[U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox

[Sascha Silbe]

Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com> writes:

> This patch set add support for the Marvell Dove 88AP510 SoC and
> the SolidRun CuBox board based on that SoC. The patch set is divided
> into the four following sections:
[...]

What's the state of this? I tried applying your patch series on top of
current master and getting it to work on a CuBox Pro (2GiB SDRAM instead
of 1GiB), but with no success so far. I changed kwbimage.cfg to match
dramregs_cubox_2gb.txt in Rabeeh's tree and fixed
arch/arm/cpu/armv7/dove/timer.c to work with the generic global_data
(introduced by baa1e53 and 50b1fa3). However there seems to be something
else missing or broken as there's no output whatsoever on the serial
console after booting the new image via UART. The same boot procedure
works fine with an image built using Rabeeh's tree.

Sascha
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 489 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130514/65dbab45/attachment.pgp>