[U-Boot] [PATCH 4/4] arm: factorize relocate_code routine
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri May 10 23:56:52 CEST 2013
Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
arch/arm/cpu/arm1136/start.S | 82 --------------------------------
arch/arm/cpu/arm1176/start.S | 75 ------------------------------
arch/arm/cpu/arm720t/start.S | 82 --------------------------------
arch/arm/cpu/arm920t/start.S | 75 ------------------------------
arch/arm/cpu/arm925t/start.S | 75 ------------------------------
arch/arm/cpu/arm926ejs/start.S | 82 --------------------------------
arch/arm/cpu/arm946es/start.S | 75 ------------------------------
arch/arm/cpu/arm_intcm/start.S | 75 ------------------------------
arch/arm/cpu/armv7/start.S | 78 -------------------------------
arch/arm/cpu/ixp/start.S | 75 ------------------------------
arch/arm/cpu/pxa/start.S | 84 ---------------------------------
arch/arm/cpu/s3c44b0/start.S | 75 ------------------------------
arch/arm/cpu/sa1100/start.S | 75 ------------------------------
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/relocate.S | 100 ++++++++++++++++++++++++++++++++++++++++
15 files changed, 101 insertions(+), 1009 deletions(-)
create mode 100644 arch/arm/lib/relocate.S
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index ab8fd56..4b3f828 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -167,88 +167,6 @@ next:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index f20da8e..6929b08 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -223,81 +223,6 @@ skip_tcmdisable:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index b85509c..afb40eb 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -149,88 +149,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 6250025..dbfca78 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -192,81 +192,6 @@ copyex:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 021e241..372b9e9 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -182,81 +182,6 @@ poll1:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 736361a..2ee591b 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -184,88 +184,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 9c2b70d..e31af6f 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -157,81 +157,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 5e8c528..9cce12f 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -153,81 +153,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 3ade510..bfdc22b 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -161,84 +161,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
-ENTRY(relocate_code)
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-
-relocate_done:
-
- bx lr
-
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-ENDPROC(relocate_code)
-
-#endif
-
ENTRY(c_runtime_cpu_setup)
/*
* If I-cache is enabled invalidate it
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 69ef8aa..f9594d0 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -255,81 +255,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index ada91a6..3078bec 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -170,90 +170,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
-/* Disable the Dcache RAM lock for stack now */
-#ifdef CONFIG_CPU_PXA25X
- mov r12, lr
- bl cpu_init_crit
- mov lr, r12
-#endif
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 7361aa2..4e1a444 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -138,81 +138,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 8a2eafd..c79f8c9 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -142,81 +142,6 @@ reset:
bl _main
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index ac51cc1..f8349c5 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -36,7 +36,7 @@ GLSOBJS += _umodsi3.o
GLCOBJS += div0.o
-SOBJS-y += crt0.o
+SOBJS-y += crt0.o relocate.o
ifndef CONFIG_SPL_BUILD
ifndef CONFIG_SYS_GENERIC_BOARD
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
new file mode 100644
index 0000000..ce533ca
--- /dev/null
+++ b/arch/arm/lib/relocate.S
@@ -0,0 +1,100 @@
+/*
+ * relocate - common relocation function for ARM U-Boot
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot at aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
+ */
+
+ .globl __image_copy_start
+ .globl __image_copy_end
+ .globl __rel_dyn_start
+ .globl __rel_dyn_end
+ .globl __dynsym_start
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ */
+ .globl relocate_code
+relocate_code:
+ mov r6, r0 /* save addr of destination */
+
+ ldr r0, =_start
+ subs r9, r6, r0 /* r9 <- relocation offset */
+ beq relocate_done /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, =__image_copy_end
+
+copy_loop:
+ ldmia r0!, {r10-r11} /* copy from source address [r0] */
+ stmia r1!, {r10-r11} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ blo copy_loop
+
+#ifndef CONFIG_SPL_BUILD
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, =_TEXT_BASE /* r0 <- Text base */
+ ldr r10, =__dynsym_start /* r10 <- sym table ofs */
+ ldr r2, =__rel_dyn_start /* r2 <- rel dyn start ofs */
+ ldr r3, =__rel_dyn_end /* r3 <- rel dyn end ofs */
+fixloop:
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
+ cmp r2, r3
+ blo fixloop
+#endif
+
+relocate_done:
+
+ bx lr
--
1.7.10.4
More information about the U-Boot
mailing list