[U-Boot] [PATCH v4 2/4] tx25: copy SPL directly, not using relocate_code.
Albert ARIBAUD
albert.u.boot at aribaud.net
Sun May 19 13:48:13 CEST 2013
Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- dropped relocate_code() call from tx25 SPL
board/karo/tx25/tx25.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 2952eba..461e21f 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -35,7 +35,21 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
--
1.7.10.4
More information about the U-Boot
mailing list