[U-Boot] [PATCH V2 2/2] ARM: bcm2835: add simplefb DT node during bootz/m

Stephen Warren swarren at wwwdotorg.org
Tue May 14 04:33:58 CEST 2013


Add a DT simple-framebuffer node to DT when booting the Linux kernel.
This will allow the kernel to inherit the framebuffer configuration from
U-Boot, and display a graphical boot console, and even run a full SW-
rendered X server.

Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
Acked-by: Simon Glass <sjg at chromium.org>
---
 board/raspberrypi/rpi_b/rpi_b.c |   14 +++++++++++++-
 include/configs/rpi_b.h         |    2 ++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c
index 6b3e095..16d442a 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi_b/rpi_b.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012-2013 Stephen Warren
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -15,6 +15,8 @@
  */
 
 #include <common.h>
+#include <config.h>
+#include <lcd.h>
 #include <asm/arch/mbox.h>
 #include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
@@ -77,3 +79,13 @@ int board_mmc_init(void)
 	return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
 				  msg_clk->get_clock_rate.body.resp.rate_hz);
 }
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	/*
+	 * For now, we simply always add the simplefb DT node. Later, we
+	 * should be more intelligent, and e.g. only do this if no enabled DT
+	 * node exists for the "real" graphics driver.
+	 */
+	lcd_dt_simplefb_add_node(blob);
+}
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index c18b35b..216c6cb 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -61,6 +61,7 @@
 #define CONFIG_BCM2835_GPIO
 /* LCD */
 #define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
 #define LCD_BPP				LCD_COLOR16
 /*
  * Prevent allocation of RAM for FB; the real FB address is queried
@@ -175,6 +176,7 @@
 
 /* Device tree support for bootm/bootz */
 #define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 /* ATAGs support for bootm/bootz */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
-- 
1.7.10.4



More information about the U-Boot mailing list