[U-Boot] Pull request - fpga

Albert ARIBAUD albert.u.boot at aribaud.net
Fri May 10 18:33:45 CEST 2013


Hi Michal,

On Mon, 06 May 2013 10:50:44 +0200, Michal Simek <monstr at monstr.eu>
wrote:

> Hi Tom and Albert,
> 
> I have created fpga branch. It is based on zynq patches(and request)
> I sent last week.
> The reason why it is based on it is that new zynq fpga driver
> and changes in zynq I have done.
> Just talk to each other and be aware that this fpga patchset
> is based on zynq one.
> 
> Thanks,
> Michal
> 
> 
> 
> The following changes since commit 8934f7846501070a5b01c1fab5db27559e9d70d1:
> 
>   i2c: zynq: Add support for Xilinx Zynq (2013-04-30 11:39:28 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-microblaze.git fpga
> 
> for you to fetch changes up to b03b25caea1ff3a501161f5bc1ad5e5b5b124e0c:
> 
>   fpga: Remove all CONFIG_SYS_* fpga related options (2013-05-06 10:41:30 +0200)
> 
> ----------------------------------------------------------------
> Michal Simek (9):
>       fpga: Clean coding style
>       fpga: Fix debug message compilation error
>       cmd: fpga: Clean coding style
>       cmd: fpga: Move fpga_loadbitstream to fpga.c
>       fpga: Change the first parameter in fpga_loadbitstream
>       cmd: fpga: Do not include net.h
>       fpga: zynq: Add support for loading bitstream
>       fpga: Check device name against bitstream name
>       fpga: Remove all CONFIG_SYS_* fpga related options
> 
>  arch/arm/cpu/armv7/zynq/slcr.c             |  35 ++++++++++++
>  arch/arm/include/asm/arch-zynq/hardware.h  |  10 +++-
>  arch/arm/include/asm/arch-zynq/sys_proto.h |   3 +
>  board/xilinx/zynq/board.c                  |  37 ++++++++++++
>  common/cmd_fpga.c                          | 254 ++++++++++++++++++++++++++-------------------------------------------------------
>  drivers/fpga/Makefile                      |   1 +
>  drivers/fpga/fpga.c                        | 225 +++++++++++++++++++++++++++++++++++-------------------------------------
>  drivers/fpga/xilinx.c                      | 146 +++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/fpga/zynqpl.c                      | 355 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/altera.h                           |  17 ------
>  include/configs/M54455EVB.h                |   2 +-
>  include/configs/MERGERBOX.h                |   2 +-
>  include/configs/MVBC_P.h                   |   2 +-
>  include/configs/MVBLM7.h                   |   2 +-
>  include/configs/MVSMR.h                    |   2 +-
>  include/configs/omap3_mvblx.h              |   2 +-
>  include/configs/zynq.h                     |   6 ++
>  include/fpga.h                             |  13 +----
>  include/lattice.h                          |   3 -
>  include/xilinx.h                           |  25 +-------
>  include/zynqpl.h                           |  59 +++++++++++++++++++
>  21 files changed, 848 insertions(+), 353 deletions(-)
>  create mode 100644 drivers/fpga/zynqpl.c
>  create mode 100644 include/zynqpl.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list