[U-Boot] drivers/mmc: move spl_mmc.c to common/spl

[Tom Rini]

On Thu, May 09, 2013 at 11:00:36PM -0000, ying.zhang at freescale.com wrote:

> From: Ying Zhang <b40530 at freescale.com>
> 
> The mpc85xx repuires a special layout on the memory device that is
> connected to the eSDHC controller interface. But the file spl_mmc.c
> didn't handle this specfic case, there needs a special treatmen, in
> the powerpc drictory. So, there is no longer to keep spl_mmc.c on
> mpc85xx, CONFIG_SPL_FRAMEWORK is not set.
> 
> When CONFIG_SPL_MMC_SUPPORT is set and CONFIG_SPL_FRAMEWORK is not
> set, there was an error in drivers/mmc/spl_mmc.c:
> 
> drivers/mmc/libmmc.o:(.got2+0x8): undefined reference to `spl_image'.
> 
> Now, the solution is to move the file "spl_mmc.c" to directory "common/spl".
> 
> Signed-off-by: Ying Zhang <b40530 at freescale.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130515/cb1715af/attachment.pgp>