[U-Boot] Pull request - zynq

[Albert ARIBAUD]

Hi Michal,

On Tue, 30 Apr 2013 11:49:33 +0200, Michal Simek <monstr at monstr.eu>
wrote:

> Hi Tom and Albert,
> 
> please pull this patchset related to arm zynq to your tree.
> I haven't got any ACK for gem and platform changes but the whole patchset
> was reviewed by Tom.
> Also not all patches are ARM core specific but they are affecting
> zynq platform that's why I think it can go directly to Tom tree.
> 
> Please let me know if you have any problem with it. I can create more
> branches with specific patches which should go through specific trees.
> 
> I have removed fpga related patch because I have some others pending fpga
> patches and I will group them together.
> 
> Thanks,
> Michal
> 
> 
> The following changes since commit d10f68ae47b67acab8b110b5c605dde4197a1820:
> 
>   Prepare v2013.04 (2013-04-19 10:25:43 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-microblaze.git zynq
> 
> for you to fetch changes up to 8934f7846501070a5b01c1fab5db27559e9d70d1:
> 
>   i2c: zynq: Add support for Xilinx Zynq (2013-04-30 11:39:28 +0200)
> 
> ----------------------------------------------------------------
> David Andrey (3):
>       arm: zynq: U-Boot udelay < 1000 FIX
>       net: gem: Pass phy address to init
>       net: gem: Preserve clk on emio interface
> 
> Michal Simek (11):
>       arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses
>       zynq: Move scutimer baseaddr to hardware.h
>       net: phy: Define Marvell 88e1518 phy
>       net: gem: Remove WRAP bit from TX buffer description
>       net: gem: Simplify return path in zynq_gem_recv
>       net: gem: Do not initialize BDs again
>       net: gem: Fix gem driver on 1Gbps LAN
>       zynq: Move macros to hardware.h
>       net: gem: Add support for phy autodetection
>       mmc: Add support for Xilinx Zynq sdhci controller
>       i2c: zynq: Add support for Xilinx Zynq
> 
>  arch/arm/cpu/armv7/zynq/slcr.c             |  26 ++++++++
>  arch/arm/cpu/armv7/zynq/timer.c            |  49 ++++++++++++---
>  arch/arm/include/asm/arch-zynq/hardware.h  |  26 +++++---
>  arch/arm/include/asm/arch-zynq/sys_proto.h |   4 ++
>  board/xilinx/zynq/board.c                  |  29 ++++++++-
>  drivers/i2c/Makefile                       |   1 +
>  drivers/i2c/zynq_i2c.c                     | 306 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/Makefile                       |   1 +
>  drivers/mmc/zynq_sdhci.c                   |  40 ++++++++++++
>  drivers/net/phy/marvell.c                  |  11 ++++
>  drivers/net/zynq_gem.c                     | 199 +++++++++++++++++++++++++++++++++++++++++-----------------
>  include/configs/zynq.h                     |  33 ++++++++--
>  include/netdev.h                           |   2 +-
>  13 files changed, 644 insertions(+), 83 deletions(-)
>  create mode 100644 drivers/i2c/zynq_i2c.c
>  create mode 100644 drivers/mmc/zynq_sdhci.c
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.