May 2013 Archives by author
Starting: Wed May 1 00:28:26 CEST 2013
Ending: Fri May 31 23:44:45 CEST 2013
Messages: 2394
- [U-Boot] env-variable setting in u-boot-function
Altunbas Sabri (DC-IA/EAH2)
- [U-Boot] load file to memory in standalone program
Scott A
- [U-Boot] [ARM] [STATUS] Resuming activity
Albert ARIBAUD
- [U-Boot] Pull request - zynq
Albert ARIBAUD
- [U-Boot] Pull request - fpga
Albert ARIBAUD
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Albert ARIBAUD
- [U-Boot] Pull request - zynq
Albert ARIBAUD
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Albert ARIBAUD
- [U-Boot] Pull request - fpga
Albert ARIBAUD
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Factorize ARM relocation code
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] Rename arch/arm/lib/bss.c to sections.c
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH 3/4] arm: make relocation section symbols compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa.git/master
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx - correction done
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Albert ARIBAUD
- [U-Boot] [PULL] please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Albert ARIBAUD
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Albert ARIBAUD
- [U-Boot] [PATCH v2] arm: fix a comment
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 0/5] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH 1/5] arm: generalize lib/bss.c into lib/sections.c
Albert ARIBAUD
- [U-Boot] [PATCH 2/5] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 0/5] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] [PATCH 0/5] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] ARM v7: Flush icache when executing a program with go
Albert ARIBAUD
- [U-Boot] ARM v7: Flush icache when executing a program with go
Albert ARIBAUD
- [U-Boot] ARM v7: Flush icache when executing a program with go
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation
Albert ARIBAUD
- [U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off
Albert ARIBAUD
- [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v3 2/4] tx25: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/4] arm: do not compile relocate_code() for SPL builds
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] Booting u-boot for versatile in qemu fails
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] Booting u-boot for versatile in qemu fails
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] disassembler ?
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v4 2/4] tx25: copy SPL directly, not using relocate_code.
Albert ARIBAUD
- [U-Boot] [PATCH v4 3/4] arm: do not compile relocate_code() for SPL builds
Albert ARIBAUD
- [U-Boot] [PATCH v4 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] ARM v7: Flush icache when executing a program with go
Albert ARIBAUD
- [U-Boot] [PULL] please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure
Albert ARIBAUD
- [U-Boot] Building two different "SPL" for the same board?
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] ARM: vexpress: add support for more core tiles
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/1] ARM: Add Seagate GoFlex Home support
Albert ARIBAUD
- [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
Albert ARIBAUD
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] disassembler ?
Albert ARIBAUD
- [U-Boot] disassembler ?
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] [PATCH v2 2/6] remove all references to .dynsym
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/6] arm: generalize lib/bss.c into lib/sections.c
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v2 5/6] arm: make __rel_dyn_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v2 6/6] arm: optimize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Albert ARIBAUD
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Albert ARIBAUD
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Alim Akhtar
- [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
Adnan Ali
- [U-Boot] [PATCH 1/2 v12] Enable Btrfs support in mx53loco config
Adnan Ali
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Adnan Ali
- [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
Adnan Ali
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Adnan Ali
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Adnan Ali
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] Please pull u-boot-mpc85xx.git
Fleming Andy-AFLEMING
- [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation
Fleming Andy-AFLEMING
- [U-Boot] Please pull u-boot-mpc85xx.git
Fleming Andy-AFLEMING
- [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count
Fleming Andy-AFLEMING
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fleming Andy-AFLEMING
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] dfu: dfu and UBI Volumes
Pantelis Antoniou
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Jérôme Arzel
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Jérôme Arzel
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Jérôme Arzel
- [U-Boot] Mircron MT46* SDRAM support
Karolis B.
- [U-Boot] [PATCH] Fix references to the documentation files
Stefano Babic
- [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Stefano Babic
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Stefano Babic
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Stefano Babic
- [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable
Stefano Babic
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k
Stefano Babic
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Stefano Babic
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Stefano Babic
- [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3
Stefano Babic
- [U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured
Stefano Babic
- [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V
Stefano Babic
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Stefano Babic
- [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads
Stefano Babic
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Stefano Babic
- [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO
Stefano Babic
- [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver
Stefano Babic
- [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK
Stefano Babic
- [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver
Stefano Babic
- [U-Boot] [PATCH 2/4] arm: mxs: Add LCDIF registers for i.MX233
Stefano Babic
- [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] problem about PING error from PC to u-boot
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx - correction
Stefano Babic
- [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.
Stefano Babic
- [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.
Stefano Babic
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Stefano Babic
- [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600
Stefano Babic
- [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Stefano Babic
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset
Stefano Babic
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Stefano Babic
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Stefano Babic
- [U-Boot] 答复: [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Stefano Babic
- [U-Boot] ulpi patch in uboot
Stefano Babic
- [U-Boot] ulpi patch in uboot
Stefano Babic
- [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board
Stefano Babic
- [U-Boot] [PATCH] imx: spl: Merge libimx-common make rules
Stefano Babic
- [U-Boot] [PATCH 1/3] mx28evk: Add splash screen support
Stefano Babic
- [U-Boot] [PATCH 2/3] mx23evk: Add splash screen support
Stefano Babic
- [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes
Stefano Babic
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Stefano Babic
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Stefano Babic
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Stefano Babic
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Stefano Babic
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Stefano Babic
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Stefano Babic
- [U-Boot] TFTP timeouts, i.mx fec problem?
Stefano Babic
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Stefano Babic
- [U-Boot] TFTP timeouts, i.mx fec problem?
Stefano Babic
- [U-Boot] TFTP timeouts, i.mx fec problem?
Stefano Babic
- [U-Boot] Fwd: da850-evm: MMC-SD query
Manish Badarkhe
- [U-Boot] da850-evm: MMC-SD query
Manish Badarkhe
- [U-Boot] [PATCH] Fix device detection for API consumers
Ilya Bakulin
- [U-Boot] Your message to U-Boot awaits moderator approval
Peter Barada
- [U-Boot] disassembler ?
Peter Barada
- [U-Boot] disassembler ?
Peter Barada
- [U-Boot] [PATCH v3 07/17] fdt: Add a parameter to fdt_valid()
Jerry Van Baren
- [U-Boot] [PATCH v3 09/17] fdt: Allow fdt command to check and update control FDT
Jerry Van Baren
- [U-Boot] [PATCH v3 10/17] sandbox: fdt: Support fdt command for sandbox
Jerry Van Baren
- [U-Boot] [PATCH v3 11/17] fdt: Skip checking FDT if the pointer is NULL
Jerry Van Baren
- [U-Boot] [PATCH v3 12/17] Revert "fdt- Tell the FDT library where the device tree is"
Jerry Van Baren
- [U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
Jerry Van Baren
- [U-Boot] Pull request: u-boot-fdt
Jerry Van Baren
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Jerry Van Baren
- [U-Boot] u-boot USB question
Lance Beck
- [U-Boot] u-boot USB question
Lance Beck
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Dirk Behme
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Dirk Behme
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Dirk Behme
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Dirk Behme
- [U-Boot] [PATCH v2 1/2] spi: mxc_spi: Fix pre and post divider calculation
Dirk Behme
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Dirk Behme
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Dirk Behme
- [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32
Dirk Behme
- [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32
Dirk Behme
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Dirk Behme
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Dirk Behme
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Dirk Behme
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Dirk Behme
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
Dirk Behme
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Vadim Bendebury
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Vadim Bendebury
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Vadim Bendebury
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Vadim Bendebury
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Vadim Bendebury
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Vadim Bendebury
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Andreas Bießmann
- [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry
Andreas Bießmann
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Andreas Bießmann
- [U-Boot] Uboot question from Newbee
Andreas Bießmann
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Andreas Bießmann
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Andreas Bießmann
- [U-Boot] [PATCH v2] at91sam9260ek: move board id setup to config header
Andreas Bießmann
- [U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices
Andreas Bießmann
- [U-Boot] [Patch v2 3/4] SPI: atmel_spi: support sama5d3x devices
Andreas Bießmann
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Andreas Bießmann
- [U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support
Andreas Bießmann
- [U-Boot] [Patch v2 3/3] ARM: at91sam9n12: add network support with ksz8851_16mll
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt
Andreas Bießmann
- [U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition
Andreas Bießmann
- [U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 1/3] spi: atmel_spi: using ip version to check whether has wdrbt
Andreas Bießmann
- [U-Boot] [U-Boot,v4,2/3] arm: at91: add at91sam9n12 register definition
Andreas Bießmann
- [U-Boot] [U-Boot,v4,3/3] arm: at91: add at91sam9n12ek board support
Andreas Bießmann
- [U-Boot] [U-Boot,1/2] arm: at91: enable mci support for at91sam9g20ek.
Andreas Bießmann
- [U-Boot] [U-Boot, 2/2] arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card
Andreas Bießmann
- [U-Boot] [U-Boot,1/2] mmc: atmel_mci: using IP version for different setting
Andreas Bießmann
- [U-Boot] [U-Boot,2/2] mmc: atmel_mci: add mmc card support
Andreas Bießmann
- [U-Boot] [U-Boot,v2] at91sam9260ek: move board id setup to config header
Andreas Bießmann
- [U-Boot] [PULL] please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Andreas Bießmann
- [U-Boot] avr32: fix relocation address calculation
Andreas Bießmann
- [U-Boot] [PULL] please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] avr32: fix relocation address calculation
Andreas Bießmann
- [U-Boot] Wrong RAM Size on Devkit8000
Andreas Bießmann
- [U-Boot] u-boot USB question
Andreas Bießmann
- [U-Boot] u-boot USB question
Andreas Bießmann
- [U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
Andreas Bießmann
- [U-Boot] [U-Boot,1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register
Andreas Bießmann
- [U-Boot] [U-Boot,2/3] USB: ohci-at91: support sama5d3x devices
Andreas Bießmann
- [U-Boot] [U-Boot,3/3] ARM: atmel: add sama5d3xek support
Andreas Bießmann
- [U-Boot] [U-Boot,1/3] ARM: at91: fix and update README.at91 document
Andreas Bießmann
- [U-Boot] [U-Boot,2/3] ARM: at91: add at91sam9x5 and sama5d3x information
Andreas Bießmann
- [U-Boot] [U-Boot,3/3] ARM: at91: add NAND partition table and index
Andreas Bießmann
- [U-Boot] [PULL] please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Andreas Bießmann
- [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.
Rajeshwari Birje
- [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.
Rajeshwari Birje
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Rajeshwari Birje
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Rajeshwari Birje
- [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console
Rajeshwari Birje
- [U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer
Rajeshwari Birje
- [U-Boot] Issue in DWMMC in mainline
Rajeshwari Birje
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Rajeshwari Birje
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Rajeshwari Birje
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Rajeshwari Birje
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Rajeshwari Birje
- [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function
Rajeshwari Birje
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Rajeshwari Birje
- [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX
Holger Brunck
- [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable
Holger Brunck
- [U-Boot] [PATCH] arm/km: fix u-boot update functionality
Holger Brunck
- [U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V
Holger Brunck
- [U-Boot] [PATCH 2/2] powerpc/83xx/km: make local functions and structs static
Holger Brunck
- [U-Boot] [PATCH] arm/km: make local functions static
Holger Brunck
- [U-Boot] representing multi-socket CPU platform in .dts
Curt Brune
- [U-Boot] Booting u-boot for versatile in qemu fails
Thierry Bultel
- [U-Boot] Booting u-boot for versatile in qemu fails
Thierry Bultel
- [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
Venu Byravarasu
- [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.
Eric Bénard
- [U-Boot] [PATCH] avr32: fix relocation address calculation
Michael Cashwell
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Naveen Krishna Ch
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Naveen Krishna Ch
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Naveen Krishna Ch
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Gilles Chanteperdrix
- [U-Boot] Regression from v2013.04-rc3 with sdcard detection
Nicolas Chauvet
- [U-Boot] Regression from v2013.04-rc3 with sdcard detection
Jaehoon Chung
- [U-Boot] [PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] Issue in DWMMC in mainline
Jaehoon Chung
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jaehoon Chung
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jaehoon Chung
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jaehoon Chung
- [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jaehoon Chung
- [U-Boot] [PATCH] post: new parallel nor flash test
Mathieu Clavette
- [U-Boot] fatwrite problem
Ruud Commandeur
- [U-Boot] [PATCH] mmc and fat bug fixes
Ruud Commandeur
- [U-Boot] [PATCH] mmc and fat bug fixes
Ruud Commandeur
- [U-Boot] [PATCH] mmc and fat bug fixes
Ruud Commandeur
- [U-Boot] [PATCH] mmc write bug fix
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] [U-boot]: MMC: add sdhci generic framework
Rommel Custodio
- [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch
Christoffer Dall
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Christoffer Dall
- [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state
Christoffer Dall
- [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution
Christoffer Dall
- [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch
Christoffer Dall
- [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Christoffer Dall
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Christoffer Dall
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Łukasz Dałek
- [U-Boot] [PATCH] mpc512x: remove dead code
Wolfgang Denk
- [U-Boot] [PATCH] mpc5200: a3m071/a4m2k: Enable flash verify option
Wolfgang Denk
- [U-Boot] [PATCH 1/2 v2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct
Wolfgang Denk
- [U-Boot] [PATCH 2/2 v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes
Wolfgang Denk
- [U-Boot] [PULL] : Please pull u-boot-mpc5xxx
Wolfgang Denk
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Wolfgang Denk
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Wolfgang Denk
- [U-Boot] [PATCH] itest: Add bitwise and operator
Wolfgang Denk
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Wolfgang Denk
- [U-Boot] Compiling U-BOOT bootloader on x86
Wolfgang Denk
- [U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
Wolfgang Denk
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Wolfgang Denk
- [U-Boot] Compiling U-BOOT bootloader on x86
Wolfgang Denk
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Wolfgang Denk
- [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
Wolfgang Denk
- [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
Wolfgang Denk
- [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA
Wolfgang Denk
- [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA
Wolfgang Denk
- [U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards
Wolfgang Denk
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Wolfgang Denk
- [U-Boot] Your message to U-Boot awaits moderator approval
Wolfgang Denk
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] Your message to U-Boot awaits moderator approval
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Wolfgang Denk
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Wolfgang Denk
- [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32
Wolfgang Denk
- [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)
Wolfgang Denk
- [U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220
Wolfgang Denk
- [U-Boot] [PATCH 1/2] doc/README.scrapyard: add missing commit IDs
Wolfgang Denk
- [U-Boot] [PATCH 2/2] Power: remove support for Freescale MPC8220
Wolfgang Denk
- [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function
Wolfgang Denk
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Wolfgang Denk
- [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files
Wolfgang Denk
- [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.
Wolfgang Denk
- [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.
Wolfgang Denk
- [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
Wolfgang Denk
- [U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast
Wolfgang Denk
- [U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC
Wolfgang Denk
- [U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short.
Wolfgang Denk
- [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
Wolfgang Denk
- [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
Wolfgang Denk
- [U-Boot] Your message to U-Boot awaits moderator approval
Wolfgang Denk
- [U-Boot] [PATCH] mmc and fat bug fixes
Wolfgang Denk
- [U-Boot] ARM v7: Flush icache when executing a program with go
Wolfgang Denk
- [U-Boot] ARM v7: Flush icache when executing a program with go
Wolfgang Denk
- [U-Boot] disassembler ?
Wolfgang Denk
- [U-Boot] ARM v7: Flush icache when executing a program with go
Wolfgang Denk
- [U-Boot] load file to memory in standalone program
Wolfgang Denk
- [U-Boot] load file to memory in standalone program
Wolfgang Denk
- [U-Boot] ARM v7: Flush icache when executing a program with go
Wolfgang Denk
- [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache
Wolfgang Denk
- [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache
Wolfgang Denk
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Wolfgang Denk
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Wolfgang Denk
- [U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7
Wolfgang Denk
- [U-Boot] disassembler ?
Wolfgang Denk
- [U-Boot] [PATCH 2/2] wandboard: Disable data cache
Wolfgang Denk
- [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Wolfgang Denk
- [U-Boot] [PATCH 2/7] ahci: fix unaligned access
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Wolfgang Denk
- [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Wolfgang Denk
- [U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Wolfgang Denk
- [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching
Wolfgang Denk
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Wolfgang Denk
- [U-Boot] dfu: dfu and UBI Volumes
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] fopen/fwrite functions
Wolfgang Denk
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Wolfgang Denk
- [U-Boot] fopen/fwrite functions
Wolfgang Denk
- [U-Boot] In U-Boot-2013-01, __stringify is not working
Wolfgang Denk
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Wolfgang Denk
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Wolfgang Denk
- [U-Boot] TFTP timeouts, i.mx fec problem?
Wolfgang Denk
- [U-Boot] TFTP timeouts, i.mx fec problem?
Wolfgang Denk
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] TFTP timeouts, i.mx fec problem?
Wolfgang Denk
- [U-Boot] TFTP timeouts, i.mx fec problem?
Wolfgang Denk
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework
Marc Dietrich
- [U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency for mpic node
Wang Dongsheng-B40534
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Mike Dunn
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Dirk Eibach
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Dirk Eibach
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Dirk Eibach
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH v3] fs/ext4: Support device block sizes != 512 bytes
Egbert Eich
- [U-Boot] [PATCH 0/9] mx23: Make DDR initialization stable
Fabio Estevam
- [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter
Fabio Estevam
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Fabio Estevam
- [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH 5/9] mx23evk: Disable the internal pad keepers
Fabio Estevam
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Disable the internal pad keepers
Fabio Estevam
- [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations
Fabio Estevam
- [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Fabio Estevam
- [U-Boot] [PATCH 9/9] mxs: spl_mem_init: Change EMI port priority
Fabio Estevam
- [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter
Fabio Estevam
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Fabio Estevam
- [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations
Fabio Estevam
- [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations
Fabio Estevam
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Fabio Estevam
- [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v2 0/9] mx23: Make DDR initialization stable
Fabio Estevam
- [U-Boot] [PATCH v2 1/8] mx23: Fix pad voltage selection bit
Fabio Estevam
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Fabio Estevam
- [U-Boot] [PATCH v2 3/8] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v2 4/8] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v2 5/8] mxs: spl_mem_init: Fix comment about start bit
Fabio Estevam
- [U-Boot] [PATCH v2 6/8] mxs: spl_mem_init: Remove erroneous DDR setting
Fabio Estevam
- [U-Boot] [PATCH v2 7/8] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Fabio Estevam
- [U-Boot] [PATCH v2 8/8] mxs: spl_mem_init: Change EMI port priority
Fabio Estevam
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Fabio Estevam
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Fabio Estevam
- [U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable
Fabio Estevam
- [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit
Fabio Estevam
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v3 3/7] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v3 4/7] mxs: spl_mem_init: Fix comment about start bit
Fabio Estevam
- [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Fabio Estevam
- [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Fabio Estevam
- [U-Boot] [PATCH v3 7/7] mxs: spl_mem_init: Change EMI port priority
Fabio Estevam
- [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit
Fabio Estevam
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Fabio Estevam
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v4 0/7] mx23: Make DDR initialization stable
Fabio Estevam
- [U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit
Fabio Estevam
- [U-Boot] [PATCH v4 2/7] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v4 3/7] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v4 4/7] mxs: spl_mem_init: Fix comment about start bit
Fabio Estevam
- [U-Boot] [PATCH v4 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Fabio Estevam
- [U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Fabio Estevam
- [U-Boot] [PATCH v4 7/7] mxs: spl_mem_init: Change EMI port priority
Fabio Estevam
- [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable
Fabio Estevam
- [U-Boot] [PATCH v5 1/7] mx23: Fix pad voltage selection bit
Fabio Estevam
- [U-Boot] [PATCH v5 2/7] mx23evk: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v5 3/7] mx23_olinuxino: Fix DDR pin iomux settings
Fabio Estevam
- [U-Boot] [PATCH v5 4/7] mxs: spl_mem_init: Fix comment about start bit
Fabio Estevam
- [U-Boot] [PATCH v5 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Fabio Estevam
- [U-Boot] [PATCH v5 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Fabio Estevam
- [U-Boot] [PATCH v5 7/7] mxs: spl_mem_init: Change EMI port priority
Fabio Estevam
- [U-Boot] [PATCH] mx23: Add a README file
Fabio Estevam
- [U-Boot] [PATCH 1/6] README: mx28_common: Keep the text within 80 columns
Fabio Estevam
- [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
Fabio Estevam
- [U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence
Fabio Estevam
- [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs
Fabio Estevam
- [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory
Fabio Estevam
- [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory
Fabio Estevam
- [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory
Fabio Estevam
- [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads
Fabio Estevam
- [U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Fabio Estevam
- [U-Boot] u-boot UBI support
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx28evk: Add splash screen support
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Add splash screen support
Fabio Estevam
- [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
Fabio Estevam
- [U-Boot] mx23-olinuxino: occasional memory errors
Fabio Estevam
- [U-Boot] mx23-olinuxino: occasional memory errors
Fabio Estevam
- [U-Boot] mx23-olinuxino: occasional memory errors
Fabio Estevam
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Fabio Estevam
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Fabio Estevam
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 2/9] mx53loco: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 3/9] mx51evk: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 4/9] mx53ard: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 5/9] mx53evk: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 6/9] mx53smd: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 7/9] mx6qarm2: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 8/9] mx6qsabrelite: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 9/9] mx6qsabresd: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Fabio Estevam
- [U-Boot] [PATCH 1/2] wandboard: Enable HDMI splashscreen
Fabio Estevam
- [U-Boot] [PATCH 2/2] wandboard: Disable data cache
Fabio Estevam
- [U-Boot] [PATCH 2/2] wandboard: Disable data cache
Fabio Estevam
- [U-Boot] [PATCH 2/2] wandboard: Disable data cache
Fabio Estevam
- [U-Boot] [PATCH] mx6slevk: Allow booting a device tree kernel
Fabio Estevam
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Fabio Estevam
- [U-Boot] minimum bdi config to read flash on 85xx
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fabio Estevam
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Fabio Estevam
- [U-Boot] TFTP timeouts, i.mx fec problem?
Fabio Estevam
- [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL
Joel A Fernandes
- [U-Boot] [PATCH 2/2] am33xx: Board: Make CPSW section of ethernet initialization depend on CPSW driver
Joel A Fernandes
- [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL
Joel A Fernandes
- [U-Boot] [PATCH v2] SPL: Makefile: Build a separate autoconf.mk for SPL
Joel A Fernandes
- [U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Igor Ferrara
- [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue
Andy Fleming
- [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx
Andy Fleming
- [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode
Andy Fleming
- [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Andy Fleming
- [U-Boot] [PATCH v0] davinci, mmc: Added a delay reading ext CSD register
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] [Patch v2, batch 1 09/10] powerpc/corenet_ds: Move SRIO enablement into specific boards
Andy Fleming
- [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation
Andy Fleming
- [U-Boot] [Patch v2, batch 2 15/23] T4/USB: Add USB 2.0 UTMI dual phy support
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [v2] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC
Andy Fleming
- [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count
Andy Fleming
- [U-Boot] [v2] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support
Andy Fleming
- [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support
Andy Fleming
- [U-Boot] [Patch v2, batch 3 08/17] powerpc/85xx: fix build error introduced by serdes_get_prtcl
Andy Fleming
- [U-Boot] [v3] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [PATCH] mmc and fat bug fixes
Andy Fleming
- [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error
Andy Fleming
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] [PATCH] mmc and fat bug fixes
Andy Fleming
- [U-Boot] [PATCH 1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support
Andy Fleming
- [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format
Andy Fleming
- [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] u-boot without phy
Avner Flesch
- [U-Boot] Uboot question from Newbee
Casper Floppy
- [U-Boot] 2013 Plumber's CFP: Fastboot
Jeremiah Foster
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Jeremiah Foster
- [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
Renato Frias
- [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset
Renato Frias
- [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.
Mike Frysinger
- [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.
Mike Frysinger
- [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses
Gabbasov, Andrew
- [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Gabbasov, Andrew
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Gabbasov, Andrew
- [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure
Andrew Gabbasov
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Gabbasov, Andrew
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Andrew Gabbasov
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Gabbasov, Andrew
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Gabbasov, Andrew
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
Andrew Gabbasov
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select
Gabbasov, Andrew
- [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Liu Gang
- [U-Boot] [PATCH 1/6 v2] powerpc/doc: Update the README.srio-pcie-boot-corenet
Liu Gang
- [U-Boot] [PATCH 2/6 v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Liu Gang
- [U-Boot] [PATCH 3/6 v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE
Liu Gang
- [U-Boot] [PATCH 4/6 v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE
Liu Gang
- [U-Boot] [PATCH 5/6 v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE
Liu Gang
- [U-Boot] [PATCH 6/6 v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE
Liu Gang
- [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Liu Gang
- [U-Boot] [PATCH 1/2] usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSize
Vivek Gautam
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Vivek Gautam
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Vivek Gautam
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
Simon Glass
- [U-Boot] [PATCH 2/2] buildman: Produce a sensible error message when branch is missing
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [RFC PATCH] patman: Do not hardcode python path
Simon Glass
- [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox
Simon Glass
- [U-Boot] [PATCH v4 01/19] env: Fix minor comment typos in cmd_nvedit
Simon Glass
- [U-Boot] [PATCH v4 02/19] Add minor updates to README.fdt-control
Simon Glass
- [U-Boot] [PATCH v4 03/19] hash: Add a way to calculate a hash for any algortihm
Simon Glass
- [U-Boot] [PATCH v4 04/19] bootstage: Don't build for HOSTCC
Simon Glass
- [U-Boot] [PATCH v4 05/19] mkimage: Move ARRAY_SIZE to header file
Simon Glass
- [U-Boot] [PATCH v4 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
Simon Glass
- [U-Boot] [PATCH v4 07/19] image: Move timestamp #ifdefs to header file
Simon Glass
- [U-Boot] [PATCH v4 08/19] image: Export fit_check_ramdisk()
Simon Glass
- [U-Boot] [PATCH v4 09/19] image: Split FIT code into new image-fit.c
Simon Glass
- [U-Boot] [PATCH v4 10/19] image: Move HOSTCC image code to tools/
Simon Glass
- [U-Boot] [PATCH v4 11/19] image: Split hash node processing into its own function
Simon Glass
- [U-Boot] [PATCH v4 12/19] image: Convert fit_image_hash_set_value() to static, and rename
Simon Glass
- [U-Boot] [PATCH v4 13/19] image: Rename fit_image_check_hashes() to fit_image_verify()
Simon Glass
- [U-Boot] [PATCH v4 14/19] image: Move hash checking into its own function
Simon Glass
- [U-Boot] [PATCH v4 15/19] image: Move error! string to common place
Simon Glass
- [U-Boot] [PATCH v4 16/19] image: Export fit_conf_get_prop_node()
Simon Glass
- [U-Boot] [PATCH v4 17/19] image: Rename fit_add_hashes() to fit_add_verification_data()
Simon Glass
- [U-Boot] [PATCH v4 18/19] image: Rename hash printing to fit_image_print_verification_data()
Simon Glass
- [U-Boot] [PATCH v4 19/19] sandbox: image: Add support for booting images in sandbox
Simon Glass
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework
Simon Glass
- [U-Boot] [PATCH 1/5] Export fdt_stringlist_contains()
Simon Glass
- [U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
Simon Glass
- [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [RFC PATCH v2 01/14] sandbox: Make map_to_sysmem() use a constant pointer
Simon Glass
- [U-Boot] [RFC PATCH v2 02/14] sandbox: Correct data sizes and printf() strings in fdtdec.c
Simon Glass
- [U-Boot] [RFC PATCH v2 03/14] sandbox: config: Don't use 64-bit physical memory
Simon Glass
- [U-Boot] [RFC PATCH v2 04/14] Add cmd_process_error() to report and process errors
Simon Glass
- [U-Boot] [RFC PATCH v2 05/14] sandbox: config: Enable driver model
Simon Glass
- [U-Boot] [RFC PATCH v2 06/14] dm: Add base driver model support
Simon Glass
- [U-Boot] [RFC PATCH v2 07/14] dm: Set up driver model after relocation
Simon Glass
- [U-Boot] [RFC PATCH v2 08/14] dm: Add basic tests
Simon Glass
- [U-Boot] [RFC PATCH v2 09/14] dm: Add a 'dm' command for testing
Simon Glass
- [U-Boot] [RFC PATCH v2 10/14] dm: Add a demonstration/example driver
Simon Glass
- [U-Boot] [RFC PATCH v2 11/14] dm: Add GPIO support and tests
Simon Glass
- [U-Boot] [RFC PATCH v2 12/14] sandbox: Convert GPIOs to use driver model
Simon Glass
- [U-Boot] [RFC PATCH v2 13/14] dm: Enable gpio command to support driver model
Simon Glass
- [U-Boot] [RFC PATCH v2 14/14] dm: Add README for driver model
Simon Glass
- [U-Boot] [PATCH v3 01/12] mkimage: Put FIT loading in function and tidy error handling
Simon Glass
- [U-Boot] [PATCH v3 02/12] image: Remove remaining #ifdefs in image-fit.c
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL
Simon Glass
- [U-Boot] [PATCH v3 04/12] image: Split libfdt code into image-fdt.c
Simon Glass
- [U-Boot] [PATCH v3 05/12] image: Add device tree setup to image library
Simon Glass
- [U-Boot] [PATCH v3 06/12] arm: Refactor bootm to reduce #ifdefs
Simon Glass
- [U-Boot] [PATCH v3 07/12] arm: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [PATCH v3 08/12] powerpc: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [PATCH v3 09/12] m68k: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [PATCH v3 10/12] sparc: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [PATCH v3 11/12] buildman: Allow conflicting tags to avoid spurious errors
Simon Glass
- [U-Boot] [PATCH v3 12/12] buildman: Produce a sensible error message when branch is missing
Simon Glass
- [U-Boot] [PATCH] EXYNOS: SPI: Support word transfers
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
Simon Glass
- [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree
Simon Glass
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Simon Glass
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox
Simon Glass
- [U-Boot] [PATCH 1/3] usb: properly re-initialize the USB keyboard.
Simon Glass
- [U-Boot] [PATCH 2/3] usb: workaround non-working keyboards.
Simon Glass
- [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
Simon Glass
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Simon Glass
- [U-Boot] [PATCH] exynos: Enable mmc for snow
Simon Glass
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH 1/2] SPI: Add support for preamble bytes
Simon Glass
- [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH 1/2] EXYNOS: Export timer_get_us() to get microsecond timer
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support a delay after deactivate
Simon Glass
- [U-Boot] [PATCH] EXYNOS: SPI: Minimise access to SPI FIFO level
Simon Glass
- [U-Boot] [PATCH] EXYNOS: SPL: Add a custom spi copy function
Simon Glass
- [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function
Simon Glass
- [U-Boot] [PATCH v2] EXYNOS: SPL: Add a custom spi copy function
Simon Glass
- [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
Simon Glass
- [U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial
Simon Glass
- [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console
Simon Glass
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Simon Glass
- [U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c
Simon Glass
- [U-Boot] [PATCH 1/4] EXYNOS: Add API for power reset and exit wakeup
Simon Glass
- [U-Boot] [PATCH 2/4] EXYNOS: LDS file move to common
Simon Glass
- [U-Boot] [PATCH 3/4] EXYNOS4210: Configure GPIO for uart
Simon Glass
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Simon Glass
- [U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions
Simon Glass
- [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Simon Glass
- [U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686
Simon Glass
- [U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5
Simon Glass
- [U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling
Simon Glass
- [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
Simon Glass
- [U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v
Simon Glass
- [U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C
Simon Glass
- [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus
Simon Glass
- [U-Boot] [PATCH] usb: asix: Move software resets to basic_init
Simon Glass
- [U-Boot] [PATCH v5 5/7] Add Atmel I2C tpm
Simon Glass
- [U-Boot] [PATCH v5 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Simon Glass
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Simon Glass
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Simon Glass
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Simon Glass
- [U-Boot] [RFC PATCH 0/7] RFC: Add Kbuild system to U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 1/7] Add some required Kconfig files
Simon Glass
- [U-Boot] [RFC PATCH 2/7] arm: Allow start.o to come from any directory
Simon Glass
- [U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently
Simon Glass
- [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
Simon Glass
- [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 6/7] Enable Kconfig for U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 7/7] Switch over to Kbuild
Simon Glass
- [U-Boot] [RFC PATCH] patman: Do not hardcode python path
Simon Glass
- [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
Simon Glass
- [U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5
Simon Glass
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Simon Glass
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot
Simon Glass
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Simon Glass
- [U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree
Simon Glass
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] Samsung patches pending
Simon Glass
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Simon Glass
- [U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686
Simon Glass
- [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree
Simon Glass
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Simon Glass
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
Simon Glass
- [U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp
Simon Glass
- [U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions
Simon Glass
- [U-Boot] [PATCH v4 4/9] main: Move boot_delay code into its own function
Simon Glass
- [U-Boot] [PATCH v4 5/9] main: Use get/setenv_ulong()
Simon Glass
- [U-Boot] [PATCH v4 6/9] main: Fix typos and checkpatch warnings in command line reading
Simon Glass
- [U-Boot] [PATCH v4 7/9] main: Correct header order
Simon Glass
- [U-Boot] [PATCH v4 8/9] main: Add debug_parser() to avoid #ifdefs
Simon Glass
- [U-Boot] [PATCH v4 9/9] main: Add debug_bootkeys to avoid #ifdefs
Simon Glass
- [U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86
Simon Glass
- [U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox
Simon Glass
- [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store
Simon Glass
- [U-Boot] [PATCH v5 1/7] cros: add cros_ec driver
Simon Glass
- [U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec
Simon Glass
- [U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec
Simon Glass
- [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec
Simon Glass
- [U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver
Simon Glass
- [U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts
Simon Glass
- [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250
Simon Glass
- [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec
Simon Glass
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Simon Glass
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor
Simon Glass
- [U-Boot] [PATCH v3 01/10] bootstage: Introduce sub-IDs for use with image loading
Simon Glass
- [U-Boot] [PATCH v3 02/10] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building
Simon Glass
- [U-Boot] [PATCH v3 03/10] image: Introduce fit_image_load() to load images from FITs
Simon Glass
- [U-Boot] [PATCH v3 04/10] image: Use fit_image_load() to load ramdisk
Simon Glass
- [U-Boot] [PATCH v3 05/10] image: Use fit_image_load() to load FDT
Simon Glass
- [U-Boot] [PATCH v3 06/10] sandbox: Adjust bootm command to work with sandbox
Simon Glass
- [U-Boot] [PATCH v3 07/10] image: Use fit_image_load() to load kernel
Simon Glass
- [U-Boot] [PATCH v3 08/10] sandbox: image: Adjust FIT image printing to work with sandbox
Simon Glass
- [U-Boot] [PATCH v3 09/10] bootstage: Remove unused entries related to kernel/ramdisk/fdt load
Simon Glass
- [U-Boot] [PATCH v3 10/10] sandbox: image: Create a test for loading FIT images
Simon Glass
- [U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor
Simon Glass
- [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Simon Glass
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Simon Glass
- [U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4
Simon Glass
- [U-Boot] [PATCH] buildman: Allow make flags to be specified for each board
Simon Glass
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Simon Glass
- [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()
Simon Glass
- [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
Simon Glass
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Simon Glass
- [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
Simon Glass
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Simon Glass
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Simon Glass
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Simon Glass
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Simon Glass
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Simon Glass
- [U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode
Simon Glass
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Simon Glass
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Simon Glass
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Simon Glass
- [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes
Simon Glass
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Simon Glass
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Simon Glass
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Jonas Gorski
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Jonas Gorski
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Jonas Gorski
- [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)
Alexander Graf
- [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)
Alexander Graf
- [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)
Alexander Graf
- [U-Boot] CAN framework in U-Boot
Wolfgang Grandegger
- [U-Boot] CAN framework in U-Boot
Wolfgang Grandegger
- [U-Boot] ulpi patch in uboot
Igor Grinberg
- [U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus.
Igor Grinberg
- [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.
Igor Grinberg
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Shawn Guo
- [U-Boot] cfb_console and dcache on i.MX6
Anatolij Gustschin
- [U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions
Anatolij Gustschin
- [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver
Anatolij Gustschin
- [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK
Anatolij Gustschin
- [U-Boot] [PATCH] Generalize "cls" command
Anatolij Gustschin
- [U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support
Anatolij Gustschin
- [U-Boot] Displaying characters on the display in u-boot
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] wandboard: Disable data cache
Anatolij Gustschin
- [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode
Zhang Haijun-B42677
- [U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode
Haijun.Zhang
- [U-Boot] [PATCH V2] powerpc/esdhc: Correct judgement for DATA PIO mode
Haijun.Zhang
- [U-Boot] [u-boot-mips] gp init and -pie option
Jason Harris
- [U-Boot] [u-boot-mips] gp init and -pie option
Jason Harris
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Michael Heimpold
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Michael Heimpold
- [U-Boot] Your message to U-Boot awaits moderator approval
Michael Heimpold
- [U-Boot] [SOLVED] Re: Your message to U-Boot awaits moderator approval
Michael Heimpold
- [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error
Michael Heimpold
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Michael Heimpold
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Michael Heimpold
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Michael Heimpold
- [U-Boot] u-boot UBI support
Paul B. Henson
- [PATCH] Update doc/README.ubi to add description of accessing ubi filesystems.
Paul B. Henson
- [PATCH] Update doc/README.ubi to add description of accessing ubi filesystems.
Paul B. Henson
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Rob Herring
- [U-Boot] [PATCH 00/10] PXE support updates
Rob Herring
- [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation
Rob Herring
- [U-Boot] [PATCH 02/10] net: calxedaxgmac: enable rx cut-thru
Rob Herring
- [U-Boot] [PATCH 03/10] ARM: highbank: update config options
Rob Herring
- [U-Boot] [PATCH 04/10] ARM: highbank: fix get_tbclk value to timer rate
Rob Herring
- [U-Boot] [PATCH 05/10] ARM: highbank: set timer prescaler to 256
Rob Herring
- [U-Boot] [PATCH 06/10] ARM: highbank: avoid bss write in timer_init
Rob Herring
- [U-Boot] [PATCH 07/10] ARM: highbank: enable reset on command timeout
Rob Herring
- [U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status
Rob Herring
- [U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off
Rob Herring
- [U-Boot] [PATCH 10/10] highbank: enable keyed autoboot stop
Rob Herring
- [U-Boot] [PATCH 01/10] ARM: move interrupt_init to before relocation
Rob Herring
- [U-Boot] [PATCH v2] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
Rob Herring
- [U-Boot] [PATCH v2] ARM: highbank: setup peripherals based on power domain status
Rob Herring
- [U-Boot] [PATCH v2] ARM: highbank: update config options
Rob Herring
- [U-Boot] [PATCH v2] ARM: move interrupt_init to before relocation
Rob Herring
- [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports
Rob Herring
- [U-Boot] [PATCH 2/7] ahci: fix unaligned access
Rob Herring
- [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry
Rob Herring
- [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function
Rob Herring
- [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up
Rob Herring
- [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec
Rob Herring
- [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions
Rob Herring
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Joe Hershberger
- [U-Boot] [PATCH] usb: asix: Move software resets to basic_init
Joe Hershberger
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Joe Hershberger
- [U-Boot] [PATCH 00/10] PXE support updates
Joe Hershberger
- [U-Boot] [PATCH v4 2/9] net: Add prototype for update_tftp
Joe Hershberger
- [U-Boot] [PATCH v4 3/9] main: Separate out the two abortboot() functions
Joe Hershberger
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Joe Hershberger
- [U-Boot] [PATCH] Fix device detection for API consumers
Jeroen Hofstee
- [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Jeroen Hofstee
- [U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count
Mingkai Hu
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Wang Huan-B18965
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Wang Huan-B18965
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Wang Huan-B18965
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Wang Huan-B18965
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Wang Huan-B18965
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Wang Huan-B18965
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Wang Huan-B18965
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Wang Huan-B18965
- [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board
Wang Huan-B18965
- [U-Boot] Can not get linux prompt using sandbox
Christian Hyep
- [U-Boot] Limitations/Considerations when programming U-Boot
Romain Izard
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Mark Jackson
- [U-Boot] ARM v7: Flush icache when executing a program with go
Kees Jongenburger
- [U-Boot] [PATCH v3 00/10] MIPS: initial support for emulated Malta board
Gabor Juhos
- [U-Boot] [PATCH v3 01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board
Gabor Juhos
- [U-Boot] [PATCH v3 02/10] MIPS: qemu-malta: add reset support
Gabor Juhos
- [U-Boot] [PATCH v3 03/10] MIPS: qemu-malta: enable flash support
Gabor Juhos
- [U-Boot] [PATCH v3 04/10] MIPS: import gt64120.h header from Linux
Gabor Juhos
- [U-Boot] [PATCH v3 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON
Gabor Juhos
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [PATCH v3 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses
Gabor Juhos
- [U-Boot] [PATCH v3 08/10] MIPS: qemu-malta: bring up ethernet
Gabor Juhos
- [U-Boot] [PATCH v3 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code
Gabor Juhos
- [U-Boot] [PATCH v3 10/10] MIPS: start.S: emulate REVISION register for qemu-malta
Gabor Juhos
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [PATCH 0/6] nds32: fix build errors/warnings
Gabor Juhos
- [U-Boot] [PATCH 1/6] nds32: introduce macros for bit manipulation
Gabor Juhos
- [U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined
Gabor Juhos
- [U-Boot] [PATCH 3/6] block: constify sect_buf argument of ide_write_data
Gabor Juhos
- [U-Boot] [PATCH 4/6] pci: add prototype for pci_ftpci_init() function
Gabor Juhos
- [U-Boot] [PATCH 5/6] pci: move pci_ftpci100.h to include/faraday/ftpci100.h
Gabor Juhos
- [U-Boot] [PATCH 6/6] nds32: adp-ag102: use 'faraday/ftpci100.h' for pci_ftpci_init
Gabor Juhos
- [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
Gabor Juhos
- [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
Gabor Juhos
- [U-Boot] [PATCH v2] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
Gabor Juhos
- [U-Boot] U-Boot configuration on LM3S8962 problem
Xaut Jzd
- [U-Boot] Displaying characters on the display in u-boot
Bhargav A K
- [U-Boot] uboot for cavium octeon 2 MIPS SOC
Edward K
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
- [U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B
Minkyu Kang
- [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Minkyu Kang
- [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2
Minkyu Kang
- [U-Boot] [PATCH] Exynos5: clock: Update the equation to calculate PLL output frequency
Minkyu Kang
- [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo
Minkyu Kang
- [U-Boot] [PATCH v2] EXYNOS: SPI: Support SPI_PREAMBLE mode
Minkyu Kang
- [U-Boot] [PATCH 0/3] Add Arndale board support
Minkyu Kang
- [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Nikita Kiryanov
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Troy Kisky
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Troy Kisky
- [U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
Troy Kisky
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Troy Kisky
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Troy Kisky
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Troy Kisky
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Update pre and post divider algorithm
Troy Kisky
- [U-Boot] TFTP timeouts, i.mx fec problem?
Troy Kisky
- [U-Boot] [PATCH] tools: default image: use ih_size for checking data size
Peter Korsgaard
- [U-Boot] [PATCHv2 0/6] Falcon boot mode for spl_mmc
Peter Korsgaard
- [U-Boot] [PATCHv2 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging
Peter Korsgaard
- [U-Boot] [PATCHv2 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out
Peter Korsgaard
- [U-Boot] [PATCHv2 3/6] spl_mmc: add Falcon mode support for FAT variant
Peter Korsgaard
- [U-Boot] [PATCHv2 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument
Peter Korsgaard
- [U-Boot] [PATCHv2 5/6] spl_mmc: add Falcon mode support for raw variant
Peter Korsgaard
- [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand
Peter Korsgaard
- [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand
Peter Korsgaard
- [U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
Peter Korsgaard
- [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
Peter Korsgaard
- [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash
Peter Korsgaard
- [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape
Peter Korsgaard
- [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.
Peter Korsgaard
- [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.
Peter Korsgaard
- [U-Boot] [PATCHv3 0/6] Falcon boot mode for spl_mmc
Peter Korsgaard
- [U-Boot] [PATCHv3 1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging
Peter Korsgaard
- [U-Boot] [PATCHv3 2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out
Peter Korsgaard
- [U-Boot] [PATCHv3 3/6] spl_mmc: add Falcon mode support for FAT variant
Peter Korsgaard
- [U-Boot] [PATCHv3 4/6] spl_mmc: mmc_load_image_raw(): Add sector argument
Peter Korsgaard
- [U-Boot] [PATCHv3 5/6] spl_mmc: add Falcon mode support for raw variant
Peter Korsgaard
- [U-Boot] [PATCHv3 6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand
Peter Korsgaard
- [U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly
Peter Korsgaard
- [U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info
Peter Korsgaard
- [U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
Peter Korsgaard
- [U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks
Peter Korsgaard
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Peter Korsgaard
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Peter Korsgaard
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Peter Korsgaard
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Peter Korsgaard
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Peter Korsgaard
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Peter Korsgaard
- [U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC
Peter Korsgaard
- [U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET
Peter Korsgaard
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Peter Korsgaard
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Peter Korsgaard
- [U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END
Peter Korsgaard
- [U-Boot] [PATCH 0/2] Loader script updates for OpenRISC
Stefan Kristiansson
- [U-Boot] [PATCH 1/2] openrisc: specify a memory region for u_boot_lists
Stefan Kristiansson
- [U-Boot] [PATCH 2/2] openrisc: move board linker script(s) to a common in cpu/
Stefan Kristiansson
- [U-Boot] [PATCH] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/b4860qds: Relax NOR flash teadc timing parameter
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
Prabhakar Kushwaha
- [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
Mats Kärrman
- [U-Boot] [PATCH] video: exynos: Change mipi dsi write function parameters correctly
Donghwa Lee
- [U-Boot] [PATCH] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data()
Donghwa Lee
- [U-Boot] [PATCH 0/2] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.
SARTRE Leo
- [U-Boot] [PATCH 2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card.
SARTRE Leo
- [U-Boot] [PATCH] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module.
SARTRE Leo
- [U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Axel Lin
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Axel Lin
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Axel Lin
- [U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
Axel Lin
- [U-Boot] [PATCH v2 1/2] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Axel Lin
- [U-Boot] [PATCH v2 2/2] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
Axel Lin
- [U-Boot] [PATCH] powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE
Axel Lin
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
Jim Lin
- [U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed
Jim Lin
- [U-Boot] [PATCH] nds32: Use sections header to obtain link symbols
Macpaul Lin
- [U-Boot] Pull request: u-boot-nds32
Macpaul Lin
- [U-Boot] [PATCH] powerpc/c29xpcie: add readme document for c29xpcie
Po Liu
- [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx
Valentin Longchamp
- [U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx
Valentin Longchamp
- [U-Boot] dfu: dfu and UBI Volumes
Lukasz Majewski
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Lucas De Marchi
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Allen Martin
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Allen Martin
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Allen Martin
- [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW
Allen Martin
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Peter Maydell
- [U-Boot] 2013 Plumber's CFP: Fastboot
Mehaffey, John
- [U-Boot] 2013 Plumber's CFP: Fastboot
Mehaffey, John
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Mehaffey, John
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Mehaffey, John
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Nishanth Menon
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain
Nishanth Menon
- [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
Nishanth Menon
- [U-Boot] [PATCH 03/21] fsl_ifc: add support for different IFC bank count
Hu Mingkai-B21284
- [U-Boot] Your message to U-Boot awaits moderator approval
Hu Mingkai-B21284
- [U-Boot] [PATCH v2] fsl_ifc: add support for different IFC bank count
Hu Mingkai-B21284
- [U-Boot] minimum bdi config to read flash on 85xx
Monica
- [U-Boot] minimum bdi config to read flash on 85xx
Monica
- [U-Boot] U-Boot code git versions problem
Balaji N
- [U-Boot] In U-Boot-2013-01, __stringify is not working
Balaji N
- [U-Boot] Unable to understand flow of U-Boot Code.
Vikram Narayanan
- [U-Boot] [PATCH] itest: Add bitwise and operator
Eric Nelson
- [U-Boot] [PATCH] itest: Add bitwise and operator
Eric Nelson
- [U-Boot] cfb_console and dcache on i.MX6
Eric Nelson
- [U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions
Eric Nelson
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] hush variable expansion & quoting
Henrik Nordström
- [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store
Henrik Nordström
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] [PATCH] sandbox: block driver using host file/device as backing store
Henrik Nordström
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Henrik Nordström
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Henrik Nordström
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] hush variable expansion & quoting
Henrik Nordström
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] Building two different "SPL" for the same board?
Henrik Nordström
- [U-Boot] Building two different "SPL" for the same board?
Henrik Nordström
- [U-Boot] sandbox: block driver using host file/device as backing store, crash in ext4
Henrik Nordström
- [U-Boot] load file to memory in standalone program
Henrik Nordström
- [U-Boot] ARM v7: Flush icache when executing a program with go
Henrik Nordström
- [U-Boot] Building two different "SPL" for the same board?
Henrik Nordström
- [U-Boot] Building two different "SPL" for the same board?
Henrik Nordström
- [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek:Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
Chris Packham
- [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
Chris Packham
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Kyungmin Park
- [U-Boot] Regarding tdm3730
Nagesh Pathak
- [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
Luka Perkov
- [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
Luka Perkov
- [U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
Luka Perkov
- [U-Boot] [PATCH] wandboard: fix typo in README
Luka Perkov
- [U-Boot] 2013 Plumber's CFP: Fastboot
Thomas Petazzoni
- [U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V
Kim Phillips
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] usb keyboard
Maxim Podbereznyy
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Lennart Poettering
- [U-Boot] [systemd-devel] 2013 Plumber's CFP: Fastboot
Lennart Poettering
- [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Enable access to auxclk registers
Lubomir Popov
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: uEVM: Fix pinmux for USB support
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
Lubomir Popov
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP4/5: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Fix bug in omap5_es1_prcm struct
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct
Lubomir Popov
- [U-Boot] U-Boot OMAP issues
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH V4] ARM: OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [PATCH 1/5] omap5: add qspi support
Matt Porter
- [PATCH 2/5] spi: add TI QSPI driver
Matt Porter
- [PATCH 3/5] dra7xx_evm: add SPL API, QSPI, and serial flash support
Matt Porter
- [U-Boot] [PATCH V9 7/9] MMC: APIs to support resize of EMMC boot partition
Michael Pratt
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution
Andre Przywara
- [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch
Andre Przywara
- [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Andre Przywara
- [U-Boot] [PATCH 6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15
Andre Przywara
- [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch
Andre Przywara
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution
Andre Przywara
- [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch
Andre Przywara
- [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Andre Przywara
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)
Sricharan R
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Sricharan R
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Sricharan R
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Sricharan R
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Sricharan R
- [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks
Sricharan R
- [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address
Sricharan R
- [U-Boot] [PATCH] mx27: add function enable_caches
Philippe Reynes
- [U-Boot] [PATCH] mx27: add i2c clock
Philippe Reynes
- [U-Boot] [PATCH] mx27: add missing constant for mx27
Philippe Reynes
- [U-Boot] u-boot UBI support
Tom Rini
- [U-Boot] Pull request - microblaze
Tom Rini
- [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c
Tom Rini
- [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support
Tom Rini
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Rini
- [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements
Tom Rini
- [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support
Tom Rini
- [U-Boot] [PATCH 1/2] mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND
Tom Rini
- [U-Boot] spl_mmc: cleanup variable types
Tom Rini
- [U-Boot] [PATCH v3 5/5] lib: consolidate hang()
Tom Rini
- [U-Boot] [PATCH v3 0/5] consolidate hang()
Tom Rini
- [U-Boot] [PATCH v2 0/11] Add Regular Expressions Support
Tom Rini
- [U-Boot] mmc: Define a constant for the maximum block size
Tom Rini
- [U-Boot] [U-Boot, v2] disk/part_dos: check harder for partition table
Tom Rini
- [U-Boot] [U-Boot, v2] disk/gpt: Fix GPT partition handling for blocksize != 512
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] disk/iso: Add Support for block sizes > 512 byte to ISO partition support
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] fs/fat: Don't multiply fatsize with sector size
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] part/dev_desc: Add log2 of blocksize to block_dev_desc data struct
Tom Rini
- [U-Boot] env_mmc: add support for redundant environment
Tom Rini
- [U-Boot] [PULL] : Please pull u-boot-mpc5xxx
Tom Rini
- [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support
Tom Rini
- [U-Boot] Regression from v2013.04-rc3 with sdcard detection
Tom Rini
- [U-Boot] [PATCH] P1022DS: Set CONFIG_SPL_MAX_SIZE directly
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support
Tom Rini
- [U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
Tom Rini
- [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
Tom Rini
- [U-Boot] u-boot UBI support
Tom Rini
- [U-Boot] [PULL] u-boot-pxa.git/master
Tom Rini
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Tom Rini
- [U-Boot] [RFC PATCH] patman: Do not hardcode python path
Tom Rini
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Tom Rini
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Please pull u-boot-mmc.git
Tom Rini
- [U-Boot] u-boot UBI support
Tom Rini
- [U-Boot] Pull request: u-boot-nds32
Tom Rini
- [U-Boot] [PATCH V2 4/5] ARM: OMAP: Cleanup boot parameters usage
Tom Rini
- [U-Boot] [PATCH V2 5/5] ARM: OMAP: Add arch_cpu_init function
Tom Rini
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Tom Rini
- [U-Boot] [PATCHv2 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat) and nand
Tom Rini
- [U-Boot] [PATCH 1/6] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
Tom Rini
- [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash
Tom Rini
- [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
Tom Rini
- [U-Boot] [PATCH 4/6] am335x_evm: Rework board_is_foo() checks
Tom Rini
- [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape
Tom Rini
- [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] Pull request - microblaze
Tom Rini
- [U-Boot] Pull request: u-boot-blackfin
Tom Rini
- [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions
Tom Rini
- [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Tom Rini
- [U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h
Tom Rini
- [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox
Tom Rini
- [U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)
Tom Rini
- [U-Boot] [PATCH 0/2] Loader script updates for OpenRISC
Tom Rini
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] build: Pull -DBUILD_TAG into separate ifdef
Tom Rini
- [U-Boot] [U-Boot, v2] env: throw an error when an empty key is used
Tom Rini
- [U-Boot] Fix references to the documentation files
Tom Rini
- [U-Boot] [U-Boot, v3] fs/ext4: Support device block sizes != 512 bytes
Tom Rini
- [U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC
Tom Rini
- [U-Boot] [v2] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] Pull request: u-boot-fdt
Tom Rini
- [U-Boot] Pull request: u-boot-blackfin
Tom Rini
- [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH 3/6] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
Tom Rini
- [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash
Tom Rini
- [U-Boot] [PATCH 5/6] am335x_evm:Add support for the NOR module on the memory cape
Tom Rini
- [U-Boot] [PATCH 6/6] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH 2/6] am335x_evm: Add MTDPARTS info for SPI flash
Tom Rini
- [U-Boot] [PATCH v2 1/7] am33xx/omap3: Clean up gpmc_init slightly
Tom Rini
- [U-Boot] [PATCH v2 2/7] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE
Tom Rini
- [U-Boot] [PATCH v2 3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info
Tom Rini
- [U-Boot] [PATCH v2 4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT
Tom Rini
- [U-Boot] [PATCH v2 5/7] am335x_evm: Rework board_is_foo() checks
Tom Rini
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Tom Rini
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Tom Rini
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] [PULL] please pull u-boot-avr32/master
Tom Rini
- [U-Boot] [PATCH 1/4] powerpc: Correct im_dprambase cast
Tom Rini
- [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
Tom Rini
- [U-Boot] [PATCH 3/4] ELPPC: Don't write magic numbers via short.
Tom Rini
- [U-Boot] [PATCH 4/4] mpc8323erdb: Update crc32 check of MAC
Tom Rini
- [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot
Tom Rini
- [U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command
Tom Rini
- [U-Boot] da850-evm: MMC-SD query
Tom Rini
- [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Tom Rini
- [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Tom Rini
- [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
Tom Rini
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] fatwrite problem
Tom Rini
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] Pull request v2: u-boot-blackfin
Tom Rini
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Tom Rini
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Tom Rini
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Tom Rini
- [U-Boot] [PATCH 0/2] Power: remove support for Freescale MPC8220
Tom Rini
- [U-Boot] [v3] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] OMAP5: Enable USB Ethernet support with LAN9730
Tom Rini
- [U-Boot] [PATCH v4 0/19] Allow images to work on sandbox
Tom Rini
- [U-Boot] [U-Boot, v3, 01/12] mkimage: Put FIT loading in function and tidy error handling
Tom Rini
- [U-Boot] u-boot UBI support
Tom Rini
- [U-Boot] smc911x: fix the timeout detection
Tom Rini
- [U-Boot] drivers/mmc: move spl_mmc.c to common/spl
Tom Rini
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Tom Rini
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] ARM v7: Flush icache when executing a program with go
Tom Rini
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Tom Rini
- [U-Boot] [PATCH] mmc and fat bug fixes
Tom Rini
- [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error
Tom Rini
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
Tom Rini
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Tom Rini
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
Tom Rini
- [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Tom Rini
- [U-Boot] ARM v7: Flush icache when executing a program with go
Tom Rini
- [U-Boot] Please pull u-boot-mmc.git
Tom Rini
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Tom Rini
- [U-Boot] [PATCH] README: Correct reference for CONFIG_SUPPORT_RAW_INITRD
Tom Rini
- [U-Boot] [PATCH 03/10] ARM: highbank: update config options
Tom Rini
- [U-Boot] [PATCH 08/10] ARM: highbank: setup peripherals based on power domain status
Tom Rini
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Tom Rini
- [U-Boot] [PATCH v2 6/7] am335x_evm: Add support for the NOR module on the memory cape
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [ANN] SPI Custodian
Tom Rini
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Tom Rini
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] Building two different "SPL" for the same board?
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL
Tom Rini
- [U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Makefile: Build a separate autoconf.mk for SPL
Tom Rini
- [U-Boot] [U-Boot, v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Tom Rini
- [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] .gitignore: add GNU GLOBAL files
Tom Rini
- [U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86
Tom Rini
- [U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox
Tom Rini
- [U-Boot] Building two different "SPL" for the same board?
Tom Rini
- [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET
Tom Rini
- [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET
Tom Rini
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Tom Rini
- [U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Tom Rini
- [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
Tom Rini
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Tom Rini
- [U-Boot] Building two different "SPL" for the same board?
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function
Tom Rini
- [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports
Tom Rini
- [U-Boot] [PATCH 2/7] ahci: fix unaligned access
Tom Rini
- [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry
Tom Rini
- [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up
Tom Rini
- [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec
Tom Rini
- [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions
Tom Rini
- [U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it
Tom Rini
- [U-Boot] [PATCH] cmd_mem: fix cp command
Tom Rini
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Tom Rini
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Tom Rini
- [U-Boot] [PATCH] da830: add MMC support
Tom Rini
- [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area
Tom Rini
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] [PATCH] da830: add MMC support
Tom Rini
- [U-Boot] [PATCH v3 0/2] cmd_sf: print message support
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
Tom Rini
- [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct
Tom Rini
- [U-Boot] [PATCH 0/5] sf: Code cleanup patch set
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] dfu: dfu and UBI Volumes
Tom Rini
- [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
Tom Rini
- [U-Boot] [RFC PATCH 3/7] Tidy up Makefiles to use COBJS consistently
Tom Rini
- [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks
Tom Rini
- [U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ
Tom Rini
- [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address
Tom Rini
- [U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Tom Rini
- [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Tom Rini
- [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address
Tom Rini
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Tom Rini
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Tom Rini
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Tom Rini
- [U-Boot] [PATCH v3 0/16] Provide a mechanism to avoid using #ifdef everywhere
Tom Rini
- [U-Boot] [PATCH v3] OMAP: I2C: New read, write and probe functions
Tom Rini
- [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
Tom Rini
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Tom Rini
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Tom Rini
- [U-Boot] [PATCH 1/3] omap-common/hwinit-common.c: Mark omap_rev_string as static
Tom Rini
- [U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END
Tom Rini
- [U-Boot] [PATCH 3/3] am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] Wrong RAM Size on Devkit8000
Maxime Ripard
- [U-Boot] Wrong RAM Size on Devkit8000
Maxime Ripard
- [U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Stefan Roese
- [U-Boot] Not able load u-boot from flash to ddr
Stefan Roese
- [U-Boot] Patch for RAMBOOT
Stefan Roese
- [U-Boot] [ANN] SPI Custodian
Stefan Roese
- [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program
Stefan Roese
- [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h
Stefan Roese
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Stefan Roese
- [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure
Stefan Roese
- [U-Boot] [PATCH v2] cfi_flash: Fix unaligned accesses to cfi_qry structure
Stefan Roese
- [U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator
Stefan Roese
- [U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] uboot mips cpu flash memory map 0x1F000000 or 0xBF000000
RdrouterUboot Router
- [U-Boot] [RFC PATCH] ARM: byteorder: add optimized swab16 and swab32
Måns Rullgård
- [U-Boot] CAN framework in U-Boot
Bhupesh SHARMA
- [U-Boot] CAN framework in U-Boot
Bhupesh SHARMA
- [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit
Otavio Salvador
- [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Otavio Salvador
- [U-Boot] [PATCH] mx23: Add a README file
Otavio Salvador
- [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
Otavio Salvador
- [U-Boot] [PATCH v2] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] [PATCH v3] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] mx23-olinuxino: occasional memory errors
Otavio Salvador
- [U-Boot] mx23-olinuxino: occasional memory errors
Otavio Salvador
- [U-Boot] mx23-olinuxino: occasional memory errors
Otavio Salvador
- [U-Boot] [PATCH v4] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] [PATCH v5] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board
Otavio Salvador
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Otavio Salvador
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Otavio Salvador
- [U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
Otavio Salvador
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Otavio Salvador
- [U-Boot] [PATCH 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Otavio Salvador
- [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] wandboard: Add Boot Splash image with Wandboard logo
Otavio Salvador
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Otavio Salvador
- [U-Boot] [PATCH 2/2] wandboard: Add Boot Splash image with Wandboard logo
Otavio Salvador
- [U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] wandboard: Add Boot Splash image with Wandboard logo
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards
Otavio Salvador
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Otavio Salvador
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Otavio Salvador
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Otavio Salvador
- [U-Boot] Exynos5: cpufreq: Implement frequency scaling for exynos5
Akshay Saraswat
- [U-Boot] [PATCH 0/4 v2] Exynos5: Add cpu freq and tmu throttling
Akshay Saraswat
- [U-Boot] [PATCH 1/4 v2] PMIC: max77686: add pmic_set_voltage api for max77686
Akshay Saraswat
- [U-Boot] [PATCH 2/4 v2] Exynos5: cpufreq: Implement frequency scaling for exynos5
Akshay Saraswat
- [U-Boot] [PATCH 3/4 v2] smdk5250: enable support for tmu throttling
Akshay Saraswat
- [U-Boot] [PATCH 4/4 v2] Exynos5: config: enable cpu freq
Akshay Saraswat
- [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)
An Schall
- [U-Boot] Reading uninitialized SDRAM values on OMAP4460 (PandaBoard)
André Schaller
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 1/9] i2c: add i2c_core and prepare for new multibus support
Heiko Schocher
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 3/9] i2c, soft-i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 4/9] i2c, fsl_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX
Heiko Schocher
- [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable
Heiko Schocher
- [U-Boot] [PATCH v3 7/9] tegra: i2c: Add function to know about current bus
Heiko Schocher
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX
Heiko Schocher
- [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable
Heiko Schocher
- [U-Boot] [PATCH] arm/km: fix u-boot update functionality
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
Heiko Schocher
- [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support
Heiko Schocher
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework
Heiko Schocher
- [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support
Heiko Schocher
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access
Heiko Schocher
- [U-Boot] [PATCH v4 00/10] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v4 01/10] i2c: add i2c_core and prepare for new multibus support
Heiko Schocher
- [U-Boot] [PATCH v4 02/10] i2c: common changes for multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v4 03/10] i2c, soft-i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v4 04/10] i2c, fsl_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v4 05/10] i2c, multibus: get rid of CONFIG_I2C_MUX
Heiko Schocher
- [U-Boot] [PATCH v4 06/10] i2c, multibus, keymile: get rid of EEprom_ivm envvariable
Heiko Schocher
- [U-Boot] [PATCH v4 07/10] tegra: i2c: Add function to know about current bus
Heiko Schocher
- [U-Boot] [PATCH v4 08/10] tegra: i2c: Enable new CONFIG_SYS_I2C framework
Heiko Schocher
- [U-Boot] [PATCH v4 09/10] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] i2c loop command
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] dfu: dfu and UBI Volumes
Heiko Schocher
- [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
Daniel Schwierzeck
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Daniel Schwierzeck
- [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
Daniel Schwierzeck
- [U-Boot] [PATCH] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
Daniel Schwierzeck
- [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
Matt Sealey
- [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
Matt Sealey
- [U-Boot] why patch work cannot catch my patch
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
Xie Shaohui-B21989
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Bo Shen
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Bo Shen
- [U-Boot] usb keyboard
Bo Shen
- [U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux
Bo Shen
- [U-Boot] Loading Linux Image on AT91SAM9263-EK
Bo Shen
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Bo Shen
- [U-Boot] [PATCH v3] at91sam9x5ek: Pass serial and revision tags to Linux
Bo Shen
- [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error
Bo Shen
- [U-Boot] [Patch v2 4/4] ARM: atmel: add sama5d3xek support
Bo Shen
- [U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices
Bo Shen
- [U-Boot] [PATCH 0/3] ARM: atmel: add sama5d3xek board support
Bo Shen
- [U-Boot] [PATCH 1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register
Bo Shen
- [U-Boot] [PATCH 2/3] USB: ohci-at91: support sama5d3x devices
Bo Shen
- [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d3xek support
Bo Shen
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Bo Shen
- [U-Boot] [PATCH 0/3] ARM: at91: fix and update README.at91 file
Bo Shen
- [U-Boot] [PATCH 1/3] ARM: at91: fix and update README.at91 document
Bo Shen
- [U-Boot] [PATCH 2/3] ARM: at91: add at91sam9x5 and sama5d3x information
Bo Shen
- [U-Boot] [PATCH 3/3] ARM: at91: add NAND partition table and index
Bo Shen
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Bo Shen
- [U-Boot] [PATCH] mmc: fix env in mmc with redundant compile error
Bo Shen
- [U-Boot] [PATCH v2] mmc: fix env in mmc with redundant compile error
Bo Shen
- [U-Boot] u-boot USB question
Bo Shen
- [U-Boot] u-boot USB question
Bo Shen
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Bo Shen
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Bo Shen
- [U-Boot] Conflict resolution for u-boot-arm/master and u-boot/master merge
Bo Shen
- [U-Boot] [PATCH 0/4 V5] SMDK5250: FDT: Add device tree support for console
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4 V5] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V5] EXYNOS5: FDT: Add serial device node values
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4 V5] S5P: Serial: Add fdt support to driver
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4 V5] CONFIG: EXYNOS5: Enable silent console
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V2] EXYNOS: Support a delay after deactivate for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V2] EXYNOS: Export timer_get_us() to get microsecond timer
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V2] EXYNOS: SPI: Support a delay after deactivate
Rajeshwari Shinde
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Rajeshwari Shinde
- [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V3] SPI: Enable SPI_PREAMBLE Mode
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V3] SPI: Add support for preamble bytes
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V3] EXYNOS: SPI: Support SPI_PREAMBLE mode
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V4] SPI: Add support for preamble bytes
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V4] EXYNOS: SPI: Support SPI_PREAMBLE mode
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V5] spi: Enable SPI_PREAMBLE Mode
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V5] spi: exynos: Support SPI_PREAMBLE mode
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V3] exynos: Support a delay after deactivate for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V3] exynos: Export timer_get_us() to get microsecond timer
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate
Rajeshwari Shinde
- [U-Boot] [PATCH V2] spi: exynos: Minimise access to SPI FIFO level
Rajeshwari Shinde
- [U-Boot] [PATCH V2] spi: exynos: Support word transfers
Rajeshwari Shinde
- [U-Boot] [PATCH V2] exynos: spl: Add a custom spi copy function
Rajeshwari Shinde
- [U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox
Sascha Silbe
- [U-Boot] [PATCH v4 00/10] Add Marvell Dove and SolidRun CuBox support
Sascha Silbe
- [U-Boot] [PATCH v4 01/10] ARM: dove: add support for Marvell Dove SoC
Sascha Silbe
- [U-Boot] [PATCH v4 02/10] usb: ehci-marvell: add support for second USB controller
Sascha Silbe
- [U-Boot] [PATCH v4 03/10] GPIO: add gpio driver for Dove SoCs
Sascha Silbe
- [U-Boot] [PATCH v4 04/10] MMC: sdhci: Add support for dove sdhci
Sascha Silbe
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sascha Silbe
- [U-Boot] [PATCH v4 06/10] block: mvsata: add dove include
Sascha Silbe
- [U-Boot] [PATCH v4 07/10] NET: phy: add 88E1310 PHY initialization
Sascha Silbe
- [U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support
Sascha Silbe
- [U-Boot] [PATCH v4 09/10] NET: mvgbe: add support for Dove
Sascha Silbe
- [U-Boot] [PATCH v4 10/10] Boards: Add support for SolidRun CuBox
Sascha Silbe
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Sascha Silbe
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - zynq
Michal Simek
- [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support
Michal Simek
- [U-Boot] [PATCH v2 1/7] fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH v2 2/7] fpga: Fix debug message compilation error
Michal Simek
- [U-Boot] [PATCH v2 3/7] cmd: fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c
Michal Simek
- [U-Boot] [PATCH v2 5/7] cmd: fpga: Do not include net.h
Michal Simek
- [U-Boot] [PATCH v2 6/7] fpga: zynq: Add support for loading bitstream
Michal Simek
- [U-Boot] [PATCH v2 7/7] fpga: Check device name against bitstream name
Michal Simek
- [U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO
Michal Simek
- [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c
Michal Simek
- [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support
Michal Simek
- [U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO
Michal Simek
- [U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support
Michal Simek
- [U-Boot] [PATCH v3 1/9] fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH v3 2/9] fpga: Fix debug message compilation error
Michal Simek
- [U-Boot] [PATCH v3 3/9] cmd: fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH v3 4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c
Michal Simek
- [U-Boot] [PATCH v3 5/9] fpga: Change the first parameter in fpga_loadbitstream
Michal Simek
- [U-Boot] [PATCH v3 6/9] cmd: fpga: Do not include net.h
Michal Simek
- [U-Boot] [PATCH v3 7/9] fpga: zynq: Add support for loading bitstream
Michal Simek
- [U-Boot] [PATCH v3 8/9] fpga: Check device name against bitstream name
Michal Simek
- [U-Boot] [PATCH v3 9/9] fpga: Remove all CONFIG_SYS_* fpga related options
Michal Simek
- [U-Boot] [PATCH 1/2] microblaze: bootm: Fix coding style issues
Michal Simek
- [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd
Michal Simek
- [U-Boot] Pull request - fpga
Michal Simek
- [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd
Michal Simek
- [U-Boot] [PATCH v2 1/2] microblaze: bootm: Fix coding style issues
Michal Simek
- [U-Boot] [PATCH v2 2/2] microblaze: bootm: Add support for loading initrd
Michal Simek
- [U-Boot] [RFC PATCH] patman: Do not hardcode python path
Michal Simek
- [U-Boot] nand onfi 8bit/16bit bus support
Michal Simek
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
Michal Simek
- [U-Boot] nand onfi 8bit/16bit bus support
Michal Simek
- [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
Michal Simek
- [U-Boot] Limitations/Considerations when programming U-Boot
Oliver Stäbler
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue
Kuo-Jung Su
- [U-Boot] [PATCH v4 0/7] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities
Kuo-Jung Su
- [U-Boot] [PATCH v4 3/7] arm: add Faraday interrupt controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4 4/7] arm: add Faraday FTTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v4 5/7] arm: add Faraday FTPWMTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility
Kuo-Jung Su
- [U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v4 0/2] usb: ehci: add Faraday USB EHCI&Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4] mmc: update Faraday FTSDC010 for rw performance
Kuo-Jung Su
- [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] [PATCH v4] net: update FTGMAC100 for MMU/D-cache support
Kuo-Jung Su
- [U-Boot] [PATCH v4] spi: add Faraday FTSPI010 SPI controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2] video: add Faraday FTLCDC200 LCD controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v4 03/16] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v5] nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5 0/4] usb: add Faraday EHCI & Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v5 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v5 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v6 0/4] usb: add Faraday EHCI & Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v6 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v6 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v7 0/4] usb: add Faraday EHCI & Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v7 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v7 2/4] usb: ehci: add weak-aliased function for PORTSC
Kuo-Jung Su
- [U-Boot] [PATCH v7 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v7 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v8 0/4] usb: add Faraday EHCI & Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v8 1/4] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC
Kuo-Jung Su
- [U-Boot] [PATCH v8 3/4] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v8 4/4] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Kuo-Jung Su
- [U-Boot] [PATCH v9 0/5] usb: add Faraday EHCI & Gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access
Kuo-Jung Su
- [U-Boot] [PATCH v9 2/5] usb: ehci: add weak-aliased function for PORTSC
Kuo-Jung Su
- [U-Boot] [PATCH v9 3/5] usb: hub: make minimum power-on delay configurable
Kuo-Jung Su
- [U-Boot] [PATCH v9 4/5] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] ARM v7: Flush icache when executing a program with go
Kuo-Jung Su
- [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Kuo-Jung Su
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Kuo-Jung Su
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Kuo-Jung Su
- [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash
Kuo-Jung Su
- [U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined
Kuo-Jung Su
- [U-Boot] [Patch v2, batch 2 17/23] powerpc/85xx: add missing QMAN frequency calculation
York Sun
- [U-Boot] [Patch v2, batch 2 03/23] powerpc/pcie: add PCIe version 3.x support
York Sun
- [U-Boot] [PATCH v3, batch 3 01/17] common: Update cmd_bdinfo for PPC
York Sun
- [U-Boot] [PATCH] powerpc/pixis: Fix pixis help message
York Sun
- [U-Boot] [Patch v2] powerpc/pixis: Fix pixis help message
York Sun
- [U-Boot] [U-boot]: MMC: add sdhci generic framework
Jagan Teki
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Jagan Teki
- [U-Boot] Issue in DWMMC in mainline
Jagan Teki
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Jagan Teki
- [U-Boot] [PATCH] SPI: Winbond: Add W25Q32 to spi flash table
Jagan Teki
- [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW
Jagan Teki
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Jagan Teki
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Jagan Teki
- [U-Boot] U-Boot code git versions problem
Jagan Teki
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Jagan Teki
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jagan Teki
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jagan Teki
- [U-Boot] [PATCH] MMC: DWMMC: Fix FIFO_DEPTH calculation
Jagan Teki
- [U-Boot] [PATCH 0/2 V4] SPI: Enable SPI_PREAMBLE Mode
Jagan Teki
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Jagan Teki
- [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW
Jagan Teki
- [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash
Jagan Teki
- [U-Boot] [PATCH] SF: Add Spansion S25FL064P IDs
Jagan Teki
- [U-Boot] [PATCH] sf: spansion: Add support for S25FL128S
Jagan Teki
- [U-Boot] [PATCH 4/4] sf: winbond: Add support for W25Q256
Jagan Teki
- [U-Boot] [PATCH 0/4] sf: Accessing > 16MBytes flashes in existing 3-byte addr mode.
Jagan Teki
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Jagan Teki
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Jagan Teki
- [U-Boot] [HELP]: sf: winbond: add W25Q32
Jagan Teki
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Jagan Teki
- [U-Boot] SF: Add Spansion S25FL064P IDs
Jagan Teki
- [U-Boot] [U-Boot, v2] sf: winbond: Add support for W25PXX SPI flash
Jagan Teki
- [U-Boot] [U-Boot,4/4] sf: winbond: Add support for W25Q256
Jagan Teki
- [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes
Jagan Teki
- [U-Boot] Soft_spi questions
Jagan Teki
- [U-Boot] [PATCH v2 07/13] sf: winbond: add W25Q32DW
Jagan Teki
- [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
Jagan Teki
- [U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S
Jagan Teki
- [U-Boot] [U-boot]: MMC: add sdhci generic framework
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 0/5] sf: Code cleanup patch set
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 1/5] sf: eon|spansion|ramtron: Fix code cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 2/5] sf: sst: Fix code cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 3/5] sf: stmicro: Fix code cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 4/5] sf: Fix line over 80 chars cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 5/5] cmd_sf: Fix code cleanup
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 0/6] sf: spansion|winbond: ID table corrections/updates
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 1/6] sf: spansion: Update the name for S25FL256S flash
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 2/6] sf: winbond: Add support for W25Q80BW
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 3/6] sf: winbond: Correct the nr_blocks used for W25Q32DW
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 4/6] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 5/6] sf: winbond: Add support for W25Q128FW
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH 6/6] sf: winbond: Add support for W25Q16DW
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 0/2] cmd_sf: print message support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 1/2] cmd_sf: Add print mesg for 'sf erase' command
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 2/2] cmd_sf: Add print mesgs on sf read/write commands
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT PATCH] sf: Fix sf read for memory-mapped SPI flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 0/8] sf: spansion|winbond: ID table corrections/updates
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 1/8] sf: spansion: Update the name for S25FL256S flash
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 2/8] sf: spansion: Add support for S25FL128S_64K
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 3/8] sf: winbond: Add support for W25Q80BW
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 4/8] sf: winbond: Correct the nr_blocks used for W25Q32DW
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 6/8] sf: winbond: Add support for W25Q128FW
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 7/8] sf: winbond: Add support for W25Q16DW
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 8/8] sf: winbond: Add support for W25QXXXFV
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 00/16] sf: Update sf framework to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 01/16] sf: Add bank address register writing support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 02/16] sf: Add bank address register reading support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 03/16] sf: Add extended addr write support for winbond|stmicro
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 04/16] sf: Add extended addr read support for winbond|stmicro
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 05/16] sf: read flash bank addr register at probe time
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 07/16] sf: Update sf read to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 08/16] sf: Use spi_flash_addr() in write call
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 09/16] sf: stmicro: Add support for N25Q512
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 10/16] sf: stmicro: Add support for N25Q512A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 11/16] sf: stmicro: Add support for N25Q1024
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 12/16] sf: stmicro: Add support for N25Q1024A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 13/16] sf: spansion: Add support for S25FL512S_256K
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 14/16] sf: Use spi_flash_read_common() in write status poll
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 15/16] sf: Remove spi_flash_cmd_poll_bit()
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagannadha Sutradharudu Teki
- [U-Boot] BeagleBone u-boot bug in arch/arm/include/asm/arch-am33xx/ddr_defs.h
Matt Thomas
- [U-Boot] [PATCH v2 1/6] imx: iomux-v3: Add iomux-mx25.h
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/6] imx: mx25pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/6] imx: mx25pdk: Fix GPIO assignments
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/6] imx: tx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 5/6] imx: zmx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 6/6] imx: mx25: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH 01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
Benoît Thébaudeau
- [U-Boot] [PATCH 02/12] imx: iomux-v3: Add missing definitions to iomux-mx51.h
Benoît Thébaudeau
- [U-Boot] [PATCH 03/12] imx: mx51evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 05/12] imx: vision2: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 06/12] imx: iomux-v3: Add iomux-mx53.h
Benoît Thébaudeau
- [U-Boot] [PATCH 07/12] imx: ima3-mx53: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 08/12] imx: mx53ard: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 09/12] imx: mx53evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 10/12] imx: mx53loco: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 11/12] imx: mx53smd: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH v3 01/25] imx: iomux-v3: Add iomux-mx25.h
Benoît Thébaudeau
- [U-Boot] [PATCH v3 02/25] imx: mx25pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 03/25] imx: mx25pdk: Fix GPIO assignments
Benoît Thébaudeau
- [U-Boot] [PATCH v3 04/25] imx: tx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 05/25] imx: zmx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 06/25] imx: mx25: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 07/25] imx: iomux-v3: Add iomux-mx35.h
Benoît Thébaudeau
- [U-Boot] [PATCH v3 08/25] imx: flea3: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 09/25] imx: mx35pdk: Fix WDOG_RST iomux function
Benoît Thébaudeau
- [U-Boot] [PATCH v3 10/25] imx: mx35pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 11/25] imx: woodburn: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 12/25] imx: mx35: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 13/25] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
Benoît Thébaudeau
- [U-Boot] [PATCH v3 14/25] imx: iomux-v3: Add missing definitions to iomux-mx51.h
Benoît Thébaudeau
- [U-Boot] [PATCH v3 15/25] imx: mx51evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 16/25] imx: mx51_efikamx/sb: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 17/25] imx: vision2: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 18/25] imx: iomux-v3: Add iomux-mx53.h
Benoît Thébaudeau
- [U-Boot] [PATCH v3 19/25] imx: ima3-mx53: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 20/25] imx: mx53ard: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 21/25] imx: mx53evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 22/25] imx: mx53loco: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 23/25] imx: mx53smd: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v3 25/25] imx: mx5: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: spl: Merge libimx-common make rules
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO
Benoît Thébaudeau
- [U-Boot] [PATCH] arm: fix a comment
Benoît Thébaudeau
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH 2/4] arm: make __image_copy_{start, end} compiler-generated
Benoît Thébaudeau
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/4] tx25: copy SPL directly, not using relocate_code.
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/4] mx31pdk: copy SPL directly, not using relocate_code.
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/4] arm: do not compile relocate_code() for SPL builds
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH 0/5] Optimize ARM relocation
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600
Benoît Thébaudeau
- [U-Boot] [PATCH] mmc and fat bug fixes
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH v3 4/4] arm: factorize relocate_code routine
Benoît Thébaudeau
- [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances
Benoît Thébaudeau
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Benoît Thébaudeau
- [U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Benoît Thébaudeau
- [U-Boot] dfu: dfu and UBI Volumes
Benoît Thébaudeau
- [U-Boot] dfu: dfu and UBI Volumes
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated
Benoît Thébaudeau
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Benoît Thébaudeau
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610
Benoît Thébaudeau
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board
Benoît Thébaudeau
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Benoît Thébaudeau
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Benoît Thébaudeau
- [U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document
Benoît Thébaudeau
- [U-Boot] Compiling U-BOOT bootloader on x86
Ravi Kant Tiwari
- [U-Boot] Uboot Analysis Question
Yong Yun Toh
- [U-Boot] ulpi patch in uboot
Michael Trimarchi
- [PATCH] omap-ulpi: Fix the omap3/4 access function to the bus
Michael Trimarchi
- [U-Boot] ulpi patch in uboot
Michael Trimarchi
- [U-Boot] ulpi patch in uboot
Michael Trimarchi
- [U-Boot] u-boot USB question
Michael Trimarchi
- [U-Boot] [PATCH OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus.
Michael Trimarchi
- [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.
Michael Trimarchi
- [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus.
Michael Trimarchi
- [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()
Michael Trimarchi
- [U-Boot] [PATCH v1 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
Andrii Tseglytskyi
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v1 2/2] OMAP5: add ABB setup for MPU voltage domain
Andrii Tseglytskyi
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v02 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
Andrii Tseglytskyi
- [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v02 2/2] OMAP5: add ABB setup for MPU voltage domain
Andrii Tseglytskyi
- [U-Boot] [PATCH v1 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v03 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
Andrii Tseglytskyi
- [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v03 2/2] OMAP5: add ABB setup for MPU voltage domain
Andrii Tseglytskyi
- [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
Andrii Tseglytskyi
- [U-Boot] mx23-olinuxino: occasional memory errors
Tsvetan Usunov, OLIMEX Ltd
- [U-Boot] mx23-olinuxino: occasional memory errors
Tsvetan Usunov, OLIMEX Ltd
- [U-Boot] mx23-olinuxino: occasional memory errors
Tsvetan Usunov, OLIMEX Ltd
- [U-Boot] mx23-olinuxino: occasional memory errors
Tsvetan Usunov, OLIMEX Ltd
- [U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250
Hung-ying Tyan
- [U-Boot] [PATCH v5 1/7] cros: add cros_ec driver
Hung-ying Tyan
- [U-Boot] [PATCH v5 2/7] cros: add I2C support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v5 3/7] cros: exynos: add SPI support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v5 4/7] cros: add LPC support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v5 5/7] cros: adds cros_ec keyboard driver
Hung-ying Tyan
- [U-Boot] [PATCH v5 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts
Hung-ying Tyan
- [U-Boot] [PATCH v5 7/7] cros: exynos: enable cros-ec for smdk5250
Hung-ying Tyan
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Tapani Utriainen
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Tapani Utriainen
- [U-Boot] [PATCH] Wandboard: Add support for Wandboard quad
Tapani Utriainen
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Tapani Utriainen
- [U-Boot] Unable to understand flow of U-Boot Code.
Rajdeep Vaghasia
- [U-Boot] "No status update" errors in OMAP mmc_send_cmd()
Tomi Valkeinen
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Marek Vasut
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations
Marek Vasut
- [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Marek Vasut
- [U-Boot] [PATCH 1/9] mxs: Make the names of the elements of mxs_pinctrl_regs shorter
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23evk: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23_olinuxino: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 7/9] mxs: spl_mem_init: Remove unneeded DRAM configurations
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support for mx23
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Marek Vasut
- [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions
Marek Vasut
- [U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable
Marek Vasut
- [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit
Marek Vasut
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Marek Vasut
- [U-Boot] [PATCH v3 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Marek Vasut
- [U-Boot] [PATCH v3 1/7] mx23: Fix pad voltage selection bit
Marek Vasut
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Marek Vasut
- [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
Marek Vasut
- [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
Marek Vasut
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Marek Vasut
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Marek Vasut
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Marek Vasut
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Marek Vasut
- [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
Marek Vasut
- [U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit
Marek Vasut
- [U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
Marek Vasut
- [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable
Marek Vasut
- [U-Boot] [PATCH] mx23: Add a README file
Marek Vasut
- [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
Marek Vasut
- [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs
Marek Vasut
- [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory
Marek Vasut
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
Marek Vasut
- [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory
Marek Vasut
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function
Marek Vasut
- [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path
Marek Vasut
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Marek Vasut
- [U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa.git/master
Marek Vasut
- [U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Marek Vasut
- [U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa.git/master
Marek Vasut
- [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support
Marek Vasut
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH v4 2/2] usb: gadget: add Faraday FOTG210 USB gadget support
Marek Vasut
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Marek Vasut
- [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable
Marek Vasut
- [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Marek Vasut
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Marek Vasut
- [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes
Marek Vasut
- [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
Marek Vasut
- [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
Marek Vasut
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Marek Vasut
- [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable
Marek Vasut
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Marek Vasut
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Marek Vasut
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Marek Vasut
- [U-Boot] [PATCH] usb: asix: Move software resets to basic_init
Marek Vasut
- [U-Boot] [PATCH] usb: asix: Move software resets to basic_init
Marek Vasut
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Marek Vasut
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Marek Vasut
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Marek Vasut
- [U-Boot] Question: issues for usb keyboard work with OHCI HCD
Marek Vasut
- [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi
Marek Vasut
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Marek Vasut
- [U-Boot] [RFC PATCH v2 0/14] Driver model implementation, tests, demo and GPIO
Marek Vasut
- [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support
Marek Vasut
- [U-Boot] [PATCH] disk: Fix possible out-of-bounds access in part_efi.c
Marek Vasut
- [U-Boot] [PATCH] ppc: ppmc7xx: Fix possible out-of-bound access
Marek Vasut
- [U-Boot] [PATCH 0/2] Add ccache support
Marek Vasut
- [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache
Marek Vasut
- [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache
Marek Vasut
- [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache
Marek Vasut
- [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Marek Vasut
- [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: add missing cache managment
Marek Vasut
- [U-Boot] SF: Add Spansion S25FL064P IDs
Marek Vasut
- [U-Boot] [PATCH] da830: add MMC support
Vishwanathrao Badarkhe, Manish
- [U-Boot] [PATCH] da830: add MMC support
Vishwanathrao Badarkhe, Manish
- [U-Boot] [PATCH] da830: add MMC support
Vishwanathrao Badarkhe, Manish
- [U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree
Vishwanathrao Badarkhe, Manish
- [U-Boot] [PATCH 0/3] ARM: OMAP4+: Misc Cleanup
Lokesh Vutla
- [U-Boot] [PATCH 1/3] ARM: OMAP4+: Cleanup header files
Lokesh Vutla
- [U-Boot] [PATCH 2/3] ARM: OMAP5: clocks: Do not enable sgx clocks
Lokesh Vutla
- [U-Boot] [PATCH 3/3] ARM: OMAP4+: pmic: Make generic bus init and write functions
Lokesh Vutla
- [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH 01/12] ARM: DRA7xx: Add control id code for DRA7xx
Lokesh Vutla
- [U-Boot] [PATCH 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC
Lokesh Vutla
- [U-Boot] [PATCH 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC
Lokesh Vutla
- [U-Boot] [PATCH 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages
Lokesh Vutla
- [U-Boot] [PATCH 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH 06/12] ARM: DRA7xx: Change the Debug UART to UART1
Lokesh Vutla
- [U-Boot] [PATCH 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ
Lokesh Vutla
- [U-Boot] [PATCH 08/12] ARM: DRA7xx: Correct SRAM END address
Lokesh Vutla
- [U-Boot] [PATCH 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH 10/12] ARM: DRA7xx: Update pinmux data
Lokesh Vutla
- [U-Boot] [PATCH 11/12] ARM: DRA7xx: clocks: Update PLL values
Lokesh Vutla
- [U-Boot] [PATCH 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board
Lokesh Vutla
- [U-Boot] [PATCH 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH V2 0/4] ARM: OMAP2+: Misc Cleanup
Lokesh Vutla
- [U-Boot] [PATCH V2 1/4] ARM: OMAP4+: Cleanup header files
Lokesh Vutla
- [U-Boot] [PATCH V2 2/4] ARM: OMAP5: clocks: Do not enable sgx clocks
Lokesh Vutla
- [U-Boot] [PATCH V2 3/4] ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h
Lokesh Vutla
- [U-Boot] [PATCH V2 4/4] ARM: OMAP4+: pmic: Make generic bus init and write functions
Lokesh Vutla
- [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH V2 01/12] ARM: DRA7xx: Add control id code for DRA7xx
Lokesh Vutla
- [U-Boot] [PATCH V2 02/12] ARM: DRA7xx: power Add support for tps659038 PMIC
Lokesh Vutla
- [U-Boot] [PATCH V2 03/12] ARM: DRA7xx: clocks: Fixing i2c_init for PMIC
Lokesh Vutla
- [U-Boot] [PATCH V2 04/12] ARM: OMAP5: DRA7xx: support class 0 optimized voltages
Lokesh Vutla
- [U-Boot] [PATCH V2 05/12] ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH V2 06/12] ARM: DRA7xx: Change the Debug UART to UART1
Lokesh Vutla
- [U-Boot] [PATCH V2 07/12] ARM: DRA7xx: Correct the SYS_CLK to 20MHZ
Lokesh Vutla
- [U-Boot] [PATCH V2 08/12] ARM: DRA7xx: Correct SRAM END address
Lokesh Vutla
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH V2 10/12] ARM: DRA7xx: Update pinmux data
Lokesh Vutla
- [U-Boot] [PATCH V2 11/12] ARM: DRA7xx: clocks: Update PLL values
Lokesh Vutla
- [U-Boot] [PATCH V2 12/12] ARM: DRA7xx: EMIF: Change settings required for EVM board
Lokesh Vutla
- [U-Boot] [PATCH] arm/km: fix u-boot update functionality
Prafulla Wadaskar
- [U-Boot] [PATCH v4 10/10] arm/km: fix u-boot update functionality
Prafulla Wadaskar
- [U-Boot] [PATCH v4 08/10] NET: mvgbe: add phylib support
Prafulla Wadaskar
- [U-Boot] disassembler ?
Brad Walker
- [U-Boot] disassembler ?
Brad Walker
- [U-Boot] [PATCH v2 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Alison Wang
- [U-Boot] [PATCH v2 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Alison Wang
- [U-Boot] [PATCH v2 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v2 3/6] arm: mvf600: Add FEC support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v2 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v2 5/6] arm: mvf600: Add uart support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v2 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Alison Wang
- [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
Alison Wang
- [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
Alison Wang
- [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v3 3/6] net: fec_mxc: Add support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v3 4/6] arm: mvf600: Add watchdog support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v3 5/6] arm: mvf600: Add uart support for Vybrid MVF600
Alison Wang
- [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
Alison Wang
- [U-Boot] [PATCH v4 0/7] arm: vf610: Add Freescale Vybrid VF610 CPU and VF610TWR board support
Alison Wang
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Alison Wang
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Alison Wang
- [U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610
Alison Wang
- [U-Boot] [PATCH v4 4/7] arm: vf610: Add watchdog support for Vybrid VF610
Alison Wang
- [U-Boot] [PATCH v4 5/7] arm: vf610: Add uart support for Vybrid VF610
Alison Wang
- [U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document
Alison Wang
- [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board
Alison Wang
- [U-Boot] Regression from v2013.04-rc3 with sdcard detection
Stephen Warren
- [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
Stephen Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Stephen Warren
- [U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Stephen Warren
- [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
Stephen Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Stephen Warren
- [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support
Stephen Warren
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
Stephen Warren
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2Cframework
Stephen Warren
- [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
Stephen Warren
- [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support
Stephen Warren
- [U-Boot] [PATCH 1/2] lcd: add functions to setup up simplefb device tree
Stephen Warren
- [U-Boot] [PATCH V2 1/2] lcd: add functions to setup up simplefb device tree
Stephen Warren
- [U-Boot] [PATCH V2 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
Stephen Warren
- [U-Boot] [PATCH] tegra: always build u-boot-nodtb-tegra.bin
Stephen Warren
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Stephen Warren
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Stephen Warren
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Stephen Warren
- [U-Boot] [PATCH RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: tegra: support SKU 1 of Tegra114
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: tegra: support SKU 7 of Tegra20
Stephen Warren
- [U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed
Stephen Warren
- [U-Boot] [PATCH 1/3] mmc: report capacity for the selected partition
Stephen Warren
- [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET
Stephen Warren
- [U-Boot] [PATCH 3/3] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
Stephen Warren
- [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET
Stephen Warren
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH V2 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH V2 2/4] mmc: report capacity for the selected partition
Stephen Warren
- [U-Boot] [PATCH V2 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET
Stephen Warren
- [U-Boot] [PATCH V2 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
Stephen Warren
- [U-Boot] [PATCH] ext4: assign get_fs()->dev_desc before using it
Stephen Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH V3 2/4] mmc: report capacity for the selected partition
Stephen Warren
- [U-Boot] [PATCH V3 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET
Stephen Warren
- [U-Boot] [PATCH V3 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
Stephen Warren
- [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: only enable SCU on Tegra20
Stephen Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH] usb: ehci: add missing cache managment
Stephen Warren
- [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()
Stephen Warren
- [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()
Stephen Warren
- [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree
Stephen Warren
- [U-Boot] [PATCH V2 REPOST 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
Stephen Warren
- [U-Boot] [PATCH V2] input: simplify key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Stephen Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Warren
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Tom Warren
- [U-Boot] [PATCH] Tegra: clk: always use find_best_divider() for periph clocks
Tom Warren
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Tom Warren
- [U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
Tom Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Tom Warren
- [U-Boot] [PATCH] fdt: Enhance dts/Makefile to be all things to all men
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [PATCH 3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd
Julius Werner
- [U-Boot] [PATCH 2/2] usb: gadget: Use unaligned access for wMaxPacketSize
Piotr Wilczek
- [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH v3 01/12] pmic:max77686: add function to set voltage and mode
Piotr Wilczek
- [U-Boot] [PATCH v3 02/12] drivers:power:max77693: add support for new multi function pmic max77693
Piotr Wilczek
- [U-Boot] [PATCH v3 03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
Piotr Wilczek
- [U-Boot] [PATCH v3 04/12] i2c:multi_i2c: adapt file to new i2c framework
Piotr Wilczek
- [U-Boot] [PATCH v3 05/12] power: fix pmic command
Piotr Wilczek
- [U-Boot] [PATCH v3 06/12] drivers:power:power_i2c: adapt file to new i2c framework
Piotr Wilczek
- [U-Boot] [PATCH v3 07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework
Piotr Wilczek
- [U-Boot] [PATCH v3 08/12] drivers:video:s6e8ax0: change data_to_send array to static
Piotr Wilczek
- [U-Boot] [PATCH v3 09/12] drivers:lcd: fix unaligned access on lcd
Piotr Wilczek
- [U-Boot] [PATCH v3 10/12] samsung: trats2: add support for new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH v3 11/12] board:VCMA9 switch to ne i2c framework
Piotr Wilczek
- [U-Boot] [PATCH v3 12/12] board:smdk5250: switch to new i2c framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode
Piotr Wilczek
- [U-Boot] [PATCH] drivers:power:max77693: add support for new multi function pmic max77693
Piotr Wilczek
- [U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
Piotr Wilczek
- [U-Boot] [PATCH] drivers:video:s6e8ax0: change data_to_send array to static
Piotr Wilczek
- [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Piotr Wilczek
- [U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH V3 1/3] power:battery: add battery support for Trats2 board
Piotr Wilczek
- [U-Boot] [PATCH V3 2/3] i2c:multi_i2c: add new macros I2C_7 and I2C_8
Piotr Wilczek
- [U-Boot] [PATCH V3 3/3] samsung: trats2: add support for new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Piotr Wilczek
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Robert Winkler
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
Robert Winkler
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Robert Winkler
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Robert Winkler
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
Scott Wood
- [U-Boot] [PATCH v4] nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] nand onfi 8bit/16bit bus support
Scott Wood
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
Scott Wood
- [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx: work around erratum A-006593
Scott Wood
- [U-Boot] [PATCH 2/4] mpc8xx: Correct cast of im_cpm.cp_dparam
Scott Wood
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
Scott Wood
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Scott Wood
- [U-Boot] [PATCH v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7
Scott Wood
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Scott Wood
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Scott Wood
- [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS
Scott Wood
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] Questions about U-boot of customized MPC8315E board
Scott Wood
- [U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command
Scott Wood
- [U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Scott Wood
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Scott Wood
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Scott Wood
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] nand/fsl_elbc: detect page size at runtime
Scott Wood
- [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks
Scott Wood
- [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks
Scott Wood
- [U-Boot] mtd: nand: fix the partial page write condition
Scott Wood
- [U-Boot] mtd: nand: use ssize_t instead of size_t to prevent infinite loop
Scott Wood
- [U-Boot] nand/fsl_ifc: Convert to self-init
Scott Wood
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Scott Wood
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Scott Wood
- [U-Boot] [U-Boot,v2] mtd: resync with Linux-3.7.1
Scott Wood
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Scott Wood
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] [PATCH v2] sf: spansion: Add support for S25FL128S
Xie Xiaobo
- [U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & RevD boards
Shaohui Xie
- [U-Boot] [PATCH] arm: fix a comment
Masahiro Yamada
- [U-Boot] [PATCH] smc911x: fix the timeout detection
Masahiro Yamada
- [U-Boot] [PATCH v2] arm: fix a comment
Masahiro Yamada
- [U-Boot] [PATCH] arm: fix a comment
Masahiro Yamada
- [U-Boot] [PATCH v2] arm: fix a comment
Masahiro Yamada
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Masahiro Yamada
- [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Masahiro Yamada
- [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files
Masahiro Yamada
- [U-Boot] [PATCH] .gitignore: add GNU GLOBAL files
Masahiro Yamada
- [U-Boot] [PATCH v2] arm: fix a comment
Masahiro Yamada
- [U-Boot] [PATCH v3] cosmetic: arm: fix comments in arch/arm/lib/crt0.S
Masahiro Yamada
- [U-Boot] [PATCH v2] arm: fix a comment
Masahiro Yamada
- [U-Boot] [PATCH 0/2] fix flash_get_info function
Masahiro Yamada
- [U-Boot] [PATCH 1/2] cosmetic: cfi_flash: delete a space after an unary operator
Masahiro Yamada
- [U-Boot] [PATCH 2/2] cfi_flash: return NULL for invalid base address input
Masahiro Yamada
- [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program
Masahiro Yamada
- [U-Boot] [PATCH] cfi_flash: use CFI driver without a monitor program
Masahiro Yamada
- [U-Boot] [PATCH] cmd_mem: fix cp command
Masahiro Yamada
- [U-Boot] [PATCH] common: board_f: Do not call board_postclk_init twice
Masahiro Yamada
- [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
Masahiro Yamada
- [U-Boot] [PATCH 0/2] fix displaying IRQ stack info
Masahiro Yamada
- [U-Boot] [PATCH 1/2] arm: fix displaying IRQ stack info
Masahiro Yamada
- [U-Boot] [PATCH 2/2] common: arm: fix displaying IRQ stack info
Masahiro Yamada
- [U-Boot] [PATCH] generic_board: reduce the redundancy of gd_t struct members
Masahiro Yamada
- [U-Boot] [RFC PATCH 4/7] Add Kconfig scripts and related material
Masahiro Yamada
- [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
Masahiro Yamada
- [U-Boot] [RFC PATCH 5/7] Adjust Kconfig scripts for use by U-Boot
Masahiro Yamada
- [U-Boot] Your message to U-Boot awaits moderator approval
Sergey Yanovich
- [U-Boot] [PATCH v2] arm: pxa: Add support for ICP DAS LP-8x4x
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Sergey Yanovich
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Zhang Ying-B40530
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
Zhang Ying-B40530
- [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Zhang Ying-B40530
- [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
Zhang Ying-B40530
- [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
Zhang Ying-B40530
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS
Zhang Ying-B40530
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Zhang Ying-B40530
- [U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL
Zhang Ying-B40530
- [U-Boot] FW: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Zhang Ying-B40530
- [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.
Sonic Zhang
- [U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder.
Sonic Zhang
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] [PATCH v1 2/2] blackfin: bf609: add softswitch config command
Sonic Zhang
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.
Sonic Zhang
- [U-Boot] [PATCH v1 2/3] blackfin: Add memory virtual console to blackfin serial driver.
Sonic Zhang
- [U-Boot] [PATCH v1 3/3] blackfin: Uart divisor should be set after their values are generated.
Sonic Zhang
- [U-Boot] [PATCH v1 1/3] blackfin: Enable early print via the generic serial API.
Sonic Zhang
- [U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch
Sonic Zhang
- [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command
Sonic Zhang
- [U-Boot] [PATCH v2 1/2] blackfin: bf609: implement soft switch
Sonic Zhang
- [U-Boot] [PATCH v2 2/2] blackfin: bf609: add softswitch config command
Sonic Zhang
- [U-Boot] Pull request v2: u-boot-blackfin
Sonic Zhang
- [U-Boot] mx23-olinuxino: occasional memory errors
Kiril Zyapkov
- [U-Boot] mx23-olinuxino: occasional memory errors
Kiril Zyapkov
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Marc Zyngier
- [U-Boot] uboot source code for MPC8641D & MPC8548E
answerme
- [U-Boot] [PATCH] Revert wrong removal of nand_init and nand_deselect
stefano babic
- [U-Boot] Netconsole in u-Boot-2013.01 seems to be broken.
bodhi
- [U-Boot] [PATCH v2] arm: fix a comment
y at epochmail.jp.panasonic.com
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD card/SPI flash with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH] drivers/mmc: move spl_mmc.c to common/spl
ying.zhang at freescale.com
- [U-Boot] [PATCH] powerpc/mpc85xx: support application without resetvec segment in the linker script
ying.zhang at freescale.com
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
ying.zhang at freescale.com
- [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
ying.zhang at freescale.com
- [U-Boot] [PATCH] Makefile: move the common makefile line out of the CONFIG_SPL_BUILD ifdef
ying.zhang at freescale.com
- [U-Boot] [PATCH] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
ying.zhang at freescale.com
- [U-Boot] [PATCH v2] powerpc/mpc85xx: The end address of the bss in the SPL should be 4byte alignment
ying.zhang at freescale.com
- [U-Boot] [PATCH v3] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v2] Makefile: move the common makefile line to public area
ying.zhang at freescale.com
- [U-Boot] [PATCH v3] powerpc/mpc85xx: modify the function clear_bss and the end address of the BSS
ying.zhang at freescale.com
- [U-Boot] [PATCH] Add the symbol for the minimal SPL used to eliminate unused code
ying.zhang at freescale.com
- [U-Boot] [PATCH] powerpc/p1022ds: boot from SD Card with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v4] common/Makefile: Add new symbol CONFIG_SPL_ENV_xxx for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v5] Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v2] spl: Make CONFIG_SPL_BUILD contain more functionality
ying.zhang at freescale.com
- [U-Boot] [PATCH v3] Makefile: move the common makefile line to public area
ying.zhang at freescale.com
- [U-Boot] [PATCH 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script
ying.zhang at freescale.com
- [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS
ying.zhang at freescale.com
- [U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area
ying.zhang at freescale.com
- [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
ying.zhang at freescale.com
- [U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH v2 0/10] Update gdsys ppc4xx-based boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 01/10] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 02/10] powerpc/ppc4xx: Add gdsys mclink interface
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 03/10] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 04/10] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 05/10] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 06/10] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 07/10] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 08/10] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 09/10] powerpc/ppc4xx: Consider gdsys FPGA OSD size
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v2 10/10] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH 0/5] Resync libfdt with dtc upstream
gvb.uboot at gmail.com
- [U-Boot] [PATCH 1/5] Export fdt_stringlist_contains()
gvb.uboot at gmail.com
- [U-Boot] [PATCH 2/5] Fix typo
gvb.uboot at gmail.com
- [U-Boot] [PATCH 3/5] Added license header to dtc/libfdt/fdt.h and libfdt_env.h
gvb.uboot at gmail.com
- [U-Boot] [PATCH 4/5] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
gvb.uboot at gmail.com
- [U-Boot] [PATCH 5/5] Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h
gvb.uboot at gmail.com
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
menon.nishanth at gmail.com
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
menon.nishanth at gmail.com
- [U-Boot] [PATCH V2] OMAP5: Power: Add more functionality to Palmas driver
menon.nishanth at gmail.com
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Mathias leblanc
- [U-Boot] JFFS2 seems to drop nand data with ECC corrections
passal
- [U-Boot] Unable to receive DHCP packets (qemu-system-arm)
pietrushnic
- [U-Boot] Not able load u-boot from flash to ddr
sadashiva reddy
- [U-Boot] Patch for RAMBOOT
sadashiva reddy
- [U-Boot] bug regarding ext4 filesystem
ScottyYi at s3graphics.com
- [U-Boot] unsupported manufacturer 20 for micron device
sathaps
- [U-Boot] Micron eMMC problem on sabre SD like card
jean-francois simon
- [U-Boot] Compiling U-BOOT bootloader on x86
ravi tiwari
- [U-Boot] Compiling U-BOOT bootloader on x86
ravi tiwari
- [U-Boot] Soft_spi questions
laurent vaudoit
- [U-Boot] Soft_spi questions
laurent vaudoit
- [U-Boot] i2c loop command
TigerLiu at viatech.com.cn
- [U-Boot] fopen/fwrite functions
TigerLiu at viatech.com.cn
- [U-Boot] fopen/fwrite functions
TigerLiu at viatech.com.cn
- [U-Boot] fopen/fwrite functions
TigerLiu at viatech.com.cn
- [U-Boot] readl / writel function questions
TigerLiu at viatech.com.cn
- [U-Boot] about uboot leads to LAN disconnected
wanghgsz
- [U-Boot] 2013 Plumber's CFP: Fastboot
richard -rw- weinberger
- [U-Boot] MPC834x U-Boot problem
davewellz-wurk at yahoo.co.uk
- [U-Boot] Loading Linux Image on AT91SAM9263-EK
pranav yamjala
- [U-Boot] questions about dp83848 on mpc8315e board
du zhenhuan
- [U-Boot] problem about PING error from PC to u-boot
du zhenhuan
- [U-Boot] problem about PING error from PC to u-boot
du zhenhuan
- [U-Boot] Your message to U-Boot awaits moderator approval
Сергей Янович
- [U-Boot] [PATCH] arm: pxa: Add support for ICP DAS LP-8x4x
Сергей Янович
Last message date:
Fri May 31 23:44:45 CEST 2013
Archived on: Mon Jun 17 09:42:12 CEST 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).