" for the same board?   Tom Rini
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Mark Jackson
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Scott Wood
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET   Tom Rini
• [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET   Stephen Warren
• [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET   Tom Rini
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Michael Heimpold
• [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()   Stephen Warren
• [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC   Stephen Warren
• [U-Boot] [PATCH V2 2/4] mmc: report capacity for the selected partition   Stephen Warren
• [U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET   Stephen Warren
• [U-Boot] [PATCH V2 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards   Stephen Warren
• [U-Boot] [PATCH 1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support   Andy Fleming
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Daniel Schwierzeck
• [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] nand/fsl_elbc: detect page size at runtime   Scott Wood
• [U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7   Wolfgang Denk
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Tom Rini
• [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks   Scott Wood
• [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks   Scott Wood
• [U-Boot] mtd: nand: fix the partial page write condition   Scott Wood
• [U-Boot] mtd: nand: use ssize_t instead of size_t to prevent infinite loop   Scott Wood
• [U-Boot] nand/fsl_ifc: Convert to self-init   Scott Wood
• [U-Boot] [u-boot-mips] gp init and -pie option   Jason Harris
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Zhang Ying-B40530
• [U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL   Zhang Ying-B40530
• [U-Boot] Uboot Analysis Question   Yong Yun Toh
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board   Wang Huan-B18965
• [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure   Stefan Roese
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Andreas Bießmann
• [U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC   Peter Korsgaard
• [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH] SPI: Winbond: Add W25Q32 to spi flash table   Jagan Teki
• [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW   Jagan Teki
• [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure   Stefan Roese
• [U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator   Stefan Roese
• [U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input   Stefan Roese
• [U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET   Peter Korsgaard
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] U-Boot code git versions problem   Balaji N
• [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support   Andrii Tseglytskyi
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Jagan Teki
• [U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards   Shaohui Xie
• [U-Boot] FW: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Jagan Teki
• [U-Boot] Building two different "SPL" for the same board?   Henrik Nordström
• [U-Boot] U-Boot code git versions problem   Jagan Teki
• [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range   Jérôme Arzel
• [U-Boot] Building two different "SPL" for the same board?   Albert ARIBAUD
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Kuo-Jung Su
• [U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards   Shaohui Xie
• [U-Boot] [PATCH v3 0/4] ARM: vexpress: add support for more core tiles   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/1] ARM: Add Seagate GoFlex Home support   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections   Albert ARIBAUD
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Jagan Teki
• [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support   Albert ARIBAUD
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] why patch work cannot catch my patch   Xie Shaohui-B21989
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Gabor Juhos
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Marc Zyngier
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support   Nishanth Menon
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Peter Maydell
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Rajeshwari Shinde
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Daniel Schwierzeck
• [U-Boot] Can not get linux prompt using sandbox   Christian Hyep
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL   Tom Rini
• [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections   Tom Rini
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Tom Rini
• [U-Boot] [PATCH V9 7/9] MMC: APIs to support resize of EMMC boot partition   Michael Pratt
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Alim Akhtar
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Benoît Thébaudeau
• [U-Boot] disassembler ?   Brad Walker
• [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram   Mike Dunn
• [U-Boot] [PATCH 1/2] wandboard: Enable HDMI splashscreen   Fabio Estevam
• [U-Boot] [PATCH 2/2] wandboard: Disable data cache   Fabio Estevam
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jagan Teki
• [U-Boot] disassembler ?   Albert ARIBAUD
• [U-Boot] disassembler ?   Peter Barada
• [U-Boot] [PATCH 2/2] wandboard: Disable data cache   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] wandboard: Disable data cache   Fabio Estevam
• [U-Boot] disassembler ?   Albert ARIBAUD
• [U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it   Stephen Warren
• [U-Boot] Building two different "SPL" for the same board?   Tom Rini
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Stephen Warren
• [U-Boot] [PATCH V3 2/4] mmc: report capacity for the selected partition   Stephen Warren
• [U-Boot] [PATCH V3 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET   Stephen Warren
• [U-Boot] [PATCH V3 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards   Stephen Warren
• [U-Boot] disassembler ?   Peter Barada
• [U-Boot] disassembler ?   Wolfgang Denk
• [U-Boot] [PATCH 2/2] wandboard: Disable data cache   Wolfgang Denk
• [U-Boot] [PATCH 2/2] wandboard: Disable data cache   Fabio Estevam
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Joe Hershberger
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Peter Korsgaard
• [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()   Stephen Warren
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: only enable SCU on Tegra20   Stephen Warren
• [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format   Andy Fleming
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Peter Korsgaard
• [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format   Andy Fleming
• [U-Boot] [PATCH] mx6slevk: Allow booting a device tree kernel   Fabio Estevam
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Kuo-Jung Su
• [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash   Kuo-Jung Su
• [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices   Bo Shen
• [U-Boot] Building two different "SPL" for the same board?   Henrik Nordström
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jaehoon Chung
• [U-Boot] [PATCH] da830: add MMC support   Vishwanathrao Badarkhe, Manish
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jaehoon Chung
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jagan Teki
• [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot   Rajeshwari Birje
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Rajeshwari Birje
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Wang Huan-B18965
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jaehoon Chung
• [U-Boot] [PATCH] drivers:video:s6e8ax0: change data_to_send array to static   Piotr Wilczek
• [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd   Piotr Wilczek
• [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jagan Teki
• [U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V3 1/3] power:battery: add battery support for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V3 2/3] i2c:multi_i2c: add new macros I2C_7 and I2C_8   Piotr Wilczek
• [U-Boot] [PATCH V3 3/3] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation   Rajeshwari Shinde
• [U-Boot] [PATCH 0/2 V3] SPI: Enable SPI_PREAMBLE Mode   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V3] SPI: Add support for preamble bytes   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V3] EXYNOS: SPI: Support SPI_PREAMBLE mode   Rajeshwari Shinde
• [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function   Tom Rini
• [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports   Tom Rini
• [U-Boot] [PATCH 2/7] ahci: fix unaligned access   Tom Rini
• [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry   Tom Rini
• [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up   Tom Rini
• [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec   Tom Rini
• [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions   Tom Rini
• [U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V4] SPI: Add support for preamble bytes   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V4] EXYNOS: SPI: Support SPI_PREAMBLE mode   Rajeshwari Shinde
• [U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it   Tom Rini
• [U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode   Jagan Teki
• [U-Boot] [PATCH] cmd_mem: fix cp command   Tom Rini
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Tom Rini
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Stephen Warren
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Tom Rini
• [U-Boot] [PATCH] da830: add MMC support   Tom Rini
• [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC   Tom Warren
• [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area   Tom Rini
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH v2] OMAP4/5: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd   Wolfgang Denk
• [U-Boot] [PATCH 2/7] ahci: fix unaligned access   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd   Jeroen Hofstee
• [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support   Gabor Juhos
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Tom Rini
• [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range   Scott Wood
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Jagan Teki
• [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW   Jagan Teki
• [U-Boot] [PATCH] usb: ehci: add missing cache managment   Stephen Warren
• [U-Boot] [PATCH] usb: ehci: add missing cache managment   Marek Vasut
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH] buildman: Allow make flags to be specified for each board   Simon Glass
• [U-Boot] Micron eMMC problem on sabre SD like card   jean-francois simon
• [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash   Jagan Teki
• [U-Boot] [PATCH] SF: Add Spansion S25FL064P IDs   Jagan Teki
• [U-Boot] [PATCH] sf: spansion: Add support for S25FL128S   Jagan Teki
• [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
• [U-Boot] [PATCH 4/4] sf: winbond: Add support for W25Q256   Jagan Teki
• [U-Boot] [PATCH 0/4] sf: Accessing > 16MBytes flashes in existing 3-byte addr mode.   Jagan Teki
• [U-Boot] [PATCH] powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE   Axel Lin
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH 0/6] nds32: fix build errors/warnings   Gabor Juhos
• [U-Boot] [PATCH 1/6] nds32: introduce macros for bit manipulation   Gabor Juhos
• [U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined   Gabor Juhos
• [U-Boot] [PATCH 3/6] block: constify sect_buf argument of ide_write_data   Gabor Juhos
• [U-Boot] [PATCH 4/6] pci: add prototype for pci_ftpci_init() function   Gabor Juhos
• [U-Boot] [PATCH 5/6] pci: move pci_ftpci100.h to include/faraday/ftpci100.h   Gabor Juhos
• [U-Boot] [PATCH 6/6] nds32: adp-ag102: use 'faraday/ftpci100.h' for pci_ftpci_init   Gabor Juhos
• [U-Boot] [PATCH] OMAP5: Fix bug in omap5_es1_prcm struct   Lubomir Popov
• [U-Boot] [PATCH v4 00/10] Add Marvell Dove and SolidRun CuBox support   Sascha Silbe
• [U-Boot] [PATCH v4 01/10] ARM: dove: add support for Marvell Dove SoC   Sascha Silbe
• [U-Boot] [PATCH v4 02/10] usb: ehci-marvell: add support for second USB controller   Sascha Silbe
• [U-Boot] [PATCH v4 03/10] GPIO: add gpio driver for Dove SoCs   Sascha Silbe
• [U-Boot] [PATCH v4 04/10] MMC: sdhci: Add support for dove sdhci   Sascha Silbe
• [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver   Sascha Silbe
• [U-Boot] [PATCH v4 06/10] block: mvsata: add dove include   Sascha Silbe
• [U-Boot] [PATCH v4 07/10] NET: phy: add 88E1310 PHY initialization   Sascha Silbe
• [U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support   Sascha Silbe
• [U-Boot] [PATCH v4 09/10] NET: mvgbe: add support for Dove   Sascha Silbe
• [U-Boot] [PATCH v4 10/10] Boards: Add support for SolidRun CuBox   Sascha Silbe
• [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()   Simon Glass
• [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()   Simon Glass
• [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct   Lubomir Popov
• [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation   Simon Glass
• [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()   Wolfgang Denk
• [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()   Simon Glass
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K   Chris Packham
• [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material   Masahiro Yamada
• [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material   Simon Glass
• [U-Boot] [PATCH] da830: add MMC support   Vishwanathrao Badarkhe, Manish
• [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation   Jaehoon Chung
• [U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support   Prafulla Wadaskar
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Tapani Utriainen
• [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 0/2] fix displaying IRQ stack info   Masahiro Yamada
• [U-Boot] [PATCH 1/2] arm: fix displaying IRQ stack info   Masahiro Yamada
• [U-Boot] [PATCH 2/2] common: arm: fix displaying IRQ stack info   Masahiro Yamada
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Rajeshwari Birje
• [U-Boot] i2c loop command   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K   Xie Shaohui-B21989
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Jagan Teki
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Stefano Babic
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Jagan Teki
• [U-Boot] dfu: dfu and UBI Volumes   Lukasz Majewski
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] i2c loop command   Heiko Schocher
• [U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined   Kuo-Jung Su
• [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range   Jérôme Arzel
• [U-Boot] [PATCH] OpenRD: relocate environment to 640kB   Sascha Silbe
• [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K   Chris Packham
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Fabio Estevam
• [U-Boot] [PATCH] generic_board: reduce the redundancy of gd_t struct members   Masahiro Yamada
• [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd   Piotr Wilczek
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Otavio Salvador
• [U-Boot] minimum bdi config to read flash on 85xx   Monica
• [U-Boot] minimum bdi config to read flash on 85xx   Fabio Estevam
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Simon Glass
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Otavio Salvador
• [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo   Otavio Salvador
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Simon Glass
• [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo   Otavio Salvador
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Otavio Salvador
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [PATCH 0/5] sf: Code cleanup patch set   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/5] sf: eon|spansion|ramtron: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/5] sf: sst: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/5] sf: stmicro: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/5] sf: Fix line over 80 chars cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 5/5] cmd_sf: Fix code cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 0/6] sf: spansion|winbond: ID table corrections/updates   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 1/6] sf: spansion: Update the name for S25FL256S flash   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 2/6] sf: winbond: Add support for W25Q80BW   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 3/6] sf: winbond: Correct the nr_blocks used for W25Q32DW   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 4/6] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 5/6] sf: winbond: Add support for W25Q128FW   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH 6/6] sf: winbond: Add support for W25Q16DW   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 0/2] cmd_sf: print message support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 1/2] cmd_sf: Add print mesg for 'sf erase' command   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 2/2] cmd_sf: Add print mesgs on sf read/write commands   Jagannadha Sutradharudu Teki
• [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes   Jagannadha Sutradharudu Teki
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Wolfgang Denk
• [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Wolfgang Denk
• [U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Otavio Salvador
• [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo   Otavio Salvador
• [U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching   Otavio Salvador
• [U-Boot] [PATCH v3 2/2] wandboard: Add Boot Splash image with Wandboard logo   Otavio Salvador
• [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Otavio Salvador
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material   Masahiro Yamada
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()   Stephen Warren
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()   Michael Trimarchi
• [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()   Stephen Warren
• [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()   Stephen Warren
• [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections   Albert ARIBAUD
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree   Stephen Warren
• [U-Boot] [PATCH V2 REPOST 2/2] ARM: bcm2835: add simplefb DT node during bootz/m   Stephen Warren
• [U-Boot] minimum bdi config to read flash on 85xx   Monica
• [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards   Wolfgang Denk
• [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Rajeshwari Birje
• [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd   Nikita Kiryanov
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K   Xie Shaohui-B21989
• [U-Boot] [HELP]: sf: winbond: add W25Q32   Jagan Teki
• [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B   Jagan Teki
• [U-Boot] [PATCH v2 0/6] Optimize ARM relocation   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/6] remove all references to .dynsym   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/6] arm: generalize lib/bss.c into lib/sections.c   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH v2 5/6] arm: make __rel_dyn_{start, end} compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/6] arm: optimize relocate_code routine   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] SF: Add Spansion S25FL064P IDs   Jagan Teki
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Tapani Utriainen
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Tapani Utriainen
• [U-Boot] [U-Boot, v2] sf: winbond: Add support for W25PXX SPI flash   Jagan Teki
• [U-Boot] [U-Boot,4/4] sf: winbond: Add support for W25Q256   Jagan Teki
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH v2] Add support for Wandboard quad.   Tapani Utriainen
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Stefano Babic
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Wang Huan-B18965
• [U-Boot] [PATCH v4 0/7] arm: vf610: Add Freescale Vybrid VF610 CPU and VF610TWR board support   Alison Wang
• [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610   Alison Wang
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Alison Wang
• [U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610   Alison Wang
• [U-Boot] [PATCH v4 4/7] arm: vf610: Add watchdog support for Vybrid VF610   Alison Wang
• [U-Boot] [PATCH v4 5/7] arm: vf610: Add uart support for Vybrid VF610   Alison Wang
• [U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document   Alison Wang
• [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board   Alison Wang
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Wang Huan-B18965
• [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support   Stefano Babic
• [U-Boot] about uboot leads to LAN disconnected   wanghgsz
• [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Wolfgang Denk
• [U-Boot] [PATCH v2] Add support for Wandboard quad.   Otavio Salvador
• [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad   Otavio Salvador
• [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes   Jagan Teki
• [U-Boot] Soft_spi questions   laurent vaudoit
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Albert ARIBAUD
• [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function   Rajeshwari Birje
• [U-Boot] [PATCH] da830: add MMC support   Tom Rini
• [U-Boot] Soft_spi questions   Jagan Teki
• [U-Boot] [PATCH v3 0/2] cmd_sf: print message support   Tom Rini
• [U-Boot] Soft_spi questions   laurent vaudoit
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [PATCH V2] input: simplify key_matrix_decode_fdt()   Stephen Warren
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range   Jérôme Arzel
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] dfu: dfu and UBI Volumes   Benoît Thébaudeau
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] dfu: dfu and UBI Volumes   Benoît Thébaudeau
• [U-Boot] dfu: dfu and UBI Volumes   Pantelis Antoniou
• [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations   Benoît Thébaudeau
• [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated   Benoît Thébaudeau
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations   Albert ARIBAUD
• [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material   Tom Rini
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command   Fabio Estevam
• [U-Boot] SF: Add Spansion S25FL064P IDs   Marek Vasut
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command   Otavio Salvador
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command   Fabio Estevam
• [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610   Benoît Thébaudeau
• [U-Boot] [PATCH] mx27: add function enable_caches   Philippe Reynes
• [U-Boot] [PATCH] mx27: add i2c clock   Philippe Reynes
• [U-Boot] [PATCH] mx27: add missing constant for mx27   Philippe Reynes
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610   Benoît Thébaudeau
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Simon Glass
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command   Fleming Andy-AFLEMING
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Tom Warren
• [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] dfu: dfu and UBI Volumes   Wolfgang Denk
• [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct   Tom Rini
• [U-Boot] [PATCH 0/5] sf: Code cleanup patch set   Tom Rini
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH] powerpc/pixis: Fix pixis help message   York Sun
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH v2] SPL: Makefile: Build a separate autoconf.mk for SPL   Joel A Fernandes
• [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW   Allen Martin
• [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot   Masahiro Yamada
• [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW   Jagan Teki
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Zhang Ying-B40530
• [U-Boot] dfu: dfu and UBI Volumes   Heiko Schocher
• [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610   Wang Huan-B18965
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Wang Huan-B18965
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Wang Huan-B18965
• [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board   Wang Huan-B18965
• [U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V5] spi: exynos: Support SPI_PREAMBLE mode   Rajeshwari Shinde
• [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610   Stefano Babic
• [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot   Rajeshwari Birje
• [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option   Gabor Juhos
• [U-Boot] [PATCH 0/3] ARM: OMAP4+: Misc Cleanup   Lokesh Vutla
• [U-Boot] [PATCH 1/3] ARM: OMAP4+: Cleanup header files   Lokesh Vutla
• [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks   Lokesh Vutla
• [U-Boot] [PATCH 3/3] ARM: OMAP4+: pmic: Make generic bus init and write functions   Lokesh Vutla
• [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH 01/12] ARM: DRA7xx: Add control id code for DRA7xx   Lokesh Vutla
• [U-Boot] [PATCH 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC   Lokesh Vutla
• [U-Boot] [PATCH 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC   Lokesh Vutla
• [U-Boot] [PATCH 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages   Lokesh Vutla
• [U-Boot] [PATCH 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH 06/12] ARM: DRA7xx: Change the Debug UART to UART1   Lokesh Vutla
• [U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ   Lokesh Vutla
• [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address   Lokesh Vutla
• [U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1   Lokesh Vutla
• [U-Boot] [PATCH 10/12] ARM: DRA7xx: Update pinmux data   Lokesh Vutla
• [U-Boot] [PATCH 11/12] ARM: DRA7xx: clocks: Update PLL values   Lokesh Vutla
• [U-Boot] [PATCH 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board   Lokesh Vutla
• [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards   Jagan Teki
• [U-Boot] dfu: dfu and UBI Volumes   Tom Rini
• [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot   Tom Rini
• [U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently   Tom Rini
• [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks   Tom Rini
• [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances   Fabio Estevam
• [U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ   Tom Rini
• [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address   Tom Rini
• [U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1   Tom Rini
• [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's   Tom Rini
• [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks   Sricharan R
• [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address   Sricharan R
• [U-Boot] U-Boot OMAP issues   Lubomir Popov
• [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address   Tom Rini
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board   Benoît Thébaudeau
• [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610   Benoît Thébaudeau
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Simon Glass
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Simon Glass
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality   Scott Wood
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] fopen/fwrite functions   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode   Simon Glass
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Simon Glass
• [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot   Simon Glass
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH 0/2 V3] exynos: Support a delay after deactivate for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2 V3] exynos: Export timer_get_us() to get microsecond timer   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate   Rajeshwari Shinde
• [U-Boot] [PATCH V2] spi: exynos: Minimise access to SPI FIFO level   Rajeshwari Shinde
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Simon Glass
• [U-Boot] [PATCH V2] spi: exynos: Support word transfers   Rajeshwari Shinde
• [U-Boot] [PATCH V2] exynos: spl: Add a custom spi copy function   Rajeshwari Shinde
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] fopen/fwrite functions   Wolfgang Denk
• [U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree   Vishwanathrao Badarkhe, Manish
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Wolfgang Denk
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Andrew Gabbasov
• [U-Boot] In U-Boot-2013-01, __stringify is not working   Balaji N
• [U-Boot] fopen/fwrite functions   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Dirk Behme
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Gabbasov, Andrew
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Dirk Behme
• [U-Boot] [PATCH V2 0/4] ARM: OMAP2+: Misc Cleanup   Lokesh Vutla
• [U-Boot] [PATCH V2 1/4] ARM: OMAP4+: Cleanup header files   Lokesh Vutla
• [U-Boot] [PATCH V2 2/4] ARM: OMAP5: clocks: Do not enable sgx clocks   Lokesh Vutla
• [U-Boot] [PATCH V2 3/4] ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h   Lokesh Vutla
• [U-Boot] [PATCH V2 4/4] ARM: OMAP4+: pmic: Make generic bus init and write functions   Lokesh Vutla
• [U-Boot] fopen/fwrite functions   Wolfgang Denk
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Albert ARIBAUD
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Tom Rini
• [U-Boot] In U-Boot-2013-01, __stringify is not working   Wolfgang Denk
• [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH V2 01/12] ARM: DRA7xx: Add control id code for DRA7xx   Lokesh Vutla
• [U-Boot] [PATCH V2 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC   Lokesh Vutla
• [U-Boot] [PATCH V2 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC   Lokesh Vutla
• [U-Boot] [PATCH V2 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages   Lokesh Vutla
• [U-Boot] [PATCH V2 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's   Lokesh Vutla
• [U-Boot] [PATCH V2 06/12] ARM: DRA7xx: Change the Debug UART to UART1   Lokesh Vutla
• [U-Boot] [PATCH V2 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ   Lokesh Vutla
• [U-Boot] [PATCH V2 08/12] ARM: DRA7xx: Correct SRAM END address   Lokesh Vutla
• [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1   Lokesh Vutla
• [U-Boot] [PATCH V2 10/12] ARM: DRA7xx: Update pinmux data   Lokesh Vutla
• [U-Boot] [PATCH V2 11/12] ARM: DRA7xx: clocks: Update PLL values   Lokesh Vutla
• [U-Boot] [PATCH V2 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board   Lokesh Vutla
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Bo Shen
• [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes   Simon Glass
• [U-Boot] [PATCH v2 0/8] sf: spansion|winbond: ID table corrections/updates   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 1/8] sf: spansion: Update the name for S25FL256S flash   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/8] sf: spansion: Add support for S25FL128S_64K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 3/8] sf: winbond: Add support for W25Q80BW   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 4/8] sf: winbond: Correct the nr_blocks used for W25Q32DW   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 6/8] sf: winbond: Add support for W25Q128FW   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 7/8] sf: winbond: Add support for W25Q16DW   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 8/8] sf: winbond: Add support for W25QXXXFV   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1   Lubomir Popov
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Gabbasov, Andrew
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Tom Rini
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal   Andrew Gabbasov
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select   Gabbasov, Andrew
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Tom Rini
• [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Albert ARIBAUD
• [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option   Daniel Schwierzeck
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Simon Glass
• [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option   Gabor Juhos
• [U-Boot] [PATCH v2] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option   Gabor Juhos
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Tom Rini
• [U-Boot] JFFS2 seems to drop nand data with ECC corrections   passal
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Albert ARIBAUD
• [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men   Stephen Warren
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] [U-Boot,v2] mtd: resync with Linux-3.7.1   Scott Wood
• [U-Boot] [PATCH] Add splash screen support via loading from flash   Robert Winkler
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal   Robert Winkler
• [U-Boot] [PATCH] Add splash screen support via loading from flash   Wolfgang Denk
• [U-Boot] [PATCH] Add splash screen support via loading from flash   Robert Winkler
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Christoffer Dall
• [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge   Simon Glass
• [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state   Christoffer Dall
• [U-Boot] fopen/fwrite functions   TigerLiu at viatech.com.cn
• [U-Boot] readl / writel function questions   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution   Christoffer Dall
• [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal   Dirk Behme
• [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch   Christoffer Dall
• [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode   Christoffer Dall
• [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support   Christoffer Dall
• [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] TFTP timeouts, i.mx fec problem?   Ruud Commandeur
• [U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S   Xie Xiaobo
• [U-Boot] [PATCH] Add splash screen support via loading from flash   Wolfgang Denk
• [U-Boot] TFTP timeouts, i.mx fec problem?   Wolfgang Denk
• [U-Boot] TFTP timeouts, i.mx fec problem?   Stefano Babic
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Stefano Babic
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution   Andre Przywara
• [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot   Masahiro Yamada
• [U-Boot] TFTP timeouts, i.mx fec problem?   Ruud Commandeur
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image   Piotr Wilczek
• [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot   Tom Rini
• [U-Boot] [PATCH v2 00/16] sf: Update sf framework to support all sizes of flashes   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 01/16] sf: Add bank address register writing support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 02/16] sf: Add bank address register reading support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 03/16] sf: Add extended addr write support for winbond|stmicro   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 04/16] sf: Add extended addr read support for winbond|stmicro   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 05/16] sf: read flash bank addr register at probe time   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 07/16] sf: Update sf read to support all sizes of flashes   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 08/16] sf: Use spi_flash_addr() in write call   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 09/16] sf: stmicro: Add support for N25Q512   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 10/16] sf: stmicro: Add support for N25Q512A   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 11/16] sf: stmicro: Add support for N25Q1024   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 12/16] sf: stmicro: Add support for N25Q1024A   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 13/16] sf: spansion: Add support for S25FL512S_256K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 14/16] sf: Use spi_flash_read_common() in write status poll   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 15/16] sf: Remove spi_flash_cmd_poll_bit()   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support   Jagannadha Sutradharudu Teki
• [U-Boot] TFTP timeouts, i.mx fec problem?   Ruud Commandeur
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Tom Rini
• [U-Boot] TFTP timeouts, i.mx fec problem?   Wolfgang Denk
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Tom Rini
• [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image   Wolfgang Denk
• [U-Boot] TFTP timeouts, i.mx fec problem?   Ruud Commandeur
• [U-Boot] TFTP timeouts, i.mx fec problem?   Stefano Babic
• [U-Boot] TFTP timeouts, i.mx fec problem?   Stefano Babic
• [U-Boot] [Patch v2] powerpc/pixis: Fix pixis help message   York Sun
• [U-Boot] TFTP timeouts, i.mx fec problem?   Fabio Estevam
• [U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S   Jagan Teki
• [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support   Benoît Thébaudeau
• [U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
• [U-Boot] [PATCH] Add splash screen support via loading from flash   Robert Winkler
• [U-Boot] [PATCH 1/3] omap-common/hwinit-common.c: Mark omap_rev_string as static   Tom Rini
• [U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END   Tom Rini
• [U-Boot] [PATCH 3/3] am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c   Tom Rini
• [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range   Scott Wood
• [U-Boot] TFTP timeouts, i.mx fec problem?   Wolfgang Denk
• [U-Boot] TFTP timeouts, i.mx fec problem?   Wolfgang Denk
• [U-Boot] [PATCH V4] ARM: OMAP: I2C: New read, write and probe functions   Lubomir Popov
• [U-Boot] TFTP timeouts, i.mx fec problem?   Troy Kisky
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END   Peter Korsgaard
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] Pull request: nand flash   Scott Wood