[U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Marek Vasut
marex at denx.de
Fri May 3 16:12:43 CEST 2013
Dear Fabio Estevam,
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as per
> FSL bootlets code.
>
> mx23 Reference Manual mark HW_DRAM_CTL27 and HW_DRAM_CTL28 as "reserved".
>
> HW_DRAM_CTL8 is setup as the last element.
>
> So skip the initialization of these DRAM_CTL registers.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v3:
> - Use continue
> Changes since v2:
> - None
> Changes since v1:
> - To avoid polluting the mx28 case, separate the function definition in
> mx23 and for mx28.
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index df25535..e599f31 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> @@ -110,6 +110,7 @@ __weak void mxs_adjust_memory_params(uint32_t
> *dram_vals) {
> }
>
> +#ifdef CONFIG_MX28
> static void initialize_dram_values(void)
> {
> int i;
> @@ -118,15 +119,27 @@ static void initialize_dram_values(void)
>
> for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
> writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
> +}
> +#else
> +static void initialize_dram_values(void)
> +{
> + int i;
> +
> + mxs_adjust_memory_params(dram_vals);
> +
> + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
I dunno if I should be bitching some more, but you have double (()) below. Some
comment just here won't hurt, but whatever.
> + if ((i == 8 || i == 27 || i == 28 || i == 35))
> + continue;
> + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
> + }
>
> -#ifdef CONFIG_MX23
> /*
> * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
> * element to be set
> */
> writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
> -#endif
> }
> +#endif
>
> static void mxs_mem_init_clock(void)
> {
Best regards,
Marek Vasut
More information about the U-Boot
mailing list